Cordless Portable Vacuum Cleaner
18V LXT BL Brushless Cordless 7.5 L Dust Class L HEPA Portable 2-Speed Vacuum Cleaner (Wet & Dry)
- Compact. Balance of Suction Power and Work Amount
- Automatic self-cleaning filtration system (optional) is designed to maintain optimum suction efficiency and longer filter life
- BL motor allows 1.6 m³/min of Max air flow / 6.7 kPa of Max sealed suction / 50 W of Suction power and long run time to go together
- HEPA filter is used to capture very fine particles effectively
- Approved for Dust Class L in accordance with the EU standard
- Quiet operation for operator comfort
- Up to 60 minutes of continuous run time using an 18V LXT Li-ion 5.0Ah battery
- LED battery indicator shows charge level for 18V LXT Li-ion battery
- BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- For both wet and dry vacuum cleaning
- 7.5 L Large dust bag capacity enables continuous cleaning work
- Two tools in one; quickly converts from vacuum to blower for increased versatility
- Two speed push button power selection (high/low) for a variety of applications
- Features Extreme Protection Technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions
- Battery compartment keeps the battery protected from harmful debris on the jobsite
- Shoulder belt can be easily slung over your shoulder for added mobility (country-specific)
- Carrying top handle stores out of the way and provides increased comfort during transport
- On-board hose and nozzle storage allow for easy and convenient transport
- Quick-release latch for easy removal and disposal of debris from canister. Battery protection circuit protects against overloading, over-discharging and over-heating. Two tools in one; quickly converts to a blower for added versatility
Table Top Miter Saw
305 mm (12″) 1,650W Table Top Miter Saw, Laser, LED Light
- 2 tools in 1 for convenience and versatility
- Smooth table elevation by just loosening levers and turning knob
- Large cutting capacity: Max cutting width up to 200 mm
- Cuts two layers of 192 mm x 23 mm wood floorings in a single stroke
- Powerful 1,650 W motor delivers 3,800 RPM for fast cutting
- Miter cuts 47° L – 52° R for the most common cutting applications
- Bevel cuts 0° – 45° L for the most common cutting applications
- Heavy gauge aluminum die cast table engineered for improved durability and straighter cuts
- 4 built-in LED job lights brightly illuminate the cut line for precise cutting in the dark place
- Bright 635nm class 2 laser marker allows for easy ink line alignment
- High dust extraction: Available with dust bag and also connectable to vacuum cleaners with hose
- Removable guide rule enables to cut thin and wide materials
- Soft start minimizes the breaker from tripping at job sites
- Soft start suppresses start-up reaction for more control and better accuracy
- Electric brake for maximum productivity and increased operator safety
- Anti-restart function minimizes accidental start-up
- Blade guards for increased operator safety
- Easy to carry with a compact and lightweight body
- Holders are provided on both sides of the tool to hold long workpieces horizontally.
Double insulated for operator safety.
Externally accessible brushes for easy serviceability
Battery Powered Orbital Sander
40Vmax XGT BL AWS 1/3 Sheet Battery Powered Variable Speed Orbital Sander with Built-In Dust Extraction System
- 40Vmax XGT BL AWS 1/3 Sheet Battery Powered Variable Speed Orbital Sander with Built-In Dust Extraction System
- Excellent maneuverability has been achieved by using a connector-style connection to the battery, reducing the load on hand and keeping the overall height low.
- Excellent maneuverability / Lightweight design / Low overall height
• This model employs the connector-style for connection to the battery, achieving the lightweight design and overall height similar to those of pneumatic sanders.
• The tool’s handle is designed to be as close as possible to the sanding surface by reducing the overall height of the tool, achieving a low center of gravity and excellent maneuverability during fine operations.
• The easy-to-attach/detach connector structure allows for easy switching to an optimal product of connector-style sander series depending on various applications such as finish sanding of large surface, corners, etc.
- Powered by 40Vmax XGT Li-Ion battery / Driven by BL motor
Constant speed control suppresses rotation fluctuations due to sanding load, providing stable sanding.
- Connected via connector
• Battery adapter can be connected by inserting the connector into the tool.
• A large lever for easy one-hand attachment/detachment
• Two cord lengths, 1.6m and 5.0m, are available (standard: 1.6m, optional: 5.0m).
- New abrasive paper (net type)
• Compared with the current abrasive papers, the net type papers reduce the chance of being clogged with dust, allowing for long continuous operation.
• Improved efficiency for paints
• The abrasive papers can be attached to the tool with the hook and loop fastener, allowing them to be attached to our current sanders.
- Workability superior to Pneumatic Sanders
• No need for periodic maintenance of air piping
• No need for periodic lubrication or running-in
• No need for a compressor, thus reducing waiting time for refilling after air consumption
• Compared to pneumatic sanders, the tool offers higher energy efficiency and reduces power consumption.
- Reduced wear of pad
• The replacement frequency of the pad due to wear is reduced by attaching a replaceable pad saver between the pad and the abrasive paper.
• Pad saver can be attached to the pad with the hook and loop fastener.
- Tool hanger
The tool hanger can be hooked onto a hook (carabiner) attached to the waist belt.
- Compatible with XPT (eXtreme Protection Technology)
- Dust bag
• The Dust bag’s cap can be removed with a large lever in the same way as the connector of Battery adapter.
• Dust in Dust bag can be discharged easily.
- Connectable to Vacuum cleaners
Selectable from forced dust collection (with vacuum cleaner connected) or self dust collection (with dust bag attached) depending on applications
- Compatible with AWS (Auto-start Wireless System)
- Protection cover set (optional accessory) enables Battery to be carried on the back together with Backpack vacuum cleaner.
- Harness set (optional accessory) enables Battery to be carried on the back.
- Equipped with the following functions:
• Soft start
• Variable speed control
• Constant speed control
• Electric brake
• Anti-restart function
• Toolless attachment change (Hook and loop type)
Die Grinder
6 mm (1/4″) 400 W Die Grinder
- Large Flush-Mount Paddle Switch for Easy Operation
- Powerful 400W motor delivers 25,000 RPM to handle the most challenging applications
- Lower noise at 73dB(A)
- Small diameter barrel grip for added comfort
- Directional air-flow vents channel the tool’s air output away from the user’s face
- Round-shaped collet nut is engineered to minimize damages/scratches to workpiece
- Zig-zag varnish protects the armature coil from dust and debris for longer motor life
- AC/DC switch for use with alternative power source
- Double insulated
Cordless Scarifier
18V LXT BL Cordless 320 mm (12-5/8″) Scarifier
- Overview:
The DUV320 is a 320 mm cordless scarifier powered by an 18V LXT Li-Ion battery. With its compact deck, this machine is lightweight and highly maneuverable, making it ideal for maintaining your lawn at home.
Two types of blades are available. The scarifying blade cuts through old roots and soil to improve water and air penetration, promoting healthy lawns. The dethatching blade (sold separately) removes deposited lawn clippings, accumulated moss, and other debris without cutting, also promoting healthy lawns.
- Two types of blades are available to suit different applications. (Compatible with model UV3200)
• Scarifying blade
For cutting through old roots to promote healthy lawns and for cutting through lawns and soils to improve the penetration of water and air.
Also can be used for thatching, but the amount of thatch it removes is smaller compared to the dethatching blade.
• Dethatching blade (sold separately)
For removing deposited lawn clippings, accumulated moss, etc.
- The working width is 320 mm, and the working depth can be adjusted between -8 mm to +4 mm according to the lawn conditions, operations, and blade wear.
- Warning lamp
• Single red LED on the rear of the battery cover
• Blinks when the battery capacity is low
• Lights up when the battery capacity runs out or the battery cannot be discharged due to an error
- Tool-less foldable handle (Three stages)
The handle can be easily folded in half with two levers, and the handle can also be folded in three stages with the levers and thumb screws.
- Washable cutting deck
The inside of the deck is washable with water for easy maintenance.
* High-pressure water is not allowable.
- Front and rear wheel diameter: ø160 mm
Front and rear wheels of the same diameter, designed to balance traveling and turning performance.
- Water-resistance compatible with XPT
- Ergonomic soft grip for comfortable operation
- Electric brake that stops the blade for user protection
Battery Powered Orbital Sander
40Vmax XGT BL AWS 100 x 150 mm (3-15/16″ x 5-7/8″) Battery Powered Variable Speed Orbital Sander with Built-In Dust Extraction System
- 40Vmax XGT BL AWS 100 x 150 mm (3-15/16″ x 5-7/8″) Battery Powered Variable Speed Orbital Sander with Built-In Dust Extraction System
- Excellent maneuverability has been achieved by using a connector-style connection to the battery, reducing the load on hand and keeping the overall height low.
- Excellent maneuverability / Lightweight design / Low overall height
• This model employs the connector-style for connection to the battery, achieving the lightweight design and overall height similar to that of pneumatic sanders.
• The tool’s handle is designed to be as close as possible to the sanding surface and the center of gravity is optimally balanced to achieve excellent maneuverability during fine operations.
• The easy-to-attach/detach connector structure allows for easy switching to an optimal product of connector-style sander series depending on various applications such as finish sanding of large surface, corners, etc.
- Powered by 40Vmax XGT Li-Ion battery / Driven by BL motor
• Constant speed control suppresses rotation fluctuation to provide stable sanding.
• Work efficiency equal to or superior to those of competing models
- Connected via connector
• Battery adapter can be connected by inserting the connector into the tool.
• A large lever for easy one-hand attachment/detachment
• Two cord lengths, 1.6m and 5.0m, are available (standard: 1.6m, optional: 5.0m).
- New abrasive paper (net type)
• Compared with the current abrasive papers, the net type papers reduce the chance of being clogged with dust, allowing for long continuous operation.
• Improved efficiency for paints
• The abrasive papers can be attached to the tool with the hook and loop fastener, allowing them to be attached to our current sanders.
- Workability superior to Pneumatic Sanders
• No need for periodic maintenance of air piping
• No need for periodic lubrication or running-in
• No need for a compressor, thus reducing waiting time for re-filling after air consumption
• High work efficiency and power consumption approx. 1/10 of Air Sanders
- Reduced wear of pad
• The replacement frequency of the pad due to wear is reduced by attaching a replaceable pad saver between the pad and the abrasive paper.
• Pad saver can be attached to the pad with the hook and loop fastener.
- The pad shapes are switchable between square and triangular depending on applications.
- Compatible with XPT (eXtreme Protection Technology)
- Dust bag
• The Dust bag’s cap can be removed with a large lever in the same way as the connector of Battery adapter.
• Dust in Dust bag can be discharged easily.
- Connectable to Vacuum cleaners
Selectable from forced dust collection (with vacuum cleaner connected) or self dust collection (with dust bag attached) depending on applications
- Compatible with AWS (Auto-start Wireless System)
- Protection cover set (optional accessory) enables Battery to be carried on the back together with Backpack vacuum cleaner.
- Harness set (optional accessory) enables Battery to be carried on the back.
- Equipped with the following functions:
• Soft start
• Variable speed control
• Constant speed control
• Electric brake
• Anti-restart function
• Toolless attachment change (Hook and loop type)
Battery Powered Random Orbit Sander
40Vmax XGT BL AWS 150 mm (6″) Battery Powered Variable Speed Random Orbit Sander with Built-In Dust Extraction System
- 40Vmax XGT BL AWS 150 mm (6″) Battery Powered Variable Speed Random Orbit Sander with Built-In Dust Extraction System
- Excellent maneuverability has been achieved by using a connector-style connection to the battery, reducing the load on hand and keeping the overall height low.
- Excellent maneuverability / Lightweight design / Low overall height
• This model employs the connector-style for connection to the battery, achieving the lightweight design and overall height similar to that of pneumatic sanders.
• The tool’s handle is designed to be as close as possible to the sanding surface and the center of gravity is optimally balanced to achieve excellent maneuverability during fine operations.
• The easy-to-attach/detach connector structure allows for easy switching to an optimal product of connector-style sander series depending on various applications such as finish sanding of large surface, corners, etc.
- Powered by 40Vmax XGT Li-Ion battery / Driven by BL motor
• Constant speed control suppresses rotation fluctuation to provide stable sanding.
• Work efficiency equal to or superior to those of competing models
- Connected via connector
• Battery adapter can be connected by inserting the connector into the tool.
• A large lever for easy one-hand attachment/detachment
• Two cord lengths, 1.6m and 5.0m, are available (standard: 1.6m, optional: 5.0m).
- New abrasive disc (net type)
• Compared with the current abrasive discs, the net type discs reduce the chance of being clogged with dust, allowing for long continuous operation.
• Improved efficiency for paints
• Discs can be attached to the tool with the hook and loop fastener, allowing them to be attached to our current sanders.
- Workability superior to Pneumatic Sanders
• No need for periodic maintenance of air piping
• No need for periodic lubrication or running-in
• No need for a compressor, thus reducing waiting time for re-filling after air consumption
• High work efficiency and power consumption approx. 1/10 of Air Sanders
- Reduced wear of pad
• The replacement frequency of the pad due to wear is reduced by attaching a replaceable pad saver between the pad and the abrasive disc.
• Pad saver can be attached to the pad with the hook and loop fastener.
- Compatible with XPT (eXtreme Protection Technology)
- Dust bag
• The Dust bag’s cap can be removed with a large lever in the same way as the connector of Battery adapter.
• Dust in Dust bag can be discharged easily.
- Connectable to Vacuum cleaners
Selectable from forced dust collection (with vacuum cleaner connected) or self dust collection (with dust bag attached) depending on applications
- Compatible with AWS (Auto-start Wireless System)
- Protection cover set (optional accessory) enables Battery to be carried on the back together with Backpack vacuum cleaner.
- Harness set (optional accessory) enables Battery to be carried on the back.
- Equipped with the following functions:
• Soft start
• Variable speed control
• Constant speed control
• Electric brake
• Anti-restart function
• Toolless attachment change (Hook and loop type)
Battery Powered Random Orbit Sander
40Vmax XGT BL AWS 125 mm (5″) Battery Powered Variable Speed Random Orbit Sander with Built-In Dust Extraction System
- 40Vmax XGT BL AWS 125 mm (5″) Battery Powered Variable Speed Random Orbit Sander with Built-In Dust Extraction System
- Excellent maneuverability has been achieved by using a connector-style connection to the battery, reducing the load on hand and keeping the overall height low.
- Excellent maneuverability / Lightweight design / Low overall height
• This model employs the connector-style for connection to the battery, achieving the lightweight design and overall height similar to that of pneumatic sanders.
• The tool’s handle is designed to be as close as possible to the sanding surface and the center of gravity is optimally balanced to achieve excellent maneuverability during fine operations.
• The easy-to-attach/detach connector structure allows for easy switching to an optimal product of connector-style sander series depending on various applications such as finish sanding of large surface, corners, etc.
- Powered by 40Vmax XGT Li-Ion battery / Driven by BL motor
• Constant speed control suppresses rotation fluctuation to provide stable sanding.
• Work efficiency equal to or superior to those of competing models
- Connected via connector
• Battery adapter can be connected by inserting the connector into the tool.
• A large lever for easy one-hand attachment/detachment
• Two cord lengths, 1.6m and 5.0m, are available (standard: 1.6m, optional: 5.0m).
- New abrasive disc (net type)
• Compared with the current abrasive discs, the net type discs reduce the chance of being clogged with dust, allowing for long continuous operation.
• Improved efficiency for paints
• Discs can be attached to the tool with the hook and loop fastener, allowing them to be attached to our current sanders.
- Workability superior to Pneumatic Sanders
• No need for periodic maintenance of air piping
• No need for periodic lubrication or running-in
• No need for a compressor, thus reducing waiting time for re-filling after air consumption
• High work efficiency and power consumption approx. 1/10 of Air Sanders
- Reduced wear of pad
• The replacement frequency of the pad due to wear is reduced by attaching a replaceable pad saver between the pad and the abrasive disc.
• Pad saver can be attached to the pad with the hook and loop fastener.
- Compatible with XPT (eXtreme Protection Technology)
- Dust bag
• The Dust bag’s cap can be removed with a large lever in the same way as the connector of Battery adapter.
• Dust in Dust bag can be discharged easily.
- Connectable to Vacuum cleaners
Selectable from forced dust collection (with vacuum cleaner connected) or self dust collection (with dust bag attached) depending on applications
- Compatible with AWS (Auto-start Wireless System)
- Protection cover set (optional accessory) enables Battery to be carried on the back together with Backpack vacuum cleaner.
- Harness set (optional accessory) enables Battery to be carried on the back.
- Equipped with the following functions:
• Soft start
• Variable speed control
• Constant speed control
• Electric brake
• Anti-restart function
• Toolless attachment change (Hook and loop type)
Cordless Pole Hedge Trimmer
40Vmax XGT BL Brushless Cordless 60 cm (23-5/8″) Pole Hedge Trimmer
- 40Vmax XGT BL Brushless Cordless 60 cm (23-5/8″) Pole Hedge Trimmer
- Model UN001G is a cordless pole hedge trimmer powered by a 40Vmax XGT Li-Ion battery
• This model is capable of cutting thick branches with high power, comparable to engine models
• It is also the lightest in its class, offering excellent usability
• It is equipped with a grease nipple for easy maintenance
- Designed to be lightweight and capable of cutting thick branches
• This model is capable of cutting thick branches due to an increased power obtained by the 40Vmax XGT li-ion battery and thick blades
• Higher operator’s convenience has been achieved by drastically reducing the weight of the tool compared to competing engine models
- Three-facet obliquely ground blade
The same blades as those of UH006G (Double-sided rough-cut type)
- High water-resistance compatible with XPT / IPX4
- New lock-off mechanism
By adding a lock lever to the lock-off lever, we have revised the automatic power-off time, enhancing work efficiency in the regions required to comply with the safety standard for the lock-off lever
- Improved durability of Angle adjustment section
The structures have been redesigned to reduce sliding wear of Head section angle adjustment mechanism, thereby reducing the occurrence of backlash
- Lubrication is possible with a grease gun
• Maintenance efficiency has been improved by adding a grease nipple and allowing oil to be supplied with a grease gun without removing the bolt on the oil supply port
• An oil supply port similar to that of DUN500W is also located on the bottom of Gear case and users who do not own a grease gun can remove the bolt and supply grease with a grease tube as with our current models
- Optimal balance of Head section
Head section is positioned on the extended line of the pole to provide an optimal balance, reducing forearm fatigue
- Reverse rotation system frees the blades when it is jammed by thick branches
- 3-speed design for optimum speed control
- Angle adjustable hedge trimmer head; 45° tilt-up to 70° tilt-down from the horizontal position
- Constant speed control maintains constant speed under load
- Can be folded in the 180° position for easy transport and storage
- Equipped with two grips
- Equipped with Electric brake
