Cordless Worklight
18V/14.4V LXT Li-Ion Cordless 12 LED Worklight, 3,000 Lumens
- 3 brightness settings: 3,000 lumens on high mode, 1,700 lumens on medium mode or 900 lumens on low mode
- Bright light with a max luminous flux of 3,000 lm
- Approx. 3 / 10 hours of continuous illumination with BL1850B battery at a constant illuminance on high / low mode (3,000 / 900 lm)
- Controller with memory function remembers the brightness setting last time you power off, allowing the user to avoid adjusting brightness again
- LED color is daylight white, which is similar to the natural light and ideal for working spaces
- Highly stable tripod base which is expandable/foldable simply by sliding the carrying handle
- Telescopic light mast enables lighting at a height up to 2.2 m
- Light height is adjustable from 125-224 cm
- Two locking latches are equipped with an adjust screw to tighten when the locking force becomes low
- IP55 certified weather and dust resistance
- Padlock hole for battery theft protection
- Battery capacity warning function automatically notifies the user about reduction in battery capacity with the decrease of illuminance
- Battery port is located at the middle height of the worklight so that the user need not bend down to access the battery
- Shoulder belt can be easily slung over your shoulder for added mobility
- Foldable into a compact size for simple storage and transport
- Tripod is operable by pushing a lock-release button
- Tripod can be securely fixed to the ground with screws or pegs
Cutter
110 mm (4-3/8″) 1,200W Cutter, Dry / Wet Type (country-specific)
- Powerful 1,200W motor delivers 13,000 RPM
- Redesigned base with grooved back surface for smoother operation
- Compact design at only 227mm (8-15/16″) long and weighs only 2.9kg (6.4 lbs) for less operator fatigue
- Easy alignment of base end with the cutting line on workpiece
- Water supply fixture can be mounted
- On-tool hex wrench for fast and easy blade changes and keeping it from lost
- Anti-slip dimples
- Specialized for right angle cutting only
- Flat rear end is convenient for replacing the diamond wheel
- Cuts up to 32mm (1-1/4″)
- Can be used with wet or dry type wheels. (country-specific)
- Easy to adjust depth gauge for precision cutting
- Large top handle design for increased comfort
- Lock-off button helps minimize accidental starts. (For tool with Lock-off button)
- Lock-on button for continuous use operation (For tool with Lock-on button)
- Double insulated for operator safety
- Externally accessible brushes for greater serviceability
- Screw and nut construction for high repairability
Battery Powered Wheelbarrow
18V X2 (36V) LXT BL 4-Wheel Battery Powered Wheelbarrow, Electric Lift, 300 Kg Capacity
- Max load capacity up to 300 kg (661 lbs)
• on flat ground (0 – 3 degrees): 300 kg (661 lbs)
• on slope (3 – 12 degrees): 180 kg (397 lbs)
- Electric lift
• The switch on the battery box enables the user to lift up the flat frame to 1,020mm above ground level electrically (elevated to 1,020mm in approximately 30 seconds)
• The electric lift is limited to use on a flat ground, therefore, the machine is equipped with a level gauge to check the leveling of the machine
- Compatible with various sizes of loads
• L x W: 965 x 645 (mm)
• The front, left, and right guards are designed to be easily lowered below the flat frame by lifting and sliding them, allowing for easy loading and unloading while dragging loads without lifting up them
- 4-wheel barrow (with front-wheel drive system) for stable load-carrying even with heavy loads
- XPT (eXtreme Protection Technology) / IPX4-compatible
High water-resistance allows to operate the machine even if it is wet with water
- Powered by two 18V LXT batteries in series
• Two or four batteries can be installed for a 2-series/2-parallel connection for a secure amount of work
• Equipped with a battery selection switch to choose which combination of 2 batteries to use
- Traveling speed change
• Selection of 3 Forward speeds and F/R rotation by push button
• Stepless variable speed control by switch trigger in each range
- Tubed tire (used for both front and rear wheels)
• No deformation and less air leakage even in long-term storage
• 2-piece split wheel is used for easy repair
- Driving wheels (Front wheels) touch the ground stably
Rear wheel axle is designed to tilt to enable Front wheels (driving wheels) to stably touch the ground for reliable driving even on bumpy road surfaces
- Double tires (Rear wheels only)
• Double tires, each of which rotates independently, improve swivel performance (especially in U-turn when the rear wheels swivel 180º)
• Small diameter double tire structure allows for low platform and high load capacity
- Swivel lock fixes the direction of rear wheels
- Headlights
• turn on/off by pressing a light button on the battery box
• turn off automatically with no operation for 10 minutes
- Red LED taillight
• indicates the presence of the wheelbarrow in the dark to oncoming drivers, walkers, etc
• lights up together with headlights at the same time by pressing a light button
• turns off automatically with no operation for 10 minutes
- Warning beeper
• can alert people around you
• Beep button is located on the inside of Switch box on Right handle
- Tool-less handle height adjustment
Handle height can be adjusted according to user’s height without tool simply by turning 2 knob screws
- Equipped with electric and electromagnetic brakes on top of hand lever-operated mechanical brake
- Neutral mode
• shuts off the power transmission between the motor shaft and the axle in case of no battery installation, low battery capacity or broken motor, enabling to drive the wheelbarrow manually
• Neutral lever is operable only when the hand brake lever is locked
Portable Band Saw
120 x 120 mm (4-3/4″ x 4-3/4″) 710 W Variable Speed Portable Band Saw with Light
- arge 120 x 120 mm (4-3/4″ x 4-3/4″) capacity with excellent tool balance
- Bridge construction of aluminum frame and motor housing makes the machine more durable
- Built-in fluorescent job light for clear view of ink line even in dark places
- Switch for fluorescent job light is independent of main switch
- Preset dial for speed adjustment enables you to obtain suitable cutting speed for each material
- Compact and lightweight for reduced operator fatigue
- Adjustable stopper plate is retractable when cutting pipes near the wall or the floor, increasing maneuverability
- Externally accessible brushes for easy serviceability
- Double insulated
Slide Compound Miter Saw
260 mm (10-1/4″) 1,450 W Slide Compound Miter Saw, LED Light with Cut Line Guide Function
- Saw blade diameter is 255mm (10”) for North America, and 260mm (10-1/4”) for the others
- Cuts up to 310 mm (12-1/4”) at 90° and 220 mm (8-5/8”) at 45°
For North America, cuts up to 305 mm (12”) at 90° and 215 mm (8-1/2”) at 45°
- LED job light with cut line guide function
LED job light casts a shadow of the saw blade onto the workpiece as an exact cutting line. By aligning the shadow with the ink line on the workpiece, you can make an exact cut
- Improved cost competitiveness has been achieved by redesigning the specifications to suit target users and applications
- Sub base can be pulled out for more stable cutting of wide workpiece
- Electric brake for increased productivity and operator protection
- Soft Start feature gradually increases speed to eliminate start up shock
- Sliding Fence (Left Side) can be adjusted outwards when bevel cutting or inwards for increased support of small or delicate materials
- Carrying handle for easy transportation to job site
- Ergonomic Vertical Soft Rubber Grip design for vibration absorption and comfortable operation
- High dust extraction rate – Connects directly to Makita vacuum cleaner for a cleaner work area
- Bevel Capacity of 47° Left or 2° Right
- Miter Capacity of 47° Left and Right with Positive Stops
- Dust bag for a cleaner work environment
- Double insulated for electric protection
Cordless Shear Wrench
40Vmax XGT BL Brushless Cordless M16 (5/8″) / M20 (3/4″) / M22 (7/8″) 804 N·m (593 ft.lbs.)
- WT001G has been developed based on the basic performance of DWT310, yet with lightweight design for improved maneuverability
- Compatible bolt size: M16 (5/8″), M20 (3/4″), M22 (7/8″); the same as those of DWT310/6922NB.
- Work amount: approx. 250 pcs of M22 Torque shear bolt with BL4040
- Lightweight design; Higher maneuverability has been achieved due to the tool weight lighter than DWT310, which has been achieved by using shock-resistant XGT battery to eliminate the need for battery guard and by changing the material of rear cover
- High efficiency;
• The same or higher than that of our corded model 6922NB
• High fastening speed similar to that of our cordless model DWT310
- Large work amount
Fastening capacity of M22 Torque shear bolt:
• Approx. 150 pcs with BL4025
• Approx. 250 pcs with BL4040
- Battery capacity warning lamp;
• LED blinks to notify user of decrease in battery capacity; specifically, it starts
blinking when the capacity is reduced to an amount only enough to fasten approx 10 Torque shear bolts
• LED lamp turns on solid when the tool cannot operate anymore
- Anti-thread-stripping mechanism minimizes the chance that bolt-tip threads might be stripped due to incomplete insertion of Inner sleeve
- Hook designed for use with Shoulder belt to carry the tool
- Shoulder belt (for transportation); Uses the same one as used for DWT310
Cordless Upright Cleaner
40Vmax XGT BL Brushless Cordless 5 L HEPA Upright Cleaner
- High dust pick-up rate corresponding to the gold level of the CRI seal of approval achieved by:
• Using an enhanced motor for higher suction power
• Redesigning suction port
- Increased cleaning width of 381mm provides improved cleaning efficiency compared with 318mm of DVC560
- 5-stage brushroll height adjustment
• The brushroll can be positioned 3mm deeper than that of DVC560, providing increased efficiency in picking up dust and dirt from the depths of carpet
- Low cleaner head with a height of approx 80mm
• Allows for easy entry of the cleaner head into tight places such as under furniture, providing added advantages to users
- Wide bumper covering the front of the head
- Side brush on each side of the cleaner head
• Can brush out the dust accumulated along and close to walls
• Side brushes on both sides enable user to clean close to walls without changing the direction of the appliance
- 3-suction power mode selection push button with mode memory function
- Removable aluminum pipe with integrated handle for cleaning in corners or confined spaces
- Toolless brushroll change for easy maintenance
- Low noise mode allows for use in noise-sensitive environments such as office, hospital and more
- HEPA Filter is used to capture very fine particles effectively
- 5 L Large dust bag capacity enables continuous cleaning work
- Main body able to tilt up to 90 degrees enables to clean in tight spaces under furniture, sofa, bed and more
- Dust disposal warning lamp / Brushroll error lamp / Battery capacity warning lamp
- LED job light with on/off switch is convenient for cleaning in dark places
- Cyclone attachment (sold separately)
• Minimizes clogging of the paper dust bag and the reusable dust bag to reduce decrease in suction power
• Mesh pipe has been redesigned to minimize the chance that dust will become clogged in the cyclone section
Cordless Cable Cutter
18V LXT Li-Ion Cordless Cable Cutter
- Easy operation
Developed specially for cutting only, allowing for lightweight design to provide excellent maneuverability
- Open type for easy cutting of cable at desired position
- For cutting Al / Cu cable
- Automatic reverse function
The movable blade automatically returns to the set position after the cutting is completed
- Adjustable blade return volume
The blade opening angle can be adjusted to suit the diameter of the cable to be cut
- One LED job light with afterglow function
- Shoulder belt is provided as an optional accessory
Cordless Cable Cutter
18V LXT Li-Ion Cordless Cable Cutte
- Easy operation
Developed specially for cutting only, allowing for lightweight design to provide excellent maneuverability
- Closed type for precision cutting
- For cutting Al / Cu cable
- Automatic reverse function
The movable blade automatically returns to the set position after the cutting is completed
- Adjustable blade return volume
The blade opening angle can be adjusted to suit the diameter of the cable to be cut
- One LED job light with afterglow function
- Shoulder belt is provided as an optional accessory
Cordless Nibbler
18V LXT Li-Ion Cordless 1.6 mm (16 Ga) Nibbler
- 18V LXT Li-Ion Cordless 1.6 mm (16 Ga) Nibbler
- Makita-built motor delivers 1,900 SPM for faster and smooth cutting
- Ideal for cutting roofing sheet metal at thicknesses up to 16 gauge
- Die holder rotates 360° to meet demands of cutting direction
- Convenient chip disposal is below cutting material to minimize damage to cutting surface
- Cutting radius: inner edge 45 mm (1-3/4″); outer 50 mm (2″)
- Battery capacity warning system turns light solid red and automatically stops motor to notify user that battery needs to be replaced
- Anti-restart protection minimizes motor start up when battery is inserted with switch locked on
- Rubberized soft grip for improved comfort
- Lock-on sliding switch for continuous operation
- Built-in thickness gauge for convenience
- Externally accessible carbon brushes for greater serviceability
- Easy punch and die replacement for reduced down time on the job
- Battery protection circuit protects against overloading, over-discharging and over-heating
- Common blade with JN1601
Cordless Metal Shear
18V LXT Li-Ion Cordless 1.3 mm Metal Shear
- 18V LXT Li-Ion Cordless 1.3 mm Metal Shear
- Compact and lightweight design for easy handling and high maneuverability
- 360° swivel shear head for increased cutting convenience
- Ergonomically designed rubberized soft grip
- On tool storage for hex wrench
- Lock-off button for safe operation
- 4 pole motor
- More work amount on a single full battery charge and higher work efficiency
- Optional shear head for 16 gauge cutting ability
- Battery protection circuit protects against overloading, over-discharging and over-heating
- Powered by Makita 18V LXT Li-Ion battery
Cordless Metal Shear
18V LXT BL Cordless 2.0 mm (14 Ga) Metal Shear
- 18V LXT BL Cordless 2.0 mm (14 Ga) Metal Shear
- Cuts up to 2.0 mm (14 gauge) steel and 1.6 mm (16 gauge) stainless
- BL motor is electronically controlled to optimize battery energy use for longer run time per charge
- BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- BL motor efficiently uses energy to match torque and SPM to the changing demands of the application
- Tool-free shear head rotates 360° for increased comfort in various cutting positions
- Built-in LED light with afterglow function illuminates the work area
- Ergonomically designed handle with soft grip provides increased comfort on the job
- Lock-on button for continuous operation
- Reversing switch is conveniently located
- Durable, reversible belt clip convenient for temporary tool hanging
- eXtreme Protection Technology (XPT) is engineered to provide improved dust and water resistance for operation in harsh conditions
- Battery protection circuit protects against overloading, over-discharging and over-heating
- Powered by Makita 18V LXT Li-Ion battery
