Rechargeable Green Multi Line Laser
12V max CXT Li-Ion Rechargeable Green Multi Line Laser
- Three full 360-degree lines can be projected
- Full 360-degree line is created by letting the laser from a light source reflect on a cone mirror
- High brightness green laser for increased visibility in outdoor or bright job sites
- 4 Horizontal lines & 4 Vertical lines
- High accuracy +/-2 mm @ 10 m
- Indication method: Automatic vertical line indication by gimbal mechanism*¹
- Control method: Magnet damper method control
- eXtreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions (Dust and water resistance with IP54 rating for increased durability)
- Compatible wit CXT batteries
- Even high power-consuming green laser lines can keep being projected over a long continuous operation
Cordless Impact Driver
18V LXT BL Brushless Cordless Wood/Bolt/T-Mode 180 N·m Impact Driver
- Tool head slimmer than DTD171 enables easy screwdriving in tight corners or confined spaces
- Slimmer tool body due to smaller controller circuit
- Light mode enables to use DTD172 as a handy light on dark job sites
- Anti-bit wobbling structure; Two ball bearings are used to securely hold the anvil for reduced bit wobbling
- One-touch bit installation; Reduced resistance allows for easier bit installation; Designed to hold the bit more securely
- Twin LED lights on both sides illuminate the work area for increased visibility
- Wood/Bolt/T-Mode (1, 2)/Max/Hard/Medium/Soft Mode for Multiple Applications
- Redesigned mode selection switch for one-handed mode selection
- Rigid anvil retention for reduced bit wobbling
- Power selection switch provides the user with precise fastening control for a wide range of applications
- BL motor delivers 3,600 max RPM and 180 N·m of max torque
- BL motor is electronically controlled to optimize battery energy use for longer run time per charge
- BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- BL motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Lightweight for reduced operator fatigue
- Convenient one-touch 6.35 mm (1/4″) hex chuck for quick bit changes (for some countries only)
- Soft grip provides increased comfort on the job
Cordless Angle Grinder
40Vmax XGT BL AFT Cordless 125 mm (5″) Angle Grinder, Anti-Restart Function, Electric Brake, Paddle Switch, X-LOCK
- X-LOCK for toolless accessory changes
- X-LOCK mechanism enables to install/remove X-LOCK wheels with just a single action without tool; minimizes down-time between wheel changes; minimizes over-tightening and loosening of wheels
- X-LOCK wheel can be easily removed simply by pulling up the lever
- New toolless wheel cover allows for fast and easy angle adjustment and installation/removal of wheel cover
- Outperforming performance and efficiency
- Genuine solution for high demand industrial applications
- Excellent in continuous heavy-duty work
- Active Feedback sensing Technology (AFT) turns the motor off if rotation speed suddenly slows or wheel is forced to stop
- Electric brake for maximum productivity
- BL motor delivers 8,500 RPM
- BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- BL motor is electronically controlled to optimize battery energy use for longer run time per charge
- BL motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Soft grip provides increased comfort on the job
- Paddle switch; Easy-to-hold slim grip achieved by optimized parts allocation; Grip circumference smaller than DGA408 series
Cordless Angle Grinder
40Vmax XGT BL AFT Cordless 100 mm (4″) Angle Grinder, Anti-Restart Function, Electric Brake, Paddle Switch, X-LOCK
- X-LOCK for toolless accessory changes
- X-LOCK mechanism enables to install/remove X-LOCK wheels with just a single action without tool; minimizes down-time between wheel changes; minimizes over-tightening and loosening of wheels
- X-LOCK wheel can be easily removed simply by pulling up the lever
- New toolless wheel cover allows for fast and easy angle adjustment and installation/removal of wheel cover
- Outperforming performance and efficiency
- Genuine solution for high demand industrial applications
- Excellent in continuous heavy-duty work
- Active Feedback sensing Technology (AFT) turns the motor off if rotation speed suddenly slows or wheel is forced to stop
- Electric brake for maximum productivity
- BL motor delivers 8,500 RPM
- BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
Cordless Heat Gun
18V LXT Cordless Heat Gun
- Max 550 degrees Celsius air temperature for a wide range of cordless works, e.g. putting up wall paper, drying or removal of paint, and more
- Air temperature can be adjusted from ambient temperature to 550 degrees Celsius
- Max air flow of 200 L/min; Almost as powerful as Competitors’ DC machines
- Quick release mechanism for easy Nozzle replacement; Nozzle can be removed without touching the hot metal part simply by turning Plastic ring
- Up to 30 minutes of continuous run time with 18V LXT 6.0Ah Battery BL1860B (battery not included)
- Trigger switch with lock-on and lock-off functions
- Compatible with current nozzles for AC machines for increased versatility
- Single LED job light with after-glow function illuminates the work area
- Compact and ergonomic design
- Lightweight for reduced operator fatigue
- Rubberized soft grip provides increased comfort on the job
- Hanging hook for increased operator convenience
- Anti-restart function engineered to minimize motor start up when battery is inserted with switch locked on
- Overload protection (fuse)
Portable Power Pack
36V-40Vmax LXT XGT Li-Ion Portable Power Pack
- 1,200 Wh high capacity
- Our first over 1,000 Wh energy capacity battery
- Enables a DUB362 to operate over 1 hour at the highest speed (at dial 6)
- Equipped with built-in battery cells
- Compatible with 18Vx2 LXT, 40Vmax XGT, 36V direct power connection
- Quickly removable harness allows for use as a stationary power pack
- Height-adjustable waist belt for personal fit and comfort
- Main power switch with 8-hour auto-off function
- 4-LED fuel gauge indicates the battery status by four green LEDs
- Wet Guard/ IPX4 compatible when used with the compatible tool
- Intermediate connector between power tool and PDC1200 is automatically disconnected, if the cord from power tool is loaded with a certain weight or over
- Stand enables the user to stand PDC1200 upright on an appropriate workbench and to slip it on user’s back easily, regardless of the position of the waist belt
- Reflectors keep operator visible from a distance even in the dark
- Charger DC4001 specially designed for PDC1200
Cordless Power Cutter
40Vmax X2 (80Vmax) XGT BL AFT Cordless 355 mm (14″) Power Cutter, Electric Brake
- Achieves a cutting depth of 127mm and a high cutting speed that overwhelms that of EK7651H, while featuring low vibration that the competing models cannot achieve
- Low vibration mechanism; Equipped with anti-vibration housing with built-in spring to absorb the vibration from cutting to integrated front and rear handles
- 40Vmax X2 (80Vmax) XGT battery and BL motor for increased cutting efficiency
- Max cutting depth: 127mm (5″); 8-10 rebars of ø16 mm (#5) can be cut together in one shot
- WetGuard/ IPX4-compatible; High water-resistance allows to operate the machine even if it is wet with water
- Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh job site conditions
- Active Feedback sensing Technology (AFT) turns the motor off if rotation speed suddenly slows or wheel is forced to stop
- LED job light; can be turned on/off with a button conveniently located on the rear handle; automatically shuts off when the switch trigger is not pulled for 60 seconds
- Electric brake; having electric brake system that engine power cutters do not have
- Overload indicator lamp; alerts operator of overload with a red blinking LED; reduces unnecessary battery recharging by overload protection
- Lock-off button minimizes accidental start up
- Water supply kit can be connected; the hose is designed to run inside the tool housing to minimize from being caught in objects
- Battery protection circuit protects against overloading, over-discharging and over-heating
Cordless Grass Trimmer
40Vmax X2 (80Vmax) XGT BL ADT AFT Cordless 3-Speed Grass Trimmer, Bike Handle
- Applicable to heavy-duty operation due to high output power similar to 40 mL class engine grass trimmers
- Toolless handle holder for comfortable operation and compact storage
- Automatic torque Drive Technology (ADT) adjusts speed and torque during operation for optimum performance
- Active Feedback sensing Technology (AFT) turns the motor off if blade rotation is suddenly forced to stop
- Rear end mounted motor makes the tool balance similar to engine grass trimmers
- Constant speed control minimizes reduction in rotation speed under load
- 3-speed options (Low / Medium / High) allows the operator to match speed to application
- BL motor is electronically controlled to optimize battery energy use for longer run time per charge
- BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- Compatible with Metal blades, Chip saw blades, Plastic blades and Nylon cutting heads (country-specific)
- Wet Guard/ IPX4-compatible; High water-resistance allows to operate the machine even if it is wet with water
- Reverse rotation system allows operator to quickly clear trimmer head / blade of entangled grass and weeds
- Electric brake for maximum productivity
- Battery protection circuit protects against overloading, over-discharging and over-heating
- Soft start feature for added motor protection
Cordless Metal Cutter
40Vmax XGT BL AFT Cordless 185 mm (7-1/4″) Metal Cutter with Electric Brake, Twin LED Lights
- Designed mainly for single-pass cutting of 65mm metal studs, 2-1/2″ equal angle steel bars and lip channel steel bars
- Max cutting capacity of 67mm (2-5/8″)
The gear size of the final shaft is minimized by using a high torque BL motor, providing 185mm (7-1/4″) CS002G with the same cutting capacity as a 203mm (8″) class corded model
- 40Vmax XGT battery and High torque BL motor deliver high operation efficiency similar or superior to our or the competing corded models
- Improvement in ease to attach/detach Dust box
Dust disposal efficiency is improved by newly using a mechanism which allows for attaching/detaching simply by one-hand operation of a plastic lever
- Equipped with a Lever for opening/closing Safety cover to comply with International Standard
- Active Feedback sensing Technology (AFT) automatically detects a drastic slow down in blade rotation speed, then immediately shuts down the tool to reduce the kickback force
- Built-in dust collection box for cleaner work environment
- Built-in twin LED lights with afterglow function for better illumination and more accurate work
- Electric brake allows you to move on to the next cutting immediately
- Soft start reduces recoil at startup
- Anti-restart function engineered to minimize motor start up when battery is inserted with switch locked on
- Lock-off (2 stage) safety switch for increased operator safety
- Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
- BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- Constant speed control minimizes reduction in rotation speed under load
- Soft grip provides increased comfort on the job
- Battery protection circuit protects against overloading, over-discharging and over-heating
Cordless Jig Saw
18V LXT BL Cordless Top Handle Jig Saw, 3 Orbital Settings plus Straight Cutting, LED Light
- Top handle type cordless jig saw powered by 18V LXT Li-Ion battery, and developed based on model JV103D
- High cutting performance thanks to our 18V LXT platform
- Due to using the same mechanical section as used for model JV103D of our 12Vmax CXT platform, DJV184 achieves not only compact and lightweight design but also cutting efficiency similar or superior to that of DJV180 in the main target application of thin material cutting
- Compact and lightweight for reduced operator fatigue
- BL motor delivers high power
- Variable speed control by trigger helps the user adjust the speed by pulling the trigger gradually when aligning the blade precisely with the chalk lines
- Lock on button for continuous operation
- Soft start allows for accurate landing of the blade on the surface of the workpiece
- 3 orbital settings plus straight cutting for use in a wide range of materials
- Soft no-load rotation reduces vibration and aligns blade with the cutting line easily
- Disabling soft no-load rotation function in operator’s preference
- LED job light (Single LED with light up function during standby mode)
- Toolless blade clamp for easy blade change with one hand
- Ergonomically designed handle with soft grip
- Dust nozzle can be attached for connection to Makita vacuum cleaner
- Electric brake for increased productivity
- Handy rip fence (guide rule) allows you to do extra-accurate straight cuts and circular cuts (optional)
- Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
- Battery protection circuit protects against overloading, over-discharging and over-heating
Cordless Recipro Saw
40Vmax XGT BL AVT Cordless Recipro Saw
- 40Vmax XGT BL AVT Cordless Recipro Saw
- Equipped with BL motor, constant speed control, and orbital function, it exceeds JR001G and achieves efficiency equal or higher than JR3070CT
- By adopting a horizontal crank type counterweight, vibration is reduced much lower than the competing models, reducing hand fatigue during operation
- High power delivered by the BL motor designed to best suit XGT battery
- Increased maneuverability thanks to the lightweight achieved by employing one XGT battery drive instead of two LXT batteries
- High cutting speed (Max 3,000min-ı) with 32mm stroke length provide high cutting efficiency
- Compatible with a wide range of cutting applications; Variable speed control by dial (1,000 – 3,000min-ı) enables user to adjust the max cutting strokes to match the material of workpiece; Extended blade life in stainless cutting applications thanks to max strokes lowered to 1,000min-ı
- Blade ejection lever is relocated to the side of the housing for increased convenience in removing the blade
- Anti-drop mechanism for Shoe; minimizes drop of shoe when adjusting the position of Shoe; Shoe can be removed simply by operating a lever and a button
- Ergonomically designed handle fits your hand well, even during difficult cutting applications such as overhead application, cutting with the saw upside down, etc
- BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- BL motor with high power to weight and size ratio
- Anti-Vibration Technology (AVT) for less vibration
- Tool-less shoe adjustment; Lever system is employed instead of button system. It minimizes the blade lock from unintentional releasing
- Tool-less blade change; Redesign of blade clamp makes it easier to remove a blade
- Retractable tool hook allows to hang the machine on ladder rungs or guard rails of aerial work platform
- Constant speed control minimizes reduction in cutting speed under load
- Electric brake maximizes productivity
- Twin LED job light with preglow and afterglow functions illuminates cutting area
- Extreme Protection Technology (XPT) for use in outdoor applications or harsh environments, protection from dust and dripping water is enhanced.
Battery protection circuit protects against overloading, over-discharging and over-heating.
Cordless Chain Saw
40Vmax XGT BL Brushless Cordless 40 cm (16″) Chain Saw, Tool-less Tension Adjustment
- 40Vmax XGT BL Brushless Cordless 40 cm (16″) Chain Saw, Tool-less Tension Adjustment
- Excellent cutting performance equivalent to 42mL class engine chain saws for smooth felling of trees with about 300mm trunk diameter
- Excellent work efficiency
Thanks to tool-battery digital communication, the current limiting threshold is raised from that of 36V (18Vx2) LXT cordless chain saws, making the 9 models applicable to heavy duty operation
- BL motor delivers 0-25.5 m/s (0-1,530 m/min) (0-5,020 FPM) chain speed for fast cutting
- Main power switch with auto power-off function for battery saving and avoiding unintentional start up
- 80TXL saw chain for increased cutting efficiency
- WetGuard/ IPX4-compatible
High water-resistance allows to operate the machine even if it is wet with water
- Captive nuts minimize loss of nut
- Large oil filling port with view window allows operator to easily add and check bar oil level
- Metal spike bumper firmly grips workpiece to provide more control, making cutting easier
- Adjustable automatic chain lubrication with large oil reservoir
- Soft grip provides increased comfort
- Mechanical brake & electric brake for maximum productivity
- Tool-less chain adjustment for convenient operation and maintenance
- Lock-off function minimizes accidental startup
- Cordless for reduced maintenance
No need to change engine oil or spark plug, clean air filter or drain fuel for storage
- Instant start-up
Simply load a 40Vmax XGT battery and the saw is ready to use
- Battery protection circuit protects against overloading, over-discharging and over-heating
