VL001G

Cordless Screed

40Vmax XGT Cordless Screed • VL001GZ
  • Overview: The VL001G is a cordless screed powered by a 40Vmax XGT Li-Ion battery, designed for concrete finishing and tamping applications. With interchangeable blades, it supports working widths of 900 mm, 1,400 mm, and 1,800 mm to suit a wide range of jobsite requirements. A lightweight design provides excellent maneuverability, while the brushless motor and constant speed control help maintain stable vibration performance for efficient finishing work.
  • A lightweight shaft drives an unbalanced weight near the blade, resulting in a lighter tool with excellent maneuverability.
  • Powered by an XGT battery and brushless motor, the tool delivers stable concrete finishing and tamping with constant speed control.
  • The rubber grip helps reduce hand vibration, and the wide grip area allows hand positions to be adjusted as needed.
  • The switch cover reduces the risk of concrete or similar materials causing the trigger and lock-on button to stick.
  • Interchangeable screed blades (Optional accessories) • Three blade lengths are available according to the work area: 900 mm / 1,400 mm / 1,800 mm • The blade can be attached and removed without tools using only the lever. • The blade is washable with water.
  • Compatible with Portable Power Packs for extended runtime. Approx. continuous runtime per full battery charge: • PDC1200: 1,200 min. • BL4040F: 150 min.
  • Anti-restart function minimizes accidental start-up.
  • High water-resistance with XPT (eXtreme Protection Technology)
  • Equipped with a lock-on button for comfortable continuous operation
  • The standard battery cover is compatible with BL4020/BL4025/BL4040/BL4040F. For other batteries, use Battery cover L or H (optional accessory): • BL4050F/BL4080F/BL4080H: Battery cover L • PDC01/PDC1200/PDC1500: Battery cover H

PB003G

Cordless Portable Band Saw

40Vmax XGT BL Cordless Variable Speed Portable Band Saw • PB003GZ
  • 40Vmax XGT battery and BL motor for high speed
  • BL motor delivers 3.2 m/s (630 ft./min.) blade speed for faster cutting
  • Right angle cutting available when used with an optional stand set.
  • Increased work efficiency: – Higher voltage XGT batteries reduce load current while maintaining the same output, minimizing heat generation in electrical components – Maintains band speed under heavy loads for superior efficiency compared with current models.
  • Stable cutting with highly rigid aluminum structure; Rigid aluminum die-cast frame and gear housing minimizes the blade from sliding off the wheel; The rigidity also allows for increasing the tension on the blade to minimize the blade from slipping on the wheel
  • Catch bracket designed to hit against workpiece in place of the tool body at the end of cutting process. It can protect the resin housing from scratches and damage.
  • Constant speed control minimizes the reduction in blade speed to provide stable cutting
  • Electric brake for maximum productivity and increased operator safety
  • Tool-less adjustable stopper plate; The fixing method has been changed from a bolt to a lever, allowing easy position adjustment without tools.
  • Easy blade track adjustment simply by turning the screw
  • Easy-to-grip handle with elastomer surface for anti-slip
  • Four LEDs job light with pre-glow and afterglow functions illuminates the work area
  • Easy right angle cutting: – Newly developed stand compatible with PB003G and the current model DPB183 – Achieve precise right-angle cuts easily with the new stand (Bevel cutting and Contour cutting*1 are not available. Maximum cutting capacity when connected to the stand: 55 mm) *1: Contour cutting: A cutting method similar to that used on the LB1200F, in which the workpiece is pressed against the blade.
  • Stable clamping vise: The Vise assembly is designed to slant backward so that it can press the workpiece against both the Guide fence and Base of the Drill stand at a time, providing secure and stable clamping.

UG001G

Cordless Ground Trimmer

40Vmax XGT Brushless 500 mm (19-3/4″) Cordless Ground Trimmer

  • Overview: The UG001G is a cordless ground trimmer powered by a 40Vmax XGT Li-Ion battery. T‑shaped hedge‑trimmer‑type shear blades set at 90° to the shaft enable push‑forward cutting without side‑to‑side swinging. The three‑wheel design allows the machine to stand on its own, reducing the holding effort and helping reduce operator fatigue during extended operation.
  • A 500 mm cutting width delivers high work efficiency
  • Tool-less wheel position adjustment to suit the user’s height
  • 258 mm wheel spacing delivers straight‑line stability.
  • Three-facet-ground teeth with curved tips reduce friction, maintaining cutting performance even when sap builds up on the shear blades.
  • Reciprocating blade design reduces stone and debris scattering compared to typical rotary‑blade grass trimmers.
  • An abrasion‑resistant sheet‑metal underplate enables ground‑sliding trimming.
  • Tool‑less handle height adjustment to three positions (1,020 / 910 / 790 mm) using a thumb nut to suit users of different heights.
  • Foldable handle reduces overall size for compact storage and easy transport.
  • Larger‑diameter, wider front wheels for smoother travel over uneven ground
  • A large rear tire enables self‑standing, lift‑free grass cutting, making operation easier for users of varying strength.
  • The cutting height can be adjusted without tools by loosening the lever and changing the front wheel position.
  • High water-resistance compatible with XPT (eXtreme Protection Technology)
  • Soft start feature for smooth start-up
  • Constant speed control for stable cutting operation
  • Anti-restart function minimizes accidental start-up.
  • Electric brake that stops the blades for user protection.

BS002G

Cordless Pipe Belt Sander

40Vmax XGT BL 40 x 760 mm (1-9/16″ x 30″) Cordless Variable Speed Pipe Belt Sander

  • Overview: The BS002G is a cordless pipe belt sander powered by a 40Vmax XGT Li-Ion battery. This tool is capable of grinding and polishing along curved surfaces such as stainless steel handrails and pipe welds.
  • Delivers high work efficiency with an XGT battery and a brushless motor, offering a wide range of belt speeds.
  • Variable speed control by dial for smooth polishing at low speeds and rust and paint removal at high speeds.
  • Maximum diameter of metal pipes for grinding: ø125 mm (5″)
  • Roller guides with raised edges designed to minimize belt disengagement.
  • Equipped with an electric brake and anti-restart function for user protection
  • Constant speed control for stable grinding, polishing, and finishing operations
  • Soft start feature for smooth start-up
  • High water-resistance compatible with XPT (eXtreme Protection Technology)
  • A wide range of abrasive belts are available as optional accessories for different applications: Abrasive belt for wood/metal, 40 x 760 mm, Zirconia, Z40 Abrasive belt for wood/metal, 40 x 760 mm, Zirconia, Z60 Abrasive belt for wood/metal, 40 x 760 mm, Zirconia, Z80 Abrasive belt for wood/metal, 40 x 760 mm, Zirconia, Z120 Abrasive nylon belt for metal surface conditioning, 40 x 760 mm (Coarse) Abrasive nylon belt for metal surface conditioning, 40 x 760 mm (Medium) Abrasive nylon belt for metal surface conditioning, 40 x 760 mm (Very fine) Abrasive felt belt for polishing, 40 x 760 mm (Soft)

UB005G

Cordless Backpack Blower

40Vmax XGT BL Cordless Variable-Speed Blower Vacuum • UB005GZ
  • Overview: The UB005G is a cordless blower vacuum powered by a 40Vmax XGT Li-Ion battery. This model is lightweight yet delivers high power and provides sufficient performance for professional outdoor cleaning tasks.
  • Two-speed modes with front‑button selection: • High mode delivers powerful blowing. • Low mode reduces small‑stone pickup when vacuuming leaves and extends blower runtime.
  • The variable-speed trigger allows for speed adjustments based on the application.
  • A cruise‑control lever helps reduce finger fatigue during continuous use.
  • Single‑action lever for selecting blower or vacuum mode
  • An LED job light with pre‑glow and afterglow makes it easier to spot leaves and debris in low‑light conditions.
  • Excellent balance for easy handling, even with a high‑capacity BL4080F or BL4080H battery installed
  • The tool‑less fan cover allows quick removal of accidentally vacuumed debris by loosening the thumb screw. * Motor interlock restricts startup for user protection unless the fan cover is properly closed.
  • Mulching blades finely shred leaves during vacuuming, reducing volume and emptying frequency.
  • The mode switch button provides tactile feedback for quick switching between high and low modes.
  • Wide nozzle with a redesigned opening and airflow path reduces clogging with fallen leaves.
  • Comfortable shoulder strap with thick padding reduces pressure on the shoulder contact area.
  • Two wheels at the nozzle tip support ground travel for easier handling and help reduce wrist fatigue.
  • 25 L dust bag with a large opening for easy emptying.
  • High water-resistance compatible with XPT (eXtreme Protection Technology)

DML819

Cordless Magnetic Light

18V LXT Li-Ion LED Magnetic Light, 1,200 Lumens

  • When performing maintenance work on construction machinery or heavy equipment, the tool can be attached and fixed to ferrous metal parts with the magnet, allowing for hands-free work.
  • Without losing high brightness illumination at hand, this worklight is engineered so compact and so handy to hold with one hand that it can be attached easily to tight spaces.
  • Max luminous flux: 1,200 lm – High/Medium/Low: 1,200/800/500 (lm) – Sufficient lighting time even at maximum luminous flux
  • Compact design; This model is superior to our current worklight models and competitors’ models in saving space both in usage and storage, because they are engineered with a minimum body size required to achieve a maximum luminous flux of 1,200 lm.
  • Lightweight design: 1.2 kg with BL1815N, 1.6 kg with BL1860B, 2.2 kg with BL18120
  • Diffusing lens reduces verlapping shadows and glare to reduce strain on the eyes.
  • Foldable rotating LED head – 180° vertical – 300° horizontal (90°right/210°left)
  • Magnetic bars are embedded in the bottom face which can be fixed to ferrous metals.
  • Magnet cover (Standard equipment): – Magnetic bars can be covered with Magnet cover for anti-adherence of ferrous metals such as iron powder, screws, etc. – Can be used also as a handy portable worklight, with the cover closed for reduced magnetic force. – Can be stored on the back of the light
  • Handle with a shape that is easy to hold and pull when removing the worklight fixed with the magnet
  • Battery capacity warning function: When the battery is getting close to empty, this function will warn user by disabling 11 out of 12 LEDs to light up only one LED, which will turn off after 5 minutes.
  • Gradual illumination relieves the stress on user’s eyes.

ML013G

Cordless Magnetic Light

40Vmax XGT Li-Ion LED Magnetic Light, 1,200 Lumens

  • When performing maintenance work on construction machinery or heavy equipment, the tool can be attached and fixed to ferrous metal parts with the magnet, allowing for hands-free work.
  • Without losing high brightness illumination at hand, this worklight is engineered so compact and so handy to hold with one hand that it can be attached easily to tight spaces.
  • Max luminous flux: 1,200 lm – High/Medium/Low: 1,200/800/500 (lm) – Sufficient lighting time even at maximum luminous flux
  • Compact design; This model is superior to our current worklight models and competitors’ models in saving space both in usage and storage, because they are engineered with a minimum body size required to achieve a maximum luminous flux of 1,200 lm.
  • Lightweight design: 1.6 kg with BL4025, 1.8 kg with BL4040
  • Diffusing lens reduces verlapping shadows and glare to reduce strain on the eyes.
  • Foldable rotating LED head – 180° vertical – 300° horizontal (90°right/210°left)
  • Magnetic bars are embedded in the bottom face which can be fixed to ferrous metals.
  • Magnet cover (Standard equipment): – Magnetic bars can be covered with Magnet cover for anti-adherence of ferrous metals such as iron powder, screws, etc. – Can be used also as a handy portable worklight, with the cover closed for reduced magnetic force. – Can be stored on the back of the light
  • Handle with a shape that is easy to hold and pull when removing the worklight fixed with the magnet
  • Battery capacity warning function: When the battery is getting close to empty, this function will warn user by disabling 11 out of 12 LEDs to light up only one LED, which will turn off after 5 minutes.
  • Gradual illumination relieves the stress on user’s eyes.

DBN620

Cordless Finish Nailer

18V LXT Brushless BL Cordless 15 Ga 64 mm (2-1/2″) Finish Nailer

• DBN620Z

• DBN620RFJ
  • Overview: The DBN620 is a 64 mm (2-1/2″) cordless finish nailer compatible with 15 gauge finish nails (angled-type), powered by an 18V LXT Li-Ion battery. Featuring a pneumatic spring mechanism, the recoil when driving nails is lighter and it offers a feel similar to pneumatic nailers, making it suitable for interior work and other nailing tasks. It is reliably able to drive 15 gauge finish nails up to 64 mm into hard woods such as red oak, while maintaining sufficient work capacity. Without the hassle of a compressor and hose, the lightweight design offers better maneuverability and zero ramp-up time. It is designed to ensure the center of gravity remains optimal regardless of which compatible battery is attached, making it easy to aim and reducing arm strain and fatigue.
  • Rapid firing capability of 3.2 shots per second
  • Drives a range of 15 gauge finish nails from 32 mm (1-1/4″) to 64 mm (2-1/2″); magazine capacity up to 100 nails
  • 2-mode selector switch for Full sequential actuation mode (for single nailing) or Contact actuation mode (for continuous nailing)
  • Slim nose with an easy-to-aim ejection section for better visibility when driving nails
  • Anti-dry fire mechanism avoids dry firing by locking the contact arm when the remaining nails are between 4 and 6.
  • Easy to use toolless depth adjustment dial for a wide variety of finish applications
  • Built-in LED light illuminates the work area
  • Ergonomically designed handle with soft grip provides increased comfort
  • Nails can be removed without tools in case of jamming
  • Nail view window enables fast identification of remaining nail capacity
  • Water-resistance compatible with XPT
  • Hook can be attached to the left and right sides.

Battery and charger are sold separately.

DBN501

Cordless Brad Nailer

18V LXT Cordless 18 Ga 50 mm (2″) Brad Nailer

• DBN501Z

• DBN501RFJ
  • Overview: The DBN501 is a 50 mm (2″) cordless brad nailer compatible with 18 gauge brad nails, powered by an 18V LXT Li-Ion battery. Featuring a pneumatic spring mechanism, the recoil when driving nails is lighter and it offers a feel similar to pneumatic nailers, making it suitable for interior work and other nailing tasks. It is reliably able to drive 18 gauge brad nails up to 50 mm into hard woods such as red oak, while maintaining sufficient work capacity. Without the hassle of a compressor and hose, the lightweight design offers better maneuverability and zero ramp-up time. It is designed to ensure the center of gravity remains optimal regardless of which compatible battery is attached, making it easy to aim and reducing arm strain and fatigue.
  • Rapid firing capability of 5.4 shots per second
  • Drives a range of 18 gauge brad nails from 15 mm (9/16″) to 50 mm (2″); magazine capacity up to 110 nails
  • 2-mode selector switch for sequential or bump fire mode
  • Slim nose with an easy-to-aim ejection section for better visibility when driving nails
  • Anti-dry fire mechanism avoids dry firing by locking the contact arm when the remaining nails are between 5 and 7.
  • Easy to use toolless depth adjustment dial for a wide variety of finish applications
  • Built-in LED light illuminates the work area
  • Ergonomically designed handle with soft grip provides increased comfort
  • Nails can be removed without tools in case of jamming
  • Nail view window enables fast identification of remaining nail capacity
  • Water-resistance compatible with XPT
  • The belt hook is convenient for temporarily hanging the tool.
  • The rubber bumpers protect workpieces from scratches or damage

UC033G

Cordless Chain Saw

40Vmax XGT BL Cordless 400/450/500mm (16/18/20″) Rescue Chain Saw
  • Overview: The UC033G is a cordless 400/450/500mm rear-handle chain saw designed for rescue operations and powered by a 40Vmax XGT Li-Ion battery. Based on the UC030G, which is a cordless 400/450/500mm rear-handle chain saw comparable to 50cc-class chain saws, this model delivers increased maximum cutting torque through revised motor control. With the carbide‑tipped M53RK rescue saw chain, the tool is capable of cutting slate (stone‑based panels), roofing materials such as sheet steel, and tempered glass.
  • 50% higher maximum cutting torque than the UC030G, enabling high‑load tasks such as cutting through doors in rescue operations.
  • With the M53RK rescue saw chain, the tool is capable of cutting 0.8 mm sheet steel used in wall materials.
  • A removable depth limiter enables easy cutting‑depth adjustment when performing plunge‑cutting in rescue operations.
  • Wrap‑around front handle enables a secure right‑side grip for stable horizontal operations.
  • High‑brightness LEDs with four icons, a responsive button, and a simplified control interface (no speed selection) provide clear, intuitive operation.
  • Fast acceleration in response to trigger operation enables smooth, continuous cutting.
  • IPX4M-rated for use in rainy conditions
  • When excessive force is applied, the tool slows down, making it easy to adjust the load on the cutting edge.
  • A shorter distance between the handle and hand guard allows quick and easy brake release.
  • The air filter cover can be removed without tools, making cleaning easy and keeping debris out.
  • If the tool locks due to load, it resumes operation instantly when the load is released without retriggering.
  • Equipped with both mechanical and electric brakes for user protection
  • The metal spike bumper firmly grips the workpiece, providing better control and easier cutting.
  • Ergonomic soft grip for non-skid operation
  • Adjustable automatic chain lubrication with a large oil reservoir
  • The chain oil view window allows the operator to easily check the oil level.
  • Captive nuts prevent nut loss during guide bar or saw chain replacement.
  • On‑board tool holder for the guide bar wrench

DUC258

Cordless Chain Saw

18V LXT Brushless Cordless 200/250mm (8/10″) Chain Saw

• DUC258Z • DUC258RTE
  • Overview: The DUC258 is a cordless 200/250mm top-handle chainsaw powered by an 18V LXT Li-Ion battery. Designed based on our 23-cc class model suitable for pruning, this model is lighter and offers enhanced maneuverability.
  • Excellent tool balance with optimal center of gravity, reducing strain on the arms during horizontal cutting.
  • Fast acceleration in response to trigger operation enables smooth, continuous cutting tasks like pruning.
  • When excessive force is applied, the tool slows down, making it easy to adjust the load on the cutting edge.
  • If the tool locks due to load, it resumes operation instantly when the load is released without retriggering.
  • Hook for quick one-handed attachment and removal
  • Main power button with tactile feedback and clear warning indicator
  • Water-resistance compatible with XPT (eXtreme Protection Technology)
  • The variable speed trigger allows for speed adjustments based on the material or application.
  • Adjustable automatic chain lubrication with 140 mL oil reservoir
  • The chain oil view window allows the operator to easily check the oil level.
  • Equipped with both mechanical and electric brakes for user protection
  • Captive nut prevents nut loss during guide bar or saw chain replacement.
  • Ergonomic, rubberized soft grip for a secure hold and added comfort

UB004G

Cordless Backpack Blower

40Vmax XGT BL Cordless Variable 2-Speed Blower • UB004GZ
  • Overview: The UB004G is a cordless backpack blower equipped with dual battery ports for 40Vmax XGT Li-Ion batteries*1. When used with the high-output BL4080H battery, the blower delivers blowing force comparable to that of a 65 cc-class engine backpack blower, while its lightweight design improves maneuverability and helps reduce fatigue. *1 The blower runs on one battery at a time, and automatically switches to the second battery when the first one runs out.
  • The narrow-diameter nozzle delivers high air velocity to clear even wet fallen leaves.
  • Compared with the previous model, the lower battery weight enabled the use of a resin frame, resulting in a lighter machine with improved maneuverability.
  • The redesigned backpack harness provides improved wearing comfort: • Mesh harness and belt fabrics provide better breathability. • Redesigned shoulder straps help reduce strain on the shoulders. • Waist belt (sold separately) further reduces arm and shoulder load.
  • Two speed modes with a tactile-feedback mode button: • Mode 2: Powerful blowing at maximum blowing force. • Mode 1: Reduced power for longer runtime.
  • Push-button cruise control holds the selected blowing force, helping reduce finger fatigue during continuous use. Pulling the trigger further increases output up to maximum.
  • High-brightness LEDs make it easy to check the machine status.
  • Variable speed trigger offers control similar to that of an engine backpack blower.
  • The telescopic nozzle offers stepless length adjustment over a range of 250 mm.
  • The nozzle can be secured to the harness with a one-touch buckle for compact storage.
  • The hook hole on the back side can be used for wall storage.
  • The grip position can be adjusted to suit the operator’s body size and working posture — 180 mm front-to-rear and 90° to the left and right.
  • The three-dimensional air intake reduces the risk of airflow blockage from fallen leaves and debris.
  • The end nozzle can be changed according to the application: • End nozzle 71: For higher air velocity • End nozzle 81 (sold separately): For higher air volume • Flat nozzle: Suitable for wide-area blowing
  • The brushless motor provides powerful blowing across wide areas.
  • High water-resistance with XPT (eXtreme Protection Technology)