DSC251

Cordless Steel Rod Cutter

18V LXT BL ADT Cordless 25 mm (1″) Steel Rod Cutter
  • Excellent Flush Cutting
  • Flangeless blade can be equipped
  • Ideal for edge cutting of threaded rods and rebars
  • Fine edge cutting: Rebars can be cut at 2.5 mm from the corner of lattice for both vertically and horizontally; Threaded rods can be cut also at 2.5 mm from the ground/surface
  • Less damage to the threaded rods and therefore nuts can be installed without removing burrs
  • ADT (Automatic torque Drive Technology) adjusts speed and torque during operation for optimum performance
  • BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
  • BL motor is electronically controlled to optimize battery energy use for longer run time per charge
  • BL motor efficiently uses energy to match torque and RPM to the changing demands of the application
  • 3-position removable side grip allows operator to hold tool at comfortable position
  • Surface treatment of base cover minimizes abrasion at cutting
  • Dust bag collects chips or shavings left after cutting metal
  • Cutting capacity range of 10 – 25 mm (3/8″ – 1″) standard rebar
  • Highly visible, heavy-duty fluorescent material guide holds the rebar at 90° to the cutting blade and assists in smooth cutting
  • Ergonomic handle with soft grip provides increased comfort on the job
  • Spark free cutting of rebar and steel rod ideal for use in sensitive areas
  • Wire mesh intake covers are engineered to minimize debris from entering motor
  • Lightweight for reduced operator fatigue
  • 3-stage LED gauge indicates battery charge level / overheating / overload. Battery protection circuit protects against overloading, over-discharging and over-heating. Up to 50 cuts of 25 mm rebar with a 5.0Ah LXT battery. Up to 90 cuts of 19 mm rebar with a 5.0Ah LXT battery. Up to 135 cuts of 16 mm rebar with a 5.0Ah LXT battery. Up to 200 cuts of 13 mm rebar with a 5.0Ah LXT battery. Up to 300 cuts of 10 mm rebar with a 5.0Ah LXT battery

TR001G

Cordless Rebar Tying Tool

40Vmax XGT BL Cordless Rebar Tying Tool

  • Overview: The TR001G is a cordless rebar tying tool powered by a 40Vmax XGT Li-Ion battery. Powered by an XGT battery and equipped with dual BL motors, the tool delivers high tying strength and speed using 1.6 mm wire. Equipped with a wire pullback mechanism, the tool pulls back the wire while holding its tip, allowing the rebars to be tightly and securely tied.
  • Capable of tying a wide range of rebar sizes, from small to large diameters
  • Dual BL motors for twisting and feeding ensure stable tying with 1.6 mm wire.
  • One-step wire reel loading is enabled by a linked cover and gear mechanism.
  • Clockwise wire twisting minimizes the chance of unintentional loosening when retightening by hand.
  • Tying strength is easily adjustable via the panel to suit different rebar combinations.
  • Tying strength (compared to our 18V models): • D10 × D10 rebar: approx. 300% increase • D22 × D22 rebar: approx. 200% increase
  • The hook fits up to D19 rebars for easier tool hanging.
  • Ergonomic rubberized soft grip for increased comfort
  • High water-resistance compatible with XPT (eXtreme Protection Technology)
  • Equipped with a main power switch and a trigger lock function for enhanced control
  • The optional extension handle enables the operator to tie rebars while standing.

DJR187

Cordless Recipro Saw

18V LXT BL Brushless Cordless Recipro Saw
  • Higher cutting speed (Max 3,000 SPM) and modified stroke length (32 mm) provide higher cutting efficiency
  • Newly designed vertical crank mechanism minimizes blade deflection and reduces vibration to machine
  • Higher durability thanks to More durable mechanism to hold slider and More rigid shoe
  • BL Brushless DC motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
  • BL Brushless DC motor with high power to weight and size ratio
  • More compact and lightweight design for easy handling and high maneuverability
  • Toolless shoe adjustment; Lever system is employed instead of button system. It minimizes the blade lock from unintensional releasing
  • Toolless blade change; Redesign of blade clamp makes it easier to remove a blade
  • Retractable rafter hook allows to hang the machine on ladder rungs or guard rails of aerial work platform
  • Ergonomically designed handle with elastomer for more comfortable and controlled operation
  • Ergonomically designed handle fits your hand well, even during difficult cutting applications such as overhead application, cutting with the saw upside down, etc
  • Soft grip provides more comfort and control
  • Electric 2 speed provides ideal RPM of high speed for for wooden cutting and low speed for metal cutting
  • Variable speed trigger for added convenience
  • LED job light with preglow and afterglow functions illuminates cutting area
  • Large 2-finger trigger for added convenience
  • Electric brake for increased operator safety
  • XPT (eXtreme Protection Technology) for use in outdoor applications or harsh environments, protection from dust and dripping water is enhanced

9556HP

Angle Grinder

100 mm (4″) 840 W Angle Grinder, Paddle Switch
  • Reliable machined gears provide twice or more longer service life
  • Powerful 840 W motor delivers 11,000 RPM for high output power
  • Compact design with small diameter barrel and lightweight for added comfort
  • Protective zig-zag varnish seals the armature from dust and debris for longer tool life
  • Thicker coil wires are wound more closely to reduce heat and energy loss
  • AC/DC switch for use with alternative power source (North America only)
  • Labyrinth construction seals and protects the drive gear and bearings from contamination for longer tool life
  • Dust-proof ball bearing on spindle for durability
  • O rings for protection from grease-leakage
  • Spiral bevel gears for smoother rotations and a more efficient transfer of energy
  • Large paddle switch for easy operation right or left handed
  • Lock-off button built in the center of paddle lever
  • Side grip can be positioned on both sides for operator convenience
  • Wheel cover protects operator from accidental scattering of broken wheel or workpiece with minimal wheel cover movement
  • Push button spindle lock for operator convenience
  • Gear housing can be rotated to suit most cutting and grinding applications
  • Use of a woodruff key to assemble gear onto spindle allows for easier repairing of gear section
  • Can be connected to dust extraction system with optional dust-collecting wheel cover
  • Great for welders, fabricators, masons, stone/tile, automotive and many other metal applications. Double insulated.

DTL302

Cordless Angle Impact Wrench

18V LXT Li-Ion Cordless Angle Impact Wrench

  • This model, having a high torque that can loosen even stuck bolts, has been developed targeted at work in tight spaces such as automobile and agricultural machinery maintenance.
  • Drive size: 9.5mm (3/8″) Square, C ring (without hole)
  • High torque is achieved by increasing hammer inertia, resulting in higher performance than competitors’ models.
  • LED job light; – An LED is positioned below the angle head to improve visibility when working in tight spaces – The brightness (3 stages) can be changed by pressing and holding the mode switch button
  • Excellent maneuverability; the center of gravity is moved closer to the switch to reduce the strain on the user’s arm
  • Slim diameter due to the use of a slide battery for an ergonomically designed handle
  • Slim tool head that makes it easy to use in tight spaces
  • Equipped with an automatic impact stop system in forward/reverse rotation mode, making it suitable for performing work in tight spaces.

DTL301

Cordless Angle Impact Wrench

18V LXT Li-Ion Cordless Angle Impact Wrench

  • This model, having a high torque that can loosen even stuck bolts, has been developed targeted at work in tight spaces such as automobile and agricultural machinery maintenance.
  • Drive size: 12.7mm (1/2″) Square, Pin detent.
  • High torque is achieved by increasing hammer inertia, resulting in higher performance than competitors’ models.
  • LED job light; – An LED is positioned below the angle head to improve visibility when working in tight spaces. – The brightness (3 stages) can be changed by pressing and holding the mode switch button.
  • Excellent maneuverability; the center of gravity is moved closer to the switch to reduce the strain on the user’s arm.
  • Slim diameter due to the use of a slide battery for an ergonomically designed handle.
  • Slim tool head that makes it easy to use in tight spaces.
  • Equipped with an automatic impact stop system in forward/reverse rotation mode, making it suitable for performing work in tight spaces.

DTL300

Cordless Angle Impact Wrench

18V LXT Li-Ion Cordless Angle Impact Wrench

  • This model, having a high torque that can loosen even stuck bolts, has been developed targeted at work in tight spaces such as automobile and agricultural machinery maintenance.
  • Drive size: 12.7mm (1/2″) Square, C ring (with hole)
  • High torque is achieved by increasing hammer inertia, resulting in higher performance than competitors’ models.
  • LED job light; – An LED is positioned below the angle head to improve visibility when working in tight spaces – The brightness (3 stages) can be changed by pressing and holding the mode switch button
  • Excellent maneuverability; the center of gravity is moved closer to the switch to reduce the strain on the user’s arm
  • Slim diameter due to the use of a slide battery for an ergonomically designed handle
  • Slim tool head that makes it easy to use in tight spaces
  • Equipped with an automatic impact stop system in forward/reverse rotation mode, making it suitable for performing work in tight spaces.

TD004G

Cordless Impact Driver

40Vmax XGT BL Cordless T-Mode 230 N·m (2,040 in.lbs.) Impact Driver
  • With a maximum fastening torque of 230 N·m, this tool delivers excellent fastening performance in heavy-duty tasks, such as tightening hex head or hexalobular (star-shaped) hole head course thread screws, which are less prone to cam-out.
  • 4-stage impact power selection and T-mode (for thin metal sheets only) to match the type of screw and material. • For tasks requiring attention to cam-out, such as with Phillips head screws, the impact force can be adjusted accordingly. • Equipped with the T-Mode to minimize screw stripping, which is likely to occur when a self-drilling screw is tightened into a thin metal sheet workpiece under light load.
  • One-touch bit installation for easy and quick bit changes
  • Twin LED lights with preglow and afterglow functions for better illumination
  • The brushless motor provides longer work hours per charge and extended tool life.
  • An ergonomically designed grip ensures comfortable handling.
  • High water-resistance compatible with XPT (eXtreme Protection Technology)
  • The variable speed trigger allows for speed adjustments based on the material or application.
  • Equipped with an electric brake and anti-restart function for safety operation
  • Reversing switch is conveniently located.
  • The hook allows for easy and convenient hanging of the tool.
  • The battery protection circuit protects against overloading, over-discharging and over-heating.

GD002G

Cordless Die Grinder

40Vmax XGT Li-Ion Cordless 8 mm (1/4″) Die Grinder
  • With a Makita XGT high output Li-ion battery and a BL motor, this model achieves both high work efficiency and high durability.
  • Equipped with a shaft lock, LED light, and other features for significantly improved usability compared with DGD800.
  • Ergonomically designed slim grip; easy-to-grip body achieved by reducing the size of the grip portion
  • Shaft Lock: Replace top-mounted tools using only the supplied collet nut wrench.
  • LEDs are placed in three positions along the circumference to improve visibility when working in tight spaces (Can be turned on/off by turning the dial)
  • Active Feedback sensing Technology (AFT): When the rotation speed suddenly drops due to jamming of the top-mounted tool, power to the tool body is cut off to reduce recoil during kickback.
  • The dial speed can be changed to select a rotation speed according to application: – High rotation speed: Deburring, grinding – Low rotation speed: Finish polishing, Removal of paint and rust

GD001G

Cordless Die Grinder

40Vmax XGT Li-Ion Cordless 8 mm (1/4″) Die Grinder
  • With a Makita XGT high output Li-ion battery and a BL motor, this model achieves both high work efficiency and high durability.
  • Equipped with a shaft lock, LED light, and other features for significantly improved usability compared with DGD800.
  • Slide switch with lock-on for operator convenience
  • Ergonomically designed slim grip; easy-to-grip body achieved by reducing the size of the grip portion
  • Shaft Lock: Replace top-mounted tools using only the supplied collet nut wrench.
  • LEDs are placed in three positions along the circumference to improve visibility when working in tight spaces (Can be turned on/off by turning the dial)
  • Active Feedback sensing Technology (AFT): When the rotation speed suddenly drops due to jamming of the top-mounted tool, power to the tool body is cut off to reduce recoil during kickback.
  • The dial speed can be changed to select a rotation speed according to application: – High rotation speed: Deburring, grinding – Low rotation speed: Finish polishing, Removal of paint and rust

DHR242

Cordless Combination Hammer

18V LXT BL Brushless Cordless 24 mm (15/16″) Combination Hammer, SDS-PLUS
  • Lightweight, 3-Mode Rotary Hammer
  • BL motor delivers 0-950 RPM and 0-4,700 BPM
  • BL motor with high power to weight and size ratio
  • BL motor generates less heat buildup and is ideal for prolonged use in high production applications
  • BL motor is electronically controlled to optimize battery energy use for longer run time per charge
  • BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
  • BL motor efficiently uses energy to match torque and RPM to the changing demands of the application
  • Ergonomically designed vibration absorbing handle and a large 2-finger trigger for operator comfort
  • 3-mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only” for multiple applications
  • One touch sliding chuck enables quick and easy bit changes
  • Torque limiting clutch engineered to minimize gear damage by automatically disengaging gears if the bit binds
  • Chisel rotates 360° with 40 different positions
  • Compact design at only 328 mm (12-7/8″) long and lightweight for reduced operator fatigue
  • Soft grip handle provides increased comfort on the job
  • Variable speed trigger allows operator to adjust speed based on materials or application
  • Constant speed control automatically applies additional power to the motor to maintain speed under load
  • 2.0 Joules (EPTA) impact energy delivers high performance
  • Water-resistance compatible with XPT
  • Depth gauge for increased drilling consistency. Conveniently located push button for rotation reverse. Electric brake for maximum productivity. Battery protection circuit protects against overloading, over-discharging and over-heating. Makita Li-Ion battery provides longer run time, 5x lower self-discharge (for use any time) and 16 firm-holding contact terminals (for constant high power)

UC030G

Cordless Chain Saw

40Vmax XGT BL Cordless 400/450/500mm (16/18/20″) Chain Saw
  • Overview: The UC030G is a cordless 400/450/500mm rear-handle chain saw powered by a 40Vmax XGT Li-Ion battery. In combination with the high-output battery BL4080H, this tool offers work efficiency equal or superior to that of 50cc-class engine chain saws, enabling smooth cutting of trees up to 400mm in diameter.
  • Fast acceleration in response to trigger operation enables smooth, continuous cutting tasks like limbing.
  • Selectable chain speeds (ECO/Medium/High) with variable speed control by trigger and a mode memory function
  • When excessive force is applied, the tool slows down, making it easy to adjust the load on the cutting edge.
  • Enhanced operability with intuitive icons, bright LEDs, and responsive buttons
  • IPX4M-rated for use in rainy conditions
  • A shorter distance between the handle and hand guard allows quick and easy brake release.
  • The air filter cover can be removed without tools, making cleaning easy and keeping debris out.
  • Improved operability with a redesigned lock-off lever and a 5-minute auto shut-off.
  • Highly visible felling line with black print offers clear guidance for the cutting direction.
  • If the tool locks due to load, it resumes operation instantly when the load is released without retriggering.
  • Equipped with both mechanical and electric brakes for user protection
  • The metal spike bumper firmly grips the workpiece, providing better control and easier cutting.
  • Ergonomic soft grip for non-skid operation
  • Adjustable automatic chain lubrication with a large oil reservoir
  • The chain oil view window allows the operator to easily check the oil level.
  • Captive nuts prevent nut loss during guide bar or saw chain replacement.