DDF490

Cordless Driver Drill

18V LXT Brushless Cordless 13 mm (1/2″) 65 N·m (580 in.lbs) Driver Drill
  • Overview: The DDF490 is a cordless driver drill powered by an 18V LXT Li-Ion battery. Equipped with a powerful brushless motor, the tool delivers the maximum torque of 65 N·m. With its lightweight and compact design, the tool is easy to handle even in narrow spaces.
  • The brushless motor provides longer work hours per charge and extended tool life.
  • Provides increased efficiency with the maximum no-load speed of up to 1,900 rpm.
  • The 20-stage torque settings allow for fine adjustments to suit the task at hand.
  • A mechanical 2-speed gearing allows for choosing between maximum rpm or higher torque.
  • Two action modes are available: Drilling and Screwdriving
  • A single LED light with pre-glow and after-glow functions illuminate the work area.
  • The variable speed trigger allows for speed adjustments based on the material or application.
  • A convenient 13 mm (1/2″) keyless chuck for quick bit changes
  • The ergonomically designed grip ensures comfortable handling.
  • The reversing switch is conveniently located.
  • Water-resistance compatible with XPT
  • The hook allows for easy and convenient hanging of the tool.
  • The battery protection circuit protects against overloading, over-discharging and over-heating.

DHP490

Cordless Hammer Driver Drill

  • 18V LXT Brushless Cordless 13 mm (1/2″) 65 N·m (580 in.lbs) Hammer Driver Drill
  • Overview: The DHP490 is a cordless hammer driver drill powered by an 18V LXT Li-Ion battery. Equipped with a powerful brushless motor, the tool delivers the maximum torque of 65 N·m. With its lightweight and compact design, the tool is easy to handle even in narrow spaces.
  • The brushless motor provides longer work hours per charge and extended tool life.
  • Provides increased efficiency with the maximum no-load speed of up to 1,900 rpm.
  • The 20-stage torque settings allow for fine adjustments to suit the task at hand.
  • A mechanical 2-speed gearing allows for choosing between maximum rpm or higher torque.
  • Three action modes are available: Drilling, Hammer drilling, and Screwdriving
  • A single LED light with pre-glow and after-glow functions illuminate the work area.
  • The variable speed trigger allows for speed adjustments based on the material or application.
  • A convenient 13 mm (1/2″) keyless chuck for quick bit changes
  • The ergonomically designed grip ensures comfortable handling.
  • The reversing switch is conveniently located.
  • Water-resistance compatible with XPT
  • The hook allows for easy and convenient hanging of the tool.
  • The battery protection circuit protects against overloading, over-discharging and over-heating.

VC014GL

Cordless Vacuum Cleaner

40Vmax XGT Brushless Cordless 7.5 L Dust Class L HEPA Portable Vacuum Cleaner (Wet & Dry)

  • Overview: The VC014GL is a cordless vacuum cleaner powered by a 40Vmax XGT Li-Ion battery. Equipped with a BL motor, the cleaner delivers outstanding suction power in its class, while maintaining low noise levels and a compact design.
  • Maximum suction power of 165 W (with a ø28mm x 2m flexible hose attached)
  • Provides a runtime of up to 120 minutes with a BL4050F battery.
  • Variable suction power control to suit different tasks and applications
  • A dust collection bag can be attached inside the tank to suppress the spread of dust and particles during dust disposal. • Paper filter bag for general cleaning, such as vacuuming dust and hair • Filter bag (optional accessory) made of non-woven fabric for vacuuming concrete dust, wood chips, and other debris generated during the use of power tools
  • The HEPA filter effectively captures very fine particles.
  • The brushless motor provides longer working hours per charge and extended machine life.
  • Compatible with both wet and dry dust types
  • Two tools in one: quickly converts from vacuum to blower for enhanced versatility.
  • A flexible hose supplied with a diameter of 28 mm and a length ranging from 0.4 m to 2 m.
  • The automatic filter cleaning mechanism is designed to maintain optimal suction efficiency and extend filter life. * When Damper and Prefilter are attached.
  • The battery fuel gauge allows for checking the remaining battery without opening the battery cover.
  • The tank capacity of 7.5 L for dry dust and 4.5 L for wet debris
  • High water-resistance compatible with XPT (eXtreme Protection Technology)
  • The cleaner complies with EU standards for dust class L (light) and is capable of picking up dust in this class.
  • Other features: • Shoulder strap for enhanced mobility • Equipped with a sash nozzle and a wide nozzle • On-board hose and nozzle storage allows for easy and convenient transport • Equipped with a wet filter (country-specific) for vacuuming liquid • An optional polyethylene bag can be attached to the tank for easy disposal. • Foldable handle

VC013GL

Cordless Vacuum Cleaner

40Vmax XGT Brushless AWS Cordless 7.5 L Dust Class L HEPA Portable Vacuum Cleaner (Wet & Dry)

  • Overview: The VC013GL is a cordless vacuum cleaner powered by a 40Vmax XGT Li-Ion battery. Equipped with a BL motor, the cleaner delivers outstanding suction power in its class, while maintaining low noise levels and a compact design. Compatibility with the Auto-start Wireless System (AWS) allows the user to automatically run the cleaner in sync with the tool’s switch operation.
  • Maximum suction power of 165 W (with a ø28mm x 2m flexible hose attached)
  • Provides a runtime of up to 120 minutes with a BL4050F battery.
  • Variable suction power control to suit different tasks and applications
  • A dust collection bag can be attached inside the tank to suppress the spread of dust and particles during dust disposal. • Filter bag made of non-woven fabric for vacuuming concrete dust, wood chips, and other debris generated during the use of power tools • Paper filter bag for general cleaning, such as vacuuming dust and hair
  • The HEPA filter effectively captures very fine particles.
  • The brushless motor provides longer working hours per charge and extended machine life.
  • Compatible with both wet and dry dust types
  • Two tools in one: quickly converts from vacuum to blower for enhanced versatility.
  • A flexible hose supplied with a diameter of 28 mm and a length ranging from 0.4 m to 2 m.
  • The automatic filter cleaning mechanism is designed to maintain optimal suction efficiency and extend filter life. * When Damper and Prefilter are attached.
  • The battery fuel gauge allows for checking the remaining battery without opening the battery cover.
  • The tank capacity of 7.5 L for dry dust and 4.5 L for wet debris
  • High water-resistance compatible with XPT (eXtreme Protection Technology)
  • The cleaner complies with EU standards for dust class L (light) and is capable of picking up dust in this class.
  • Other features: • Shoulder strap for enhanced mobility • Equipped with a sash nozzle and a wide nozzle • On-board hose and nozzle storage allows for easy and convenient transport • Equipped with a wet filter (country-specific) for vacuuming liquid • An optional polyethylene bag can be attached to the tank for easy disposal. • Foldable handle

DTW1005

Cordless Impact Wrench

18V LXT BL Cordless 3/4″ (19 mm) 1,360 N·m (1,000 ft.lbs.) Impact Wrench, Forward/Reverse Rotation Auto Stop Mode
  • Overview: The DTW1005 is a cordless impact wrench with a 137mm (5-3/8″) long anvil with a 19mm (3/4″) square drive, powered by an 18V LXT Li-Ion battery. With high power and the long anvil, it is suitable for loosening and tightening bolts and nuts in recessed areas such as the rear wheels of trucks. Four modes are available for forward rotation, with Modes 1, 2, and 3 featuring an auto-stop system to enhance bolt/nut tightening efficiency, making it suitable for tire removal and installation.
  • Delivers maximum fastening torque of 1,360N·m (1,000ft·lbs) and nut-busting torque of 1,700N·m (1,250ft·lbs)
  • Mode settings suitable for tire removal and installation Four modes are available for forward rotation • Mode 1: Stops immediately after seating (30 – 50N·m), which is equivalent to manual tightening of large truck tires • Mode 2: Stops approx. 0.3 seconds after seating (50 – 150N·m), which is equivalent to initial tightening of large truck tires • Mode 3: Stops approx. 0.5 seconds after seating (300 – 450N·m), which is equivalent to temporary tightening of large truck tires • Mode 4: Tightens at the maximum speed Two modes are available for reverse rotation • Mode 1-3 are on: Rotates slowly after finishing impacts • Mode 4: Loosens at the maximum speed
  • Twin LED job light illuminates bolts and nuts
  • The full-speed mode function reduces the trigger pull to reach the full speed, reducing hand and finger fatigue from trigger pull.
  • Ergonomically designed handle with rubberized soft grip provides increased comfort
  • Ensures stable torque until the end of the battery capacity with constant speed control
  • Water-resistance compatible with XPT

TW011G

Cordless Impact Wrench

  • 40Vmax XGT BL Cordless 3/4″ (19 mm) 1,500 N·m (1,110 ft.lbs.) Impact Wrench, Forward/Reverse Rotation Auto Stop Mode
  • Overview: The TW011G is a cordless impact wrench with a 138mm (5-7/16″) long anvil with a 19mm (3/4″) square drive, powered by a 40Vmax XGT Li-Ion battery. With high power and the long anvil, it is suitable for loosening and tightening bolts and nuts in recessed areas such as the rear wheels of trucks. Four modes are available for forward rotation, with Modes 1, 2, and 3 featuring an auto-stop system to enhance bolt/nut tightening efficiency, making it suitable for tire removal and installation.
  • Delivers maximum fastening torque of 1,500N·m (1,110ft·lbs) and nut-busting torque of 1,900N·m (1,400ft·lbs)
  • Mode settings suitable for tire removal and installation Four modes are available for forward rotation • Mode 1: Stops immediately after seating (30 – 50N·m), which is equivalent to manual tightening of large truck tires • Mode 2: Stops approx. 0.3 seconds after seating (50 – 150N·m), which is equivalent to initial tightening of large truck tires • Mode 3: Stops approx. 0.5 seconds after seating (300 – 450N·m), which is equivalent to temporary tightening of large truck tires • Mode 4: Tightens at the maximum speed Two modes are available for reverse rotation • Mode 1-3 are on: Rotates slowly after finishing impacts • Mode 4: Loosens at the maximum speed
  • Twin LED job lights at two locations (above the switch trigger and above the battery) illuminate bolts and nuts
  • The full-speed mode function reduces the trigger pull to reach the full speed, reducing hand and finger fatigue from trigger pull.
  • Ergonomically designed handle with rubberized soft grip provides increased comfort
  • Ensures stable torque until the end of the battery capacity with constant speed control
  • High water-resistance compatible with XPT (eXtreme Protection Technology)

DBN601

Cordless Finish Nailer

18V LXT Cordless 16 Ga 64 mm (2-1/2″) Finish Nailer

  • Overview: The DBN601 is a 64 mm (2-1/2″) cordless finish nailer compatible with 16 gauge finish nails (straight-type), powered by an 18V LXT Li-Ion battery. Featuring a pneumatic spring mechanism, the recoil when driving nails is lighter and it offers a feel similar to pneumatic nailers, making it suitable for interior work and other nailing tasks. It is reliably able to drive 16 gauge finish nails up to 64 mm into hard woods such as red oak, while maintaining sufficient work capacity. Without the hassle of a compressor and hose, the lightweight design offers better maneuverability and zero ramp-up time. It is designed to ensure the center of gravity remains optimal regardless of which compatible battery is attached, making it easy to aim and reducing arm strain and fatigue.
  • Rapid firing capability of 3.3 shots per second
  • Drives a range of 16 gauge finish nails from 19 mm (3/4″) to 64 mm (2-1/2″); magazine capacity up to 110 nails
  • 2-mode selector switch for sequential or bump fire mode
  • Slim nose with an easy-to-aim ejection section for better visibility when driving nails
  • Anti-dry fire mechanism avoids dry firing by locking the contact arm when the remaining nails are between 6 and 9.
  • Easy to use toolless depth adjustment dial for a wide variety of finish applications
  • Built-in LED light illuminates the work area
  • Ergonomically designed handle with soft grip provides increased comfort
  • Nails can be removed without tools in case of jamming
  • Nail view window enables fast identification of remaining nail capacity
  • Water-resistance compatible with XPT
  • The belt hook is convenient for temporarily hanging the tool.
  • The rubber bumpers protect workpieces from scratches or damage.

DBN610

Cordless Finish Nailer

18V LXT Cordless 16 Ga 64 mm (2-1/2″) Finish Nailer

  • Overview: The DBN610 is a 64 mm (2-1/2″) cordless finish nailer compatible with 16 gauge finish nails (angled-type), powered by an 18V LXT Li-Ion battery. Featuring a pneumatic spring mechanism, the recoil when driving nails is lighter and it offers a feel similar to pneumatic nailers, making it suitable for interior work and other nailing tasks. It is reliably able to drive 16 gauge finish nails up to 64 mm into hard woods such as red oak, while maintaining sufficient work capacity. Without the hassle of a compressor and hose, the lightweight design offers better maneuverability and zero ramp-up time. It is designed to ensure the center of gravity remains optimal regardless of which compatible battery is attached, making it easy to aim and reducing arm strain and fatigue.
  • Rapid firing capability of 3.3 shots per second
  • Drives a range of 16 gauge finish nails from 19 mm (3/4″) to 64 mm (2-1/2″); magazine capacity up to 110 nails
  • 2-mode selector switch for sequential or bump fire mode
  • Slim nose with an easy-to-aim ejection section for better visibility when driving nails
  • Anti-dry fire mechanism avoids dry firing by locking the contact arm when the remaining nails are between 6 and 9.
  • Easy to use toolless depth adjustment dial for a wide variety of finish applications
  • Built-in LED light illuminates the work area
  • Ergonomically designed handle with soft grip provides increased comfort
  • Nails can be removed without tools in case of jamming
  • Nail view window enables fast identification of remaining nail capacity
  • Water-resistance compatible with XPT
  • The belt hook is convenient for temporarily hanging the tool.
  • The rubber bumpers protect workpieces from scratches or damage.

DLM466

Cordless Lawn Mower

18V X2 (36V) LXT BL Cordless 46 cm (18″) Lawn Mower
  • Overview: The DLM466 is a 460 mm (18″) cordless lawn mower powered by two 18V LXT Li-Ion batteries in series. With its robust steel deck, the mower is highly durable, and its BL motor and 460 mm blade deliver sure cutting, making it suitable for medium-sized gardens. The mower can mow up to 900 m² with two 18V LXT batteries (BL1860B), and up to 1,920 m² with two high-capacity 18V LXT batteries (BL18120). The quiet mode (Noise reduction mode) allows for mowing with low noise, making it suitable for use in noise sensitive areas such as residential areas. The blade is slightly tilted toward the front, minimizing double-cutting and reducing the load for more comfortable operation.
  • The supplied two-tooth blade is compatible with both cutting and mulching operations. With the mulching blade (sold separately), the mower can finely chop the grass into smaller pieces.
  • The cutting height can be adjusted in 10 stages from 20 mm (13/16″) to 75 mm (2-15/16″) with one easy movement.
  • The inside of the cutting deck is washable with water for easy maintenance. * High-pressure water is not allowable.
  • A single red LED is located on the rear of the battery cover. It blinks when the battery capacity is low and lights up when the battery capacity runs out.
  • The handle can be easily folded in half by loosening thumb screws without tools.
  • The handle height can be adjusted in three stages by loosening thumb screws without tools.
  • Ergonomic soft grip for comfortable operation
  • Electric brake that stops the blade for user protection
  • Water-resistance compatible with XPT
  • 3 in 1 (Lawnmowing / Grass collecting / Mulching)

KP312S

Planer

312 mm (12-1/4″) 2,200 W Planer

  • 312 mm (12-1/4″) 2,200 W Planer
  • Planes up to 312mm (12-1/4″) wide stock at a single pass
  • Soft start
  • Double insulated

GD0602

Die Grinder

6 mm (1/4″) 400 W Die Grinder

  • Compact body with short nose ideal for precision grinding
  • Anti-slip rubber cover for easy handling
  • Round-shaped collet nut reduces the possibility of damages/ scratches to workpiece
  • Switch lever conveniently located for one hand operation
  • Side switch for operator convenience
  • Directional air-flow vents channel the tool’s air output away from the user’s face
  • Powerful 400W motor delivers 25,000 RPM to handle the most challenging applications
  • Lower noise at 73dB(A)
  • Round-shaped collet nut is engineered to minimize damages/scratches to workpiece
  • Zig-zag varnish protects the armature coil from dust and debris for longer motor life
  • Double insulated

DTC303

Cordless Crimper

18V LXT Cordless Crimper

  • With a maximum crimping capacity of ø17.5 mm (240 mm²), this tool is capable of crimping terminals onto large-diameter electric wires. This tool is able to perform crimping operations without dies.
  • Crimping capacity • Cu: ø17.5 mm (240 mm²) • Al: ø17.5 mm (240 mm²)
  • Auto retract function • The ram automatically retracts to its original position after completing the crimping operation, enhancing work efficiency. • The On/Off setting of the auto retract function can be switched.
  • Single LED job light with afterglow function
  • Trigger-lock function to minimize accidental pulling of the switch trigger
  • Straps on the tool for attaching the optional shoulder strap
  • Soft grip provides increased comfort during use
  • The tool head is capable of rotating 360 degrees