SC001G

Cordless Steel Rod Cutter

40Vmax XGT BL Cordless 16 mm (5/8″) Steel Rod Cutter

• SC001GZK
  • By adopting the 40Vmax XGT Li-Ion battery and a high-power BL motor, the cutting speed has increased by approx. 65% compared to our 18V LXT model.
  • The tool can cut a ø16mm rebar in approx. 1.7 seconds, improving on-site efficiency and reducing construction time.
  • Lightweight and compact—0.9 kg lighter and 39 mm shorter than our 18V LXT model for easy portability.
  • Anti-scattering protector prevents cut pieces from flying toward the operator.
  • 360° rotatable head for flexible positioning on-site.
  • Manual return valve allows cutter to be returned even in case of trouble.

KP0810

Power Planer

82 mm (3-1/4″) 850 W Power Planer

  • Powerful with less weight
  • Planes up to 82 mm (3-1/4″) wide and 4 mm (5/32″) deep in a single pass
  • Shiplapping cuts up to 25 mm (1″)
  • Two-blade cutter head with 16,000 RPM delivers smooth finish and fast stock removal
  • Chip ejection can be directed to either side of the tool for convenience
  • Depth adjust knob features an easy-to-read scale with click stops in 0.1mm increments for precise depth adjustment
  • Conveniently located lock-on/off button can be operated from either side of handle
  • Ergonomically designed rubberized grip and depth adjustment knob for comfort and control
  • Front base features 3 chamfering groove options: approximately 1.4 mm, 3 mm and 4 mm
  • Rigid die-cast aluminum housing supports planer drum for increased durability
  • Spring-loaded stand elevates the base to protect the blades and workpiece
  • Can be used with both standard planer blades and double-edged mini blades
  • Simple blade setting system for fast blade installation
  • Lightweight and excellent balance
  • Two-stage safety trigger switch minimizes accidental start up (For tool with Lock-off button)
  • Lock-on button for continuous use operation (For tool with Lock-on button)
  • Guide rule for accurate and maximum use of planing width
  • Connectable to vacuum cleaner
  • Double insulated

DTM53

Cordless Multi Tool

18V LXT Brushless Cordless Tool-less Multi Tool

• DTM53Z • DTM53ZX1 • DTM53RTJX1
  • Overview: The DTM53 is a cordless multi tool powered by an 18V LXT Li-Ion battery, and designed to be compatible with OIS accessories. This model offers high work efficiency by adopting a brushless motor and excellent maneuverability with a slimmer grip.
  • With a brushless motor and constant speed control, the tool delivers high efficiency even under load.
  • Small diameter barrel grip for improved handling and comfort
  • Tool-less clamp system for fast accessory installation
  • Compatible with accessories in the Oscillating Interface System (OIS), and STARLOCK accessories.
  • Water-resistance compatible with XPT * Except when the BLB182 battery is installed
  • An optional depth gauge allows the user to work at the intended cutting depth or height.
  • Anti-restart function minimizes accidental start-up
  • Variable speed control dial enables the user to match the speed to the application
  • Soft start feature for smooth start-up
  • 12 angle settings at every 30° from 0° to 360°
  • Dust extraction system is available as an option for aggressive dust removal in applications with the sanding pad
  • 3.2° Oscillation angle engineered for faster, more aggressive cutting and sanding
  • Easy-to-operate slide switch for continuous use and improved efficiency.
  • Compact design for easy handling in tight spaces.
  • Lightweight design minimizes fatigue during extended use.
  • Ideal for wood flooring, tile, plaster, drywall, PVC, and a variety of other applications.

HR012G

Cordless Combination Hammer

40Vmax XGT BL AFT AWS AVT Cordless 28 mm (1-1/8″) Combination Hammer, SDS-PLUS, Quick Change Chuck
  • Overview: The HR012G is a cordless 28mm (1-1/8″) SDS-plus combination hammer powered by a 40Vmax XGT Li-Ion battery. This tool delivers an impact energy of 3.3 J, a no-load speed of 0 to 1,130 rpm, and an impact rate of 0 to 5,000 bpm. It remains compact and lightweight even when the dust collection system is attached. Anti-Vibration Technology (AVT), including a counterweight mechanism, a vibration-absorbing handle structure, and an anti-vibration grip, reduces vibration transmitted to the hands, minimizing user strain during continuous operation.
  • Electronic switch enables speed and impact rate selection for enhanced usability
  • The dust collection system DX17 uses the tool’s motor and fan for dust collection, resulting in a lighter, more compact design without compromising performance.
  • Active Feedback sensing Technology (AFT) turns the motor off if bit rotation is suddenly forced to stop
  • High water-resistance compatible with XPT
  • Auto-start Wireless System (AWS) enables control via Bluetooth for on-demand dust extraction.
  • Quick-change chuck for SDS-plus can be easily exchanged for Quick-change drill chuck
  • Three operation modes: Rotation only, Hammering with rotation, and Hammering only
  • Torque limiter stops rotation if the bit jams for operator safety and enhanced motor protection
  • Constant speed control automatically maintains rotation speed even under load
  • The variable speed trigger allows for speed adjustments based on the material or application.
  • Twin-LED job light with preglow and afterglow functions for better illumination.

HR011G

Cordless Combination Hammer

40Vmax XGT BL AFT AWS AVT Cordless 28 mm (1-1/8″) Combination Hammer, SDS-PLUS
  • Overview: The HR011G is a cordless 28mm (1-1/8″) SDS-plus combination hammer powered by a 40Vmax XGT Li-Ion battery. This tool delivers an impact energy of 3.3 J, a no-load speed of 0 to 1,130 rpm, and an impact rate of 0 to 5,000 bpm. It remains compact and lightweight even when the dust collection system is attached. Anti-Vibration Technology (AVT), including a counterweight mechanism, a vibration-absorbing handle structure, and an anti-vibration grip, reduces vibration transmitted to the hands, minimizing user strain during continuous operation.
  • Electronic switch enables speed and impact rate selection for enhanced usability
  • The dust collection system DX17 uses the tool’s motor and fan for dust collection, resulting in a lighter, more compact design without compromising performance.
  • Active Feedback sensing Technology (AFT) turns the motor off if bit rotation is suddenly forced to stop
  • High water-resistance compatible with XPT
  • Auto-start Wireless System (AWS) enables control via Bluetooth for on-demand dust extraction.
  • Equipped with a standard chuck compatible with SDS-plus bits
  • Three operation modes: Rotation only, Hammering with rotation, and Hammering only
  • Torque limiter stops rotation if the bit jams for operator safety and enhanced motor protection
  • Constant speed control automatically maintains rotation speed even under load
  • The variable speed trigger allows for speed adjustments based on the material or application.
  • Twin-LED job light with preglow and afterglow functions for better illumination.

JR003G

Cordless Recipro Saw

40Vmax XGT BL Cordless Recipro Saw, Chain Vise
  • Overview: The JR003G is a cordless recipro saw equipped with a chain vise, powered by a 40Vmax XGT Li-Ion battery. The tool improves cutting accuracy by using the chain vise to securely fix the workpiece, and delivers both the power and durability required for cutting large-diameter pipes.
  • Delivers excellent cutting efficiency through the use of an XGT battery, a load-resistant BL motor, and enhanced stroke rate.
  • Enhanced structural rigidity around the crank mechanism delivers durability exceeding that of competing models by more than 50%.
  • Capable of cutting pipes with an outer diameter of up to 220 mm by securely clamping them with the chain vise
  • Built-in spring keeps the chain securely in place while wrapping and tightening around the pipe.
  • The tool can also be used as a standard recipro saw by attaching the front grip and optional blade clamp.
  • The blade clamp can be easily replaced simply by loosening the hex socket bolts without removing the shoe.
  • Adjustable stroke rate from 800 to 2,200 min⁻¹ with a dial improves cutting efficiency and extends blade life.
  • Constant speed control minimizes reduction in cutting speed under load
  • High water-resistance compatible with XPT (eXtreme Protection Technology)

DUP181

Cordless Pruning Shears

18V LXT Brushless Cordless Pruning Shears

  • Overview: The DUP181 is a pair of cordless pruning shears powered by an 18V LXT Li-Ion battery. Equipped with a brushless motor, this tool cuts branches up to 30 mm in diameter, weighs only 1.1 kg (with the BL1815N battery), provides a slim grip with a 125 mm circumference, offering smooth and effortless pruning.
  • The sensor built into the motor ensures smooth blade synchronization with the trigger and offers excellent trigger responsiveness even at low speeds for precise pruning.
  • Four adjustable opening angles to suit different branch sizes for enhanced efficiency.
  • The standby mode is convenient for temporarily storing the tool in a holster between tasks.
  • Lubricating oil can be applied from the outside without disassembly.
  • Cutting depth can be adjusted after blade replacement.
  • Lightweight design minimizes fatigue during extended use.
  • The brushless motor provides longer work hours per charge and extended tool life.
  • Water-resistance compatible with XPT.
  • Electric brake that stops the blade for user protection.
  • Battery protection circuit protects against overloading, over-discharging, and over-heating.

HP003G

Cordless Hammer Driver Drill

40Vmax XGT BL AFT Cordless 13 mm (1/2″) 180 N·m (1,590 in.lbs) Hammer Driver Drill

  • Feature a newly added medium-speed mode as one of its three-speed settings.
  • The added medium-speed mode delivers combination of the torque and speed ideal for demanding tasks, such as driving long screws, which require both high torque and speed.
  • Added medium-speed mode improves work efficiency in heavy-duty applications, where our current and the competitors’models can operate only in low-speed mode and with lower work efficiency.
  • In tightening of long screw, operating speed in the medium-mode is approx twice as high as that in low-speed mode.
  • Active Feedback sensing Technology (AFT) turns the motor off if bit rotation is suddenly forced to stop.
  • Electronical clutch; Enhanced torque and clutch stages in clutch mode, thanks to high-torque in high-speed mode and new 3-speed settings (41/30/25 settings in Low/Medium/High mode).
  • Jog dial for easy adjustment of fastening torque; with digital display for visual confirmation of selected torque.
  • Electric brake for maximum productivity and increased operator safety
  • Soft start (in Low-speed mode); Reduces kickback when starting with high-inertia bits such as ø220mm Multi siding core bit, etc.
  • LED job light with higher brightness and wider illumination area; – LED job light has been relocated from the switch portion to the bottom of the grip portion or improved illumination coverage. – In Light mode, the illumination time is extended, allowing for use as a jobsite light in dark environments.
  • All metal 13 mm self-ratcheting chuck for improved bit gripping strength and durability.
  • Keyless chuck for quick and easy bit installation and removal.
  • High water-resistance compatible with XPT.
  • Reversing switch is conveniently located.
  • Durable, reversible belt clip convenient for temporary tool hanging.

DF003G

Cordless Driver Drill

40Vmax XGT BL AFT Cordless 13 mm (1/2″) 180 N·m (1,590 in.lbs) Driver Drill
  • Feature a newly added medium-speed mode as one of its three-speed settings.
  • The added medium-speed mode delivers combination of the torque and speed ideal for demanding tasks, such as driving long screws, which require both high torque and speed.
  • Added medium-speed mode improves work efficiency in heavy-duty applications, where our current and the competitors’models can operate only in low-speed mode and with lower work efficiency.
  • In tightening of long screw, operating speed in the medium-mode is approx twice as high as that in low-speed mode.
  • Active Feedback sensing Technology (AFT) turns the motor off if bit rotation is suddenly forced to stop.
  • Electronical clutch; Enhanced torque and clutch stages in clutch mode, thanks to high-torque in high-speed mode and new 3-speed settings (41/30/25 settings in Low/Medium/High mode).
  • Jog dial for easy adjustment of fastening torque; with digital display for visual confirmation of selected torque.
  • Electric brake for maximum productivity and increased operator safety.
  • Soft start (in Low-speed mode); Reduces kickback when starting with high-inertia bits such as ø220mm Multi siding core bit, etc.
  • LED job light with higher brightness and wider illumination area; – LED job light has been relocated from the switch portion to the bottom of the grip portion or improved illumination coverage. – In Light mode, the illumination time is extended, allowing for use as a jobsite light in dark environments.
  • All metal 13 mm self-ratcheting chuck for improved bit gripping strength and durability.
  • Keyless chuck for quick and easy bit installation and removal.
  • High water-resistance compatible with XPT.
  • Reversing switch is conveniently located.
  • Durable, reversible belt clip convenient for temporary tool hanging.

BN002G

Cordless Framing Nailer

40Vmax XGT Li-Ion Brushless Cordless 90 mm (3-1/2″) Framing Nailer, Round-head
  • Developed from DBN901, but with an XGT Li-Ion battery and more powerful BL motor, this model features: Significantly improved rapid firing capability, which is superior to that of our competitors’ models Increased compression speed of pneumatic spring that allows for driving nails up to 90mm with a driving feel very close to that of pneumatic nailers
  • Operation mode Selectable from Full sequential actuation mode (for single nailing) / Contact actuation mode (for continuous nailing)
  • LED job light Single LED with preglow and afterglow functions
  • Driving depth is adjustable with the dial
  • Anti-slip nose Tip shape that resists slipping when driving nails at an angle
  • Window for checking remaining nail quantity The amount of remaining nails can be checked.
  • Anti-dry fire mechanism The anti-dry fire mechanism is activated before the number of remaining nails reaches zero, avoiding missed shots.
  • Hooks • Different hooks can be attached to the left and right sides for various work applications. • The rafter hook can be attached to the opposite side of the belt hook. The width of the hook portion is 2-1/2″, allowing for hooking on ladders, scaffolding, and 3x timbers.
  • Water-resistance compatible with XPT

BN001G

Cordless Framing Nailer

40Vmax XGT Li-Ion Brushless Cordless 90 mm (3-1/2″) Framing Nailer, Clipped-Head
  • Developed from DBN900, but with an XGT Li-Ion battery and more powerful BL motor, this model features: Significantly improved rapid firing capability, which is superior to that of our competitors’ models Increased compression speed of pneumatic spring that allows for driving nails up to 90mm with a driving feel very close to that of pneumatic nailers
  • Operation mode Selectable from Full sequential actuation mode (for single nailing) / Contact actuation mode (for continuous nailing)
  • LED job light Single LED with preglow and afterglow functions
  • Driving depth is adjustable with the dial
  • Anti-slip nose Tip shape that resists slipping when driving nails at an angle
  • Window for checking remaining nail quantity The amount of remaining nails can be checked.
  • Anti-dry fire mechanism The anti-dry fire mechanism is activated before the number of remaining nails reaches zero, avoiding missed shots.
  • Hooks • Different hooks can be attached to the left and right sides for various work applications. • The rafter hook can be attached to the opposite side of the belt hook. The width of the hook portion is 2-1/2″, allowing for hooking on ladders, scaffolding, and 3x timbers.
  • Water-resistance compatible with XPT

DTD201

Cordless Impact Driver

18V LXT BL Cordless 210 N·m (1,860 in.lbs.) Impact Driver, 4-Speed + T-Mode
  • Overview: The DTD201 is a cordless impact driver powered by an 18V LXT Li-Ion battery. This model delivers up to 210 N·m of fastening torque, enabling high-speed, high-power performance even in heavy-duty applications such as fastening hex coach screws and hardware screws.
  • Delivers up to 210 N·m of fastening torque and a high-speed rotation of 3,700 rpm
  • Four selectable speed settings make it easy to adjust the tool for a wide range of applications.
  • T-mode drives self-drilling screws into thin metal at high speed, then stops after the tool starts to impact to prevent over-tightening.
  • Twin LED job light provides bright illumination with preglow and afterglow functions for enhanced visibility.
  • The variable speed trigger allows for speed adjustments based on the material or application.
  • Anti-bit wobbling structure ensures enhanced stability during fastening.
  • Compact design measuring 121mm in length for easy access in tight spaces
  • Lightweight design minimizes fatigue during extended use.
  • The hook allows for easy and convenient hanging of the tool.
  • Ergonomic rubberized soft grip for increased comfort
  • One-touch bit installation ensures smoother installation and reduces the chance of the bit coming loose.
  • Water-resistance compatible with XPT
  • The brushless motor provides longer work hours per charge and extended tool life.
  • Electric brake quickly stops rotation for user protection.