Cordless Belt Sander
40Vmax XGT BL AWS 76 mm x 533 mm (3″ x 21″) Cordless Variable Speed Belt Sander with Anti-restart function
- 40Vmax XGT BL AWS 76 mm x 533 mm (3″ x 21″) Cordless Variable Speed Belt Sander with Anti-restart function
- High power similar or superior to corded model (9903) has been achieved by a 40Vmax XGT Li-Ion battery and a BL motor. The belt speed is less likely to drop when the belt is pressed hard.
- Optimal weight balance
The battery is positioned above the sanding belt on the front side of the tool. This ensures a uniform load on the sanding surface, enabling sanding with reduced unevenness.
- Angle adjustable LED job light
• The angle of the LED job light can be manually adjusted according to the working posture (from 15 degrees up to 30 degrees down, with the horizontal direction as 0 degrees).
• Twin LEDs with afterglow function
- Stationary use (Installed upside down)
The tool’s flat surface on top of the housing allows it to be used as a stationary belt sander with the optional Clamp complete and Guide rule set.
- Dust bag with anti-drop feature
We have adopted a new dust bag equipped with a lock mechanism. This keeps the dust bag from falling off due to its own weight when the tool is used vertically, such as when sanding walls.
- Angle adjustable front handle
• The front handle can be rotated without tools, and can be fixed every 30 degrees between 30 degrees to the rear and 60 degrees to the front, with the vertical direction as 0 degrees.
• Sanding to the edge of the wall is possible by fixing the front handle at 0 degrees vertically or 30 degrees to the rear.
- Lock-on / Lock-off function
• Continuous operation is improved by the lock-on function.
• The lock-off lever positioned on the trigger avoids unintentional activation of the tool and provides ease of operation.
- High water-resistance compatible with XPT (eXtreme Protection Technology)
- Compatible with AWS (Auto-start Wireless System)
- Belt size: 76mm x 533mm
- Variable speed control by dial
- Flush sanding (Front, right side)
- Connectable to vacuum cleaners for cleaner work environment
- Automatic belt position adjustment
- Optional sanding shoe available for precise sanding depth control
Pneumatic Framing Nailer
90 mm (3-1/2″) Pneumatic Framing Nailer, 21° Full Round Head
- 90 mm (3-1/2″) Pneumatic Framing Nailer, 21° Full Round Head
- Lightweight at 3.8 kg (8.3 lbs.)
- Quicker continuous driving on contact actuation mode
- Contact arm wiht sure-grip spikes minimizes slipping
- Ergonomically designed handle with sure grip for comfortable handling
- Nail loading from the upper opening of magazine is convenient to insert an additional strip
- Hook can be attached on either left/right side
- Drives up to 90 mm (3-1/2″) x 3.76 mm (.148″) nails
- 2-mode selector switch (contact, sequential) allows user control over nailing options
- Large capacity air chamber for increased power to drive nails varying in length from 50 mm (2″) to 90 mm (3-1/2″)
- Anti-dry mechanism stops tool when a few nails remain in the magazine
- “Tool-less” depth adjustment engineered for more precise flush and countersink nailing
- Rubber bumpers protect the tool and surface from damage
Cordless Air Compressor
40Vmax XGT BL Cordless Air Compressor
- Developed mainly for interior nailing applications e.g. finish nailing with 18 Ga nail
- Portable air station for regular pressure tools
- Low noise level, yet with excellent combination of high air flow and lightweight design
- Surrounding environment-friendly machine with low noise level
• A belt drive is used to reduce the motor speed to the proper one at the compression unit, featuring low noise level similar or lower than Competitor M
- Excellent combination of high air flow and lightweight design
• Both high air flow and lightweight design, which are similar to that of Competitor D, have been achieved by adjusting the compression unit and parts layout, increasing work efficiency and portability
- Quiet design for operator and crew comfort; ideal for indoor use
- Lightweight design for increased job site portability
- Complete roll-cage construction provides protection to withstand a variety of job-site, transporting, and storage environments
- Powered by 40Vmax XGT Li-Ion battery
- Carry handle with rubberized grip designed for easy transportation
- Rigid roll cage frame construction minimizes the chance of damage to the motor and compression units
- Oil-free pump design
Portable Power Pack
36V-40Vmax LXT XGT Li-Ion Portable Power Pack
- 1,200 Wh high capacity
- Our first over 1,000 Wh energy capacity battery
- Enables a DUB362 to operate over 1 hour at the highest speed (at dial 6)
- Equipped with built-in battery cells
- Compatible with 18Vx2 LXT, 40Vmax XGT, 36V direct power connection
- Quickly removable harness allows for use as a stationary power pack
- Height-adjustable waist belt for personal fit and comfort
- Main power switch with 8-hour auto-off function
- 4-LED fuel gauge indicates the battery status by four green LEDs
- Wet Guard/ IPX4 compatible when used with the compatible tool
- Intermediate connector between power tool and PDC1200 is automatically disconnected, if the cord from power tool is loaded with a certain weight or over
- Stand enables the user to stand PDC1200 upright on an appropriate workbench and to slip it on user’s back easily, regardless of the position of the waist belt
- Reflectors keep operator visible from a distance even in the dark
- Charger DC4001 specially designed for PDC1200
Pneumatic Coil Nailer
100 mm Pneumatic Pallet Coil Naile
- High durability for making/repairing of pallets or packaging applications
- Bump-fire allows for rapid fire shooting at the high speed required for making/repairing of pallets or packaging operation
Pneumatic Coil Nailer
45 mm (1-3/4″) Pneumatic Coil Naile
- Improved Trigger Valve Design Provides Quick Nail Driving in Contact Actuation Mode
- Superior nail driving power
- Ergonomically designed handle with soft grip provides increased comfort
- Flat contact arm for easy tar removal
- Easy-loading adjustable canister
- “Tool-less” depth adjustment engineered for more precise control and flush nailing
- “Tool-less” shingle guide designed for easy adjustments and consistent shingle placement
- Built-in magnet ensures last nail is driven
- Magnet around the nail path minimizes the last nail from falling out
- One-touch magazine opener allows to install coil nail easily
- Plastic magazine is protected with metal
- Housing guards protect the machine from being damaged or scratched
- Nose assembly can be easily removed for cleaning or maintenance
- Lightweight for less weight and more power
- Adjustable tool hook allows tool to remain close by but never in the way
Cordless Worklight
18V/14.4V LXT Li-Ion Cordless 12 LED Worklight, 3,000 Lumens
- 3 brightness settings: 3,000 lumens on high mode, 1,700 lumens on medium mode or 900 lumens on low mode
- Bright light with a max luminous flux of 3,000 lm
- Approx. 3 / 10 hours of continuous illumination with BL1850B battery at a constant illuminance on high / low mode (3,000 / 900 lm)
- Controller with memory function remembers the brightness setting last time you power off, allowing the user to avoid adjusting brightness again
- The lighting area can be adjusted by turning the individual lamp units
- LED color is daylight white, which is similar to the natural light and ideal for working spaces
- Highly stable tripod base which is expandable/foldable simply by sliding the carrying handle
- Telescopic light mast enables lighting at a height up to 2.2 m
- Light height is adjustable from 125-224 cm
- The light head consists of 3 small light heads, and each of them can be pivoted independently for wide area lighting
- Two locking latches are equipped with an adjust screw to tighten when the locking force becomes low
- IP55 certified dust and water resistance
- Padlocked battery cover for increased security
- Battery capacity warning function automatically notifies the user about reduction in battery capacity with the decrease of illuminance
- Battery port is located at the middle height of the worklight so that the user need not bend down to access the battery
- Shoulder belt can be easily slung over your shoulder for added mobility
- Foldable into a compact size for simple storage and transport
- Tripod is operable by pushing a lock-release button
- Tripod can be securely fixed to the ground with screws or pegs
Cordless Worklight
18V/14.4V LXT Li-Ion Cordless 12 LED Worklight, 3,000 Lumens
- 3 brightness settings: 3,000 lumens on high mode, 1,700 lumens on medium mode or 900 lumens on low mode
- Bright light with a max luminous flux of 3,000 lm
- Approx. 3 / 10 hours of continuous illumination with BL1850B battery at a constant illuminance on high / low mode (3,000 / 900 lm)
- Controller with memory function remembers the brightness setting last time you power off, allowing the user to avoid adjusting brightness again
- LED color is daylight white, which is similar to the natural light and ideal for working spaces
- Highly stable tripod base which is expandable/foldable simply by sliding the carrying handle
- Telescopic light mast enables lighting at a height up to 2.2 m
- Light height is adjustable from 125-224 cm
- Two locking latches are equipped with an adjust screw to tighten when the locking force becomes low
- IP55 certified weather and dust resistance
- Padlock hole for battery theft protection
- Battery capacity warning function automatically notifies the user about reduction in battery capacity with the decrease of illuminance
- Battery port is located at the middle height of the worklight so that the user need not bend down to access the battery
- Shoulder belt can be easily slung over your shoulder for added mobility
- Foldable into a compact size for simple storage and transport
- Tripod is operable by pushing a lock-release button
- Tripod can be securely fixed to the ground with screws or pegs
Cutter
110 mm (4-3/8″) 1,200W Cutter, Dry / Wet Type (country-specific)
- Powerful 1,200W motor delivers 13,000 RPM
- Redesigned base with grooved back surface for smoother operation
- Compact design at only 227mm (8-15/16″) long and weighs only 2.9kg (6.4 lbs) for less operator fatigue
- Easy alignment of base end with the cutting line on workpiece
- Water supply fixture can be mounted
- On-tool hex wrench for fast and easy blade changes and keeping it from lost
- Anti-slip dimples
- Specialized for right angle cutting only
- Flat rear end is convenient for replacing the diamond wheel
- Cuts up to 32mm (1-1/4″)
- Can be used with wet or dry type wheels. (country-specific)
- Easy to adjust depth gauge for precision cutting
- Large top handle design for increased comfort
- Lock-off button helps minimize accidental starts. (For tool with Lock-off button)
- Lock-on button for continuous use operation (For tool with Lock-on button)
- Double insulated for operator safety
- Externally accessible brushes for greater serviceability
- Screw and nut construction for high repairability
Battery Powered Wheelbarrow
18V X2 (36V) LXT BL 4-Wheel Battery Powered Wheelbarrow, Electric Lift, 300 Kg Capacity
- Max load capacity up to 300 kg (661 lbs)
• on flat ground (0 – 3 degrees): 300 kg (661 lbs)
• on slope (3 – 12 degrees): 180 kg (397 lbs)
- Electric lift
• The switch on the battery box enables the user to lift up the flat frame to 1,020mm above ground level electrically (elevated to 1,020mm in approximately 30 seconds)
• The electric lift is limited to use on a flat ground, therefore, the machine is equipped with a level gauge to check the leveling of the machine
- Compatible with various sizes of loads
• L x W: 965 x 645 (mm)
• The front, left, and right guards are designed to be easily lowered below the flat frame by lifting and sliding them, allowing for easy loading and unloading while dragging loads without lifting up them
- 4-wheel barrow (with front-wheel drive system) for stable load-carrying even with heavy loads
- XPT (eXtreme Protection Technology) / IPX4-compatible
High water-resistance allows to operate the machine even if it is wet with water
- Powered by two 18V LXT batteries in series
• Two or four batteries can be installed for a 2-series/2-parallel connection for a secure amount of work
• Equipped with a battery selection switch to choose which combination of 2 batteries to use
- Traveling speed change
• Selection of 3 Forward speeds and F/R rotation by push button
• Stepless variable speed control by switch trigger in each range
- Tubed tire (used for both front and rear wheels)
• No deformation and less air leakage even in long-term storage
• 2-piece split wheel is used for easy repair
- Driving wheels (Front wheels) touch the ground stably
Rear wheel axle is designed to tilt to enable Front wheels (driving wheels) to stably touch the ground for reliable driving even on bumpy road surfaces
- Double tires (Rear wheels only)
• Double tires, each of which rotates independently, improve swivel performance (especially in U-turn when the rear wheels swivel 180º)
• Small diameter double tire structure allows for low platform and high load capacity
- Swivel lock fixes the direction of rear wheels
- Headlights
• turn on/off by pressing a light button on the battery box
• turn off automatically with no operation for 10 minutes
- Red LED taillight
• indicates the presence of the wheelbarrow in the dark to oncoming drivers, walkers, etc
• lights up together with headlights at the same time by pressing a light button
• turns off automatically with no operation for 10 minutes
- Warning beeper
• can alert people around you
• Beep button is located on the inside of Switch box on Right handle
- Tool-less handle height adjustment
Handle height can be adjusted according to user’s height without tool simply by turning 2 knob screws
- Equipped with electric and electromagnetic brakes on top of hand lever-operated mechanical brake
- Neutral mode
• shuts off the power transmission between the motor shaft and the axle in case of no battery installation, low battery capacity or broken motor, enabling to drive the wheelbarrow manually
• Neutral lever is operable only when the hand brake lever is locked
