Cordless Pole Hedge Trimmer
40Vmax XGT BL Brushless Cordless 60 cm (23-5/8″) Pole Hedge Trimmer
- 40Vmax XGT BL Brushless Cordless 60 cm (23-5/8″) Pole Hedge Trimmer
- Model UN001G is a cordless pole hedge trimmer powered by a 40Vmax XGT Li-Ion battery
• This model is capable of cutting thick branches with high power, comparable to engine models
• It is also the lightest in its class, offering excellent usability
• It is equipped with a grease nipple for easy maintenance
- Designed to be lightweight and capable of cutting thick branches
• This model is capable of cutting thick branches due to an increased power obtained by the 40Vmax XGT li-ion battery and thick blades
• Higher operator’s convenience has been achieved by drastically reducing the weight of the tool compared to competing engine models
- Three-facet obliquely ground blade
The same blades as those of UH006G (Double-sided rough-cut type)
- High water-resistance compatible with XPT / IPX4
- New lock-off mechanism
By adding a lock lever to the lock-off lever, we have revised the automatic power-off time, enhancing work efficiency in the regions required to comply with the safety standard for the lock-off lever
- Improved durability of Angle adjustment section
The structures have been redesigned to reduce sliding wear of Head section angle adjustment mechanism, thereby reducing the occurrence of backlash
- Lubrication is possible with a grease gun
• Maintenance efficiency has been improved by adding a grease nipple and allowing oil to be supplied with a grease gun without removing the bolt on the oil supply port
• An oil supply port similar to that of DUN500W is also located on the bottom of Gear case and users who do not own a grease gun can remove the bolt and supply grease with a grease tube as with our current models
- Optimal balance of Head section
Head section is positioned on the extended line of the pole to provide an optimal balance, reducing forearm fatigue
- Reverse rotation system frees the blades when it is jammed by thick branches
- 3-speed design for optimum speed control
- Angle adjustable hedge trimmer head; 45° tilt-up to 70° tilt-down from the horizontal position
- Constant speed control maintains constant speed under load
- Can be folded in the 180° position for easy transport and storage
- Equipped with two grips
- Equipped with Electric brake
Compound Miter Saw
255 mm (10″) 1,500 W Compound Miter Saw
- 255 mm (10″) 1,500 W Compound Miter Saw
- High performance and durability at less expense
- Cuts up to 130mm (5-1/8”) at 90° and 90mm (3-9/16”) at 45°
- Miters 0°- 45° left and right, with positive stops at 0°, 15°, 22.5°, 31.6° and 45° (left and right)
- Powerful 1,500W motor delivers 4,200 RPM
- Compact and lightweight 14.7kg (32.5 lbs) for job site portability
- Dust bag for a cleaner work environment
- Connects to Makita vacuum cleaner for a cleaner work area
- Electric brake for maximum productivity and increased operator safety
- See-through blade guard system for greater visibility of the line of cut
- Includes holders (extension wings) for supporting long work pieces
- Added tip-resistance with a stay plate on the rear of the base
- No lock button or similar for locking the switch on is provided on the tool, but a hole is provided for insertion of a padlock to lock the tool off
- Externally accessible brushes for easy serviceability
- Double insulated
Drill
13 mm (1/2″) 630 W Variable Speed Reversing Drill with Keyed Chuck
- 13 mm (1/2″) 630 W Variable Speed Reversing Drill with Keyed Chuck
- This model is 13mm (1/2″) Drill mainly targeting metal drilling operations. We have refined the specifications of the motor of 6412 and achieved the performance equal or superior to competitors’ models.
- Continuous rating input: 630W
We have achieved the performance equal or superior to competitors’ models in heavy-duty applications such as drilling into metal, by adopting an enhanced motor with the same diameter and longer length and increasing the continuous rating input compared with 6412/6407 series.
- Longer carbon brush life
Longer carbon brush life compared with 6412/6413 has been achieved by adopting Brush holder unit.
- Increased durability against wobbling spindle
The durability of the bearing section has been increased during drilling (such as drilling into metal) where the spindle tends to wobble, by adopting a metal bearing bracket.
- Keyed drill chuck
- Variable speed (0 – 3,000 RPM) for drilling in a wide variety of materials
- Forward/Reverse switch for easy switching between operating modes
- Ergonomically designed grip provides more control and comfort
- Chuck capacity: 1.5 – 13 mm (1/16 – 1/2″)
- Lock-on Button for continuous operation
- Double insulated
Cordless Power Cutter
40Vmax XGT BL AFT Cordless 305 mm (12″) Power Cutter, Electric Brake
- 40Vmax XGT BL AFT Cordless 305 mm (12″) Power Cutter, Electric Brake
- Model CE004G, with a blade diameter of 305mm, offers a significant weight reduction compared to engine models, making it remarkably lightweight.
- Lightweight design
Targeting users requiring both ease of maneuverability and deep cutting depth, outstanding light weight and cutting depth have been achieved compared to 305mm class engine models, by using the same tool body as CE003G while adopting the blade diameter of 305mm.
- Overload indicator lamp
It alerts operator of overload with a red blinking LED and reduces unnecessary battery recharging by overload protection.
- Lock-off button minimizes accidental start up.
- LED job light enables operation in the dark sites where electricity is not supplied. It can be turned on/off by pushing the button conveniently located on the top of the tool.
- Electric brake
The tool has an electric brake that engine power cutters do not have.
- Water supply kit can be connected
By supplying water to the blade, the generation of dust during cutting is minimized.
- Active Feedback sensing Technology (AFT) turns the motor off if rotation speed suddenly slows or wheel is forced to stop.
- High water-resistance compatible with XPT
- Rotatable guard
The position of Guard can be adjusted according to working postures.
- Constant speed control
- Anti-restart function
Cordless Power Cutter
40Vmax XGT BL AFT Cordless 230 mm (9″) Power Cutter, Electric Brake
- 40Vmax XGT BL AFT Cordless 230 mm (9″) Power Cutter, Electric Brake
- Model CE003G, with a blade diameter of 230mm, provides high efficiency thanks to the 40Vmax XGT Li-Ion batteries.
- High efficiency equal or superior to our current models or competitors’ models has been achieved with any one of the batteries BL4040F/BL4050F/BL4080F.
- Overload indicator lamp
It alerts operator of overload with a red blinking LED and reduces unnecessary battery recharging by overload protection.
- Lock-off button minimizes accidental start up.
- LED job light enables operation in the dark sites where electricity is not supplied. It can be turned on/off by pushing the button conveniently located on the top of the tool.
- Electric brake
The tool has an electric brake that engine power cutters do not have.
- Water supply kit can be connected
By supplying water to the blade, the generation of dust during cutting is minimized.
- Active Feedback sensing Technology (AFT) turns the motor off if rotation speed suddenly slows or wheel is forced to stop.
- High water-resistance compatible with XPT
- Rotatable guard
The position of Guard can be adjusted according to working postures.
- Constant speed control
- Anti-restart function
Narrow Crown Stapler
18 GA 38 mm (1-1/2″) Narrow Crown Stapler, Air Duster
- Conveniently located push button type air duster for continuous operation
- Protective bumpers protect workpiece and body from scratches/damage
- High power of max air pressure 0.83 MPa (120 PSI) provides secure fastening of flooring point
- Toolless driving depth adjustment simply by turning a dial
- Large fastener capacity of 100 nails for fewer reloads and less downtime
- Ergonomically designed rubber grip with anti-slipping rib provides more comfort and better control
- Drives 18 GA staples with 5.7 mm crown from 13-38 mm (1/2″-1-1/2″) length
- Operable in either way of “bump fire mode (contact actuation mode)” or “(single) sequential actuation mode”
- Bump fire mode (contact actuation mode) drives staples repetitively for quick operation
- (Single) sequential actuation mode drives one staple by one sequential operation
- Clear window allows operator to see number of remaining staples
- Toolless nail jam clearing
- Easy-to-see slim nose tip allows quick and easy access to a desired fastening point
- Nose adapter for minimizing workpiece surface from being scratched or damaged
- Empty indicator turns to red when the remaining number of nails in the magazine becomes low
- Lightweight for reduced operator fatigue
- Hook convenient for temporary tool hanging
- Typical applications include: Fixing mouldings, cabinet work, panelling, carpet underlay, craft work
Cordless Hedge Trimmer
40Vmax XGT BL Brushless Cordless 60 cm (23-5/8″) Hedge Trimmer
- 40Vmax XGT BL Brushless Cordless 60 cm (23-5/8″) Hedge Trimmer
- The tool has been developed as an XGT hedge trimmer compact enough to handle easily when trimming small hedges, hedges with many curved surfaces, etc. It also provides smooth and efficient trimming thanks to the output power and number of strokes higher than those of the DUH506 series.
- Smooth and efficient trimming
• The output power and number of strokes have been increased compared with DUH606, achieving smooth and efficient trimming thanks to a 40Vmax XGT Li-Ion battery.
• Constant speed control suppresses rotation drop to enable stable trimming.
- XPT / IPX4-compatible
High water-resistance allows the user to operate the tool even if it is wet with water.
- Reverse function to clear jams
When the shear blades are jammed with branches, the shear blades are reversed for a moment to clear the jam by pressing the Reverse button and then pulling the trigger.
- The guide bar is made of aluminum, making the front of the tool lighter and reducing user fatigue.
- Anti-vibration structure by double-layered housing
- The switch lever is easy-to-press without deeply gripping the front handle, allowing for easy on/off control.
- Anti-restart function minimizes accidental start-up
- Equipped with Electric brake
- Equipped with Lock-off function
- Warning lamp for battery capacity and high temperature
Cordless Hedge Trimmer
40Vmax XGT BL Brushless Cordless 50 cm (19-3/4″) Hedge Trimmer
- 40Vmax XGT BL Brushless Cordless 50 cm (19-3/4″) Hedge Trimmer
- The tool has been developed as an XGT hedge trimmer compact enough to handle easily when trimming small hedges, hedges with many curved surfaces, etc. It also provides smooth and efficient trimming thanks to the output power and number of strokes higher than those of the DUH506 series.
- Smooth and efficient trimming
• The output power and number of strokes have been increased compared with DUH506, achieving smooth and efficient trimming thanks to a 40Vmax XGT Li-Ion battery.
• Constant speed control suppresses rotation drop to enable stable trimming.
- XPT / IPX4-compatible
High water-resistance allows the user to operate the tool even if it is wet with water.
- Reverse function to clear jams
When the shear blades are jammed with branches, the shear blades are reversed for a moment to clear the jam by pressing the Reverse button and then pulling the trigger.
- The guide bar is made of aluminum, making the front of the tool lighter and reducing user fatigue.
- Anti-vibration structure by double-layered housing
- The switch lever is easy-to-press without deeply gripping the front handle, allowing for easy on/off control.
- Anti-restart function minimizes accidental start-up
- Equipped with Electric brake
- Equipped with Lock-off function
- Warning lamp for battery capacity and high temperature
Cordless Pin Nailer
18V LXT Li-Ion Cordless 23 GA 35 mm (1-3/8″) Pin Nailer
- 18V LXT Li-Ion Cordless 23 GA 35 mm (1-3/8″) Pin Nailer
- Low Reaction Force Mechanism Enables Easier Long Pin Nailing and High-Quality Finish
- Easy-to-see slim nose tip allows quick and easy access to a desired fastening point
- Nails can be fired in the groove of baseboard
- Shoots 6,400 nails on a single full BL1860B charge
- Contact arm mechanism enables “continuous nailing” and “drag nailing”
- Contact trigger for improved accuracy and precision
- Drives 5 different lengths of 23 gauge pin nails (15 mm (5/8″), 18 mm (11/16″), 25 mm (1″), 30 mm (1-3/16″) and 35 mm (1-3/8″)); magazine capacity up to 120 nails
- Anti-dry fire mechanism engineered to minimize driving blanks and damage to work surface
- Toolless depth adjustment for precise flush and countersink finish
- Built-in LED light illuminates the work area
- Ergonomically designed handle with soft grip provides increased comfort
- Spring-loaded driving mechanism allows for a compact tool with light weight
- Battery fuel gauge indicates battery charge level
- Nose adapter for driving pin nails on delicate surfaces
- Trigger-lock button minimizes accidental start up
- Sight window for checking the amount of remaining pin nails
- Onboard hex wrench for keeping it from lost
- Battery protection circuit protects against overloading, over-discharging and over-heating
- Durable, reversible belt clip convenient for temporary tool hanging.
Cordless for increased convenience; eliminates the need for a compressor and air hose.
Cordless Trimmer
18V LXT BL Brushless Cordless 6 / – mm (- / 1/4″) Trimmer
- 18V LXT BL Brushless Cordless 6 / – mm (- / 1/4″) Trimmer
- BL motor provides output efficiency similar or superior to that of the corded models 3709/3711
- The same simple specifications as models 3709/3711, improving cost competitiveness and targeting the market in emerging countries
- Equipped with Lock/unlock button (for off/on of Standby mode), which minimizes the chance of unexpected start-up of the tool, and Power switch as with DRT50
- LED lamp for indication of being unlocked (= in standby mode)
The LED lamp lights up solid to indicate that the tool is unlocked and now in Standby mode while the tool is unlocked
- Soft start function minimizes start-up shock and makes the tool start smoothly
- Compatible with XPT (eXtreme Protection Technology)
- Material of Housing: Plastic
- Material of Base: Plastic
- Collet size: 6mm, 1/4″
Cordless Router
40Vmax XGT BL AWS Cordless 12 / – mm (- / 1/2″) 1,900 W Variable Speed Plunge Router with Electric Brake, Soft Start, Twin LEDs
- Excellent maneuverability has been achieved by keeping the weight and overall height of the tool low, while maintaining the work efficiency similar to that of corded model RP2301FC.
- High power and Compatibility with 12mm Collet chuck
• By using a 40Vmax XGT Li-Ion battery, a BL68-20 motor, and increasing cooling efficiency, we have achieved work efficiency similar to that of our corded model RP2301FC.
• High power and constant speed control reduce the chance of a drop in cutting speed even when using a ø12mm straight bit, reducing the roughness of the cutting surface.
- Plunge capacity: 60mm / Lightweight design / Low overall height
• We use a BL68-20 motor in this tool, which reduces its weight and height compared to corded models.
• Despite its compact size, it maintains a plunge capacity of 60mm. This allows all the bits listed in the ACCESSORY CATALOGUE to be compatible with the tool.
• As a result, it provides higher maneuverability in various work postures, such as sideways, and so on.
- Soft brake
A gentle stop of the bit ensures the work material remains undamaged from the recoil of the stop.
- Compatible with various existing accessories
This router can be used with a wide range of existing accessories, such as Templet guide, Guide rail adapter, etc.
- Simpler switch operation for more user convenience
The conventional two-function button has been separated into Lock-off button and Lock-on button for easier user operation.
- LED job light
A press of the Lock-off button turns the tool on in the standby mode and with the LED job light on for better view of the cutting position.
- Auto-start Wireless System (AWS) connects to compatible vacuum cleaners
- High water-resistance compatible with XPT
- Conveniently located variable speed control dial enables user to match the speed to the application while holding the tool body.
- Twin LED job lights illuminate cutting edge and increase visibility
- Constant speed control maintains constant speed under load
- Soft start function minimizes start-up shock and makes the tool start smoothly
- Lock-on function reduces hand fatigue in long continuous operation
- Connectable to Makita vacuum cleaners with the dust nozzle for a cleaner work environment
- Anti-restart function minimizes accidental start-up
Angle Grinder
230 mm (9″) 2,200 W Angle Grinder, Large Trigger Switch
- 230 mm (9″) 2,200 W Angle Grinder, Large Trigger Switch
- This model, targeting metal grinding operations, has achieved similar durability as GA9020, while improving cost competitiveness and realizing a lightweight and compact design
- Cost-competitiveness / Compact and lightweight
This model is a lightweight and compact 2,200W angle grinder with an N94 motor and has achieved weight reduction in the gear housing, etc.
- Excellent maneuverability
The side grip can be attached closer to the center of the wheel rotation to reduce the load on the user’s hand for improved maneuverability in grinding operation
- Reduced core abrasion
(Stator) core abrasion is reduced by adding a water absorption process to the nylon motor housing after molding to reduce dimensional changes of the housing in humid conditions
- Improved leakage resistance
Switch cover and Sponge are added to improve leakage current resistance between switch terminals
- Serial number label protection
The serial number label is placed in a position hidden by the wheel cover to protect the label
- Three-position adjustable side grip for operator convenience
- Double insulation
