DEZML187

Rechargeable Flashlight

18V / 14.4V Li-Ion Rechargeable 9 LED Flashlight, 48 Lumens, G-Battery

  • 18V / 14.4V Li-Ion Rechargeable 9 LED Flashlight, 48 Lumens, G-Battery
  • 9 LEDs for wide and bright illumination
  • 9 LEDs provide approximately 15 hours of continuous illumination on a single full battery charge
  • Almost no need for bulb replacement thanks to the use of long-lasting LED as the light source
  • 4 Position pivoting flashlight head
  • Ergonomically designed handle with rubberized soft grip
  • The G-series range from Makita is a different lithium-ion battery platform to the Makita LXT range of professional cordless power tools, and is powered exclusively by the G-series battery and DC18WA charger
  • Produced to a quality far exceeding that of DIY products, the G-series range offers a comprehensive catalogue of tools at an attractive market price
  • The G-Series battery is identifiable by the white or grey top section, and offers a 1.5 amp hour battery capacity in both 14.4V and 18V platforms
  • A 60-minute charge time is achieved with the G-Series DC18WA battery charger

DEWDML801

LED Flashlight

18V / 14.4V LXT Li-Ion 12 LED Flashlight, 240 Lumens

  • 18V / 14.4V LXT Li-Ion 12 LED Flashlight, 240 Lumens
  • Extra Bright 12 LED Flashlight Provides 240 Lumens
  • Flashlight head folds up and down with 7 positive stops and rotates left to right for multiple lighting angles
  • Metal hang hook swivels 360° and folds away for extra convenience
  • 2-Mode on/off switch delivers either full brightness (240 lumens) with 12 L.E.D. or half brightness (120 lumens) with 6 L.E.D
  • Up to 20 hours of continuous illumination in 12 LED mode with BL1860B
  • Up to 48 hours of continuous illumination in 6 LED mode with BL1860B
  • Compact and ergonomic design at only 380 mm (15″) long
  • Lightweight for reduced operator fatigue
  • Rubberized soft grip provides increased comfort on the job

USZDML815

LED Flashlight

18V / 14.4V LXT Li-Ion LED Flashlight, 160 Lumens

  • Up to 54 Hours of Illumination with BL1860B
  • High-luminance 4 x 0.5 W LED flashlight provides 160 lumens
  • 12 position pivoting flashlight head with positive stops from 0º – 170º
  • Lightweight plastic flashlight head for operator comfort
  • LED provides a sharp, round spotlight
  • Compact and ergonomic design at only 272 mm (10-3/4″) long
  • Soft grip provides increased comfort on the job
  • Metal hang hook (Strap hook) is convenient and job site durable
  • An ideal addition to any toolbox or workshop

TW010G

Cordless Impact Wrench

  • 40Vmax XGT BL Cordless 1″ (25.4 mm) 3,150 N·m (2,320 ft.lbs.) Impact Wrench, Forward/Reverse Rotation Auto Stop Mode
  • Model TW010G is a cordless 25.4mm (1″”) square drive D-handle impact wrench powered by a 40Vmax XGT Li-Ion battery • This model provides an excellent combination of high torque and maneuverability, aiming to replace air impact wrenches for tightening large diameter bolts. • This model is equipped with a long anvil.
  • High-torque and Excellent maneuverability • Square drive: 25.4mm (1″”) • The hammer is designed to be larger in the radial direction to efficiently increase the moment of inertia of the hammer, providing an excellent combination of high torque and maneuverability while suppressing increase in hammer size. • By designing the motor to be positioned vertically, we have achieved a reduction in the overall length of the tool and a suppression of the reaction force on the hand at startup.
  • Trigger switch with full speed mode (Variable speed / Full speed) • Full speed is reached with less trigger pull, reducing fatigue in continuous operation. • Variable speed mode or Full speed mode can be selected depending on applications.
  • Ring illumination LED • The use of a ring illumination LED reduces the shadow of the socket on a workpiece, providing a better view of the workpiece. • With preglow/afterglow functions and light mode
  • Toolless installation of Side handle Side handle can be installed 360° without a tool, and the angle of the holding section can be adjusted back and forth, making it suitable for a variety of operations.
  • Auto-stop system available in both forward/reverse rotation modes 3 modes of reaction time for automatic stop available both in forward and reverse rotation modes
  • Rubber joint The housing section for battery installation, which is independent of the main body of the tool, has a rubberized anti-vibration structure that suppresses chattering of the terminals and wear of the battery rails.
  • Tool hanger (Ring) allows to hang the tool on pipes, hooks, etc.
  • Two-finger trigger shaped for easy pulling even with a gloved hand
  • Equipped with a BL motor
  • Variable speed control by trigger
  • Compatible with XPT (eXtreme Protection Technology)
  • Electronic 4 stage impact power selection for added versatility
  • Optional sockets for added versatility

PP001G

Cordless Hole Puncher

  • 40Vmax XGT BL Cordless Hole Puncher
  • High-efficiency punching • Equipped with the 40Vmax XGT Li-Ion battery and a high-power BL motor, the operating speed has been improved by approx. 85% compared to the existing 18V LXT model, DPP200 • This double-acting puncher hydraulically operates the punching holes and lifting. It eliminates the snagging with the material during lifting, enabling smooth operation
  • Compatible with various steel materials This tool supports hole punching up to a maximum plate thickness of 9mm and a hole diameter of ø20mm, and hole punching processing for common steel, stainless steel, channel steel, aluminum and copper
  • 360° rotatable motor section The motor section can be rotated to flexibly respond to site conditions
  • Return lever In case of punching trouble, the punching section can be returned to its original position with the return lever
  • Compact design By redesigning the motor housing, the tool has become 19mm shorter compared to the existing 18V LXT model, DPP200, achieving a compact design

PF0410

Submersible Pump

  • 25 mm (1″) 400 W Dirty Water Submersible Pump
  • Versatile line up to cover a wide range of user needs
  • Float switch automatically switches off the motor to protect the pump from running dry when the water level falls below the capacity, then automatically switches on when water level rises
  • In compliance with IP68 standards
  • For dirty water
  • Dirt water pump for heavy contaminated water
  • Best for dewatering cellars, bassins and garden lakes
  • Rigid plastic housing
  • Professional pump for dirt water contaminated with up to 35mm particles
  • Double gasket with oil depot inbetween ensures a long life period of the engine unit
  • Automatic shutoff with adjustable float lever
  • Comfortable transportation with solid and ergonomically formed handle
  • Highly reliable

XGH01ZK

Cordless Heat Gun

  • 18V LXT Cordless Heat Gun
  • Max 550 degrees Celsius air temperature for a wide range of cordless works, e.g. putting up wall paper, drying or removal of paint, and more
  • Max air flow of 200 L/min; Almost as powerful as Competitors’ DC machines
  • Quick release mechanism for easy Nozzle replacement; Nozzle can be removed without touching the hot metal part simply by turning Plastic ring
  • Up to 21 minutes of continuous run time with 18V LXT 6.0Ah Battery BL1860B (battery not included)
  • Trigger switch with lock-on and lock-off functions
  • Compatible with current nozzles for AC machines for increased versatility
  • Single LED job light with after-glow function illuminates the work area
  • Compact and ergonomic design
  • Lightweight for reduced operator fatigue
  • Rubberized soft grip provides increased comfort on the job
  • Without adjustment function of air temperature and volume
  • Hanging hook for increased operator convenience
  • Anti-restart function engineered to minimize motor start up when battery is inserted with switch locked on
  • Overload protection (fuse)
  • Reduction nozzle; Welding the sheet from the surface of the sheet
  • Reflector nozzle; Bending plastic tube
  • Wide-slot nozzle; Shrink wrapping
  • Glass protection nozzle; For drying/ softening putty while protecting glass
  • Overlap welding nozzle (slot top); Welding the sheet from the bottom of the sheet

TW002G

Cordless Impact Wrench

  • 40Vmax XGT BL Cordless 1/2″ (12.7 mm) 1,700 N·m (1,250 ft.lbs.) Impact Wrench, Reverse Rotation Auto Stop Mode
  • This model has been developed based on TW001G, and the tip shape of the anvil has been changed from the 19mm (3/4″) square drive to a 12.7mm (1/2″) square drive, making the tool suitable for tasks such as chassis maintenance and construction site work, where the 12.7mm (1/2″) square drive and high torque are used.
  • High torque but compact overall length for easy handling and control
  • Electronic 4 stage impact power selection for added versatility
  • 3 modes of reaction time for automatic stop available both in forward and reverse rotation modes
  • Trigger switch with full speed mode allows for less hand and finger fatigue
  • Style of socket retention: C ring
  • Reverse Rotation Auto Stop Mode stops after the bolt/nut loosened enough
  • Twin LED job light ×2 with preglow and afterglow functions Even when a large socket of M27 or larger is attached to the tool, another LED job light added above the battery provides bright illumination on the socket and workpiece.
  • Powered by 40Vmax XGT Li-Ion battery
  • BL motor delivers 1,700 N·m (1,250 ft.lbs.) of max torque and 2,200 N∙m (1,620 ft.lbs.) of nut-busting torque
  • BL motor is electronically controlled to optimize battery energy use for longer run time per charge
  • BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
  • Excellent performance in continuous heavy duty applications
  • Ergonomically designed handle with rubberized soft grip
  • High water-resistance compatible with XPT
  • Electric brake stops the rotation gently but fast, allowing user to quickly resume operation
  • Reversing switch is conveniently located
  • Durable, reversible hook convenient for temporary tool hanging
  • Battery protection circuit protects against overloading, over-discharging and over-heating

TW009G

Cordless Impact Wrench

  • 40Vmax XGT BL Cordless 1″ (25.4 mm) 3,150 N·m (2,320 ft.lbs.) Impact Wrench, Forward/Reverse Rotation Auto Stop Mode
  • Model TW009G is a cordless 25.4mm (1″”) square drive D-handle impact wrench powered by a 40Vmax XGT Li-Ion battery • This model provides an excellent combination of high torque and maneuverability, aiming to replace air impact wrenches for tightening large diameter bolts. • This model is equipped with a short anvil.
  • High-torque and Excellent maneuverability • Square drive: 25.4mm (1″”) • The hammer is designed to be larger in the radial direction to efficiently increase the moment of inertia of the hammer, providing an excellent combination of high torque and maneuverability while suppressing increase in hammer size. • By designing the motor to be positioned vertically, we have achieved a reduction in the overall length of the tool and a suppression of the reaction force on the hand at startup.
  • Trigger switch with full speed mode (Variable speed / Full speed) • Full speed is reached with less trigger pull, reducing fatigue in continuous operation. • Variable speed mode or Full speed mode can be selected depending on applications.
  • Ring illumination LED • The use of a ring illumination LED reduces the shadow of the socket on a workpiece, providing a better view of the workpiece. • With preglow/afterglow functions and light mode
  • Toolless installation of Side handle Side handle can be installed 360° without a tool, and the angle of the holding section can be adjusted back and forth, making it suitable for a variety of operations.
  • Auto-stop system available in both forward/reverse rotation modes 3 modes of reaction time for automatic stop available both in forward and reverse rotation modes
  • Rubber joint The housing section for battery installation, which is independent of the main body of the tool, has a rubberized anti-vibration structure that suppresses chattering of the terminals and wear of the battery rails.
  • Tool hanger (Ring) allows to hang the tool on pipes, hooks, etc.
  • Two-finger trigger shaped for easy pulling even with a gloved hand
  • Equipped with a BL motor
  • Variable speed control by trigger
  • Compatible with XPT (eXtreme Protection Technology)
  • Electronic 4 stage impact power selection for added versatility
  • Optional sockets for added versatility

HR2670

Combination Hammer

  • 26 mm (1″) 3.0 J Combination Hammer, SDS-PLUS
  • Increased power and durability have been achieved by redesigning the internal structure while enhancing cost competitiveness by modifying the motor specifications from model HR2470.
  • Equipped with three operation modes (Rotation only / Hammering only / Rotation + hammering)
  • Powerful 800 W motor delivers 3.0 J of impact energy to handle the most demanding applications
  • Dust cup (Optional accessory) • Compact and highly visible dust cup • The bellows for drilling and for chiseling can be exchanged with one touch.
  • Compatible with SDS-PLUS shank
  • Torque limiter engineered to minimize gear damage by automatically disengaging gears if the bit binds
  • Recessed lock-on button for continuous use
  • One-touch sliding chuck for quick bit changes
  • Variable speed control enables user to match the speed to the application
  • Speed and torque in reverse are the same as forward rotation by using brush holder unit
  • Connectable to Makita vacuum cleaners
  • Double insulated

DTD173

Cordless Impact Driver

  • 18V LXT BL Cordless Wood/Bolt/T-Mode 180 N·m (1,590 in.lbs.) Impact Driver
  • We have reduced the operator’s burden and improved operability by revising the layout of the battery and the switch panel from DTD172 and slimming down the entire circumference of the head.
  • Illumination shadows have been significantly reduced by adopting a ring illumination LED.
  • Slim tool body The protrusions on the LED sections on both sides have been eliminated, improving the screwdriving performance in tight corners or confined spaces.
  • Ring illumination LED • The LED emits light in a ring shape from the tip of the hammer case, significantly reducing the shadow of the bit. • The brightness (3 stages) can be changed by pressing and holding the mode switch button.
  • Easy-to-see Switch panel The switch panel has been moved to the rear side of the battery, allowing the user to check and change the mode during operation.
  • Optimal battery layout The center of gravity has been moved closer to the center line of the grip, by locating the battery 12mm backward compared with the current model, reducing the strain on the wrist during operation.
  • Light mode • To turn on the light, set F/R change lever in the neutral position and pull the switch trigger. To turn off the light, pull the switch trigger again. • The light turns off automatically one hour after turned on. • In the light mode, the brightness (3 stages) can be switched by briefly pressing the mode switch button.
  • Compact design with an overall length of 111mm The total length has been reduced by 3mm by revising the structure of the mechanical part.
  • BL motor delivers 3,600 max RPM and 180 N·m of max torque
  • Variable speed control by trigger
  • Equipped with Quick mode-switching button
  • 4-stage impact power selection
  • One-touch bit installation • Reduced resistance allows for easier bit installation • Designed to hold the bit more securely
  • Water-resistance compatible with XPT
  • Equipped with Hook
  • Anti-bit wobbling structure
  • Assist mode (for thin and thick metal, wood, and bolt)
  • Ergonomically designed handle

VC2512L

Vacuum Cleaner

  • 21 L Dust Class L Vacuum Cleaner (Wet & Dry)
  • Approved for Dust Class L in accordance with the EU standard
  • For both wet and dry vacuum cleaning
  • Best suitable for working with power tools
  • Push & Clean semi-automatic filter cleaning system for extended operating time and filter life
  • When working with electric drilling, sanding or cutting tools the automatic start/stop function activates the machine when a connected power tool is used
  • For wet and dry vacuum cleaning
  • Washable PET fleece filter for use with dry or wet materials
  • Convenient integrated carry handle for easier transportation
  • Innovative hose storage solution with flexible rubber strap
  • Simple connection to Makita Power Tools