DBM230
Diamond Core Drill
230 mm (9″) 2,300 W Diamond Core Drill
- Diamond core drill with 3-speed change control
- LED light is provided to indicate overload
- Equipped with earth leakage breaker
DA3010F
Angle Drill
10 mm (3/8″) 450 W Angle Drill with Keyed Chuck, LED job light
- Light Up Your Drilling Surface with L.E.D. Power
- Powerful 450W motor with less weight
- Variable speed (0 – 2,400 RPM) for drilling in a wide variety of materials
- Compact design (270 mm (10-5/8″) long and 66 mm (2-5/8″) head width) for use when working between framing studs and other close quarter applications
- Paddle switch with speed limiting dial to prevent over-tightening of fasteners
- Built-in clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
- Small diameter barrel grip for easy handling
- Built-in L.E.D. light illuminates the work area
- All-ball bearing construction for longer tool life
- Push button type reverse switch
- Double insulated
DP4010
2-Speed Drill
13 mm (1/2″) 720 W Variable 2-Speed Reversing Drill with Keyed Chuck
- High speed and high efficiency
- Powerful 720 W motor
- Aluminum gear housing provides high quality and toughness
- Extra-rigid cylindrical housing
- 2-speed gear selection with variable speed in each range for a wide range of applications
- Ergonomically designed handle with rubberized soft grip
- Built-in torque limiter helps prevent kickback
- Forward/Reverse switch for easy switching between operating modes
- Depth gauge for increased drilling consistency
- Double insulated for operator safety
6412
Drill
10 mm (3/8″) 450 W Variable Speed Reversing Drill with Keyed Chuck
- General Purpose Drill Featuring Compact And Lightweight Design
- Compact and lightweight, yet with enough power
- Ergonomically designed handle with rubberized soft grip provides more control and comfort
- Chuck capacity: 1.5-10mm (1/16″-3/8″)
- In-line design brings drilling pressure in line with center of drill bit axis
- All ball bearing construction for smooth and durable operation
- Variable speed (0 – 3,400 RPM) for drilling in a wide variety of materials
- Powerful motor with 450W Continuous Input
- Keyed Chuck
- Forward/Reverse switch for easy switching between operating modes
- Lock-on Button for continuous operation
- Lanyard Loop for attachment of lanyard when working at heights
- Double insulated
DP2010
High Speed Drill
6.5 mm (1/4″) 370 W High Speed Variable Speed Reversing Drill with Keyed Chuck
- Designed For High Drilling Efficiency
- With 4,200 RPM high speed rotation, ideal for fast drilling of small holes
- Compact, yet with high power
- Forward/Reverse switch for easy switching between operating modes
- Variable speed dial enables operator to adjust drilling speed based on materials or application
- Ergonomic soft rubber grip design for vibration absorption and comfortable operation
- In-line positive grip design maximises power thrust
- 6.5 mm (1/4″) drill chuck engineered for positive bit retention
- Depth gauge for increased drilling consistency
- Double insulated
TD0101
Impact Driver
100 N･m (74 ft.lbs.) Impact Driver
- Compact design for perfect handling
- Externally accessible carbon brush
- No harm to the wrist when a screw is seated
- Enables to drive screws even without pre-drilling pilot holes
- Variable speed
- Reversing switch
- Double insulated
TD022D
Cordless Impact Driver
7.2V Li-Ion Cordless Two-Position 25 N·m (220 in.lbs.) Impact Driver
- Delivers 25 N·m (220 in.lbs.) of Max Torque in a compact design
- 0-2,450 RPM and 0-3,000 IPM for reduced fastening time
- 40% more work amount and 10% higher work speed than TD021D
- LED job light with pre-glow function brightly illuminates a spot and the periphery by enlarging the illuminated area than TD021D
- Battery protection system automatically cuts off power to the motor when the remaining battery capacity gets too low to extend battery life
- Compact and lightweight design with precision control and high fastening torque
- Comfortable grip design operates in straight or pistol grip positions
- Can be also used as a hand driver
- Multi-function variable speed rotary switch allows operator to adjust driving speed and direction simultaneously for precise fastening applications
- Switch position enables easy access for left or right handed users
- Soft grip handle provides increased comfort on the job
- Adjustable handle with enhanced hinge mechanism for operational versatility
- Convenient 6.35 mm (1/4″) hex chuck for quick bit changes
- Electric brake for maximum productivity and increased operator safety
- Lock button prevents accidental startup
DF001D
In-Line Cordless Screwdriver
3.6V Li-Ion In-Line Cordless 6.0 N·m (53 in.lbs.) Screwdriver, Built-In Battery
- Convenient in a narrow space
- Operates in straight or pistol grip positions for comfortable operation
- Delivers 6.0 N·m (53 in.lbs.) of max torque in a compact design
- Work amount is about 1.4 times as large as 6723DW
- Built-in LED job light with independent on/of switch
- On/off switch with forward and reverse modes
- Compact and lightweight for reduced operator fatigue
- Soft grip handle provides increased comfort on the job
- Powered by a built-in rechargeable battery
- Includes Micro USB type AC adapter
- Battery protection circuit protects against over-discharging and over-heating
- Includes 81-piece bit set (country-specific)
DF012D
Cordless Driver Drill
7.2V Li-Ion Cordless Two-Position 5 mm (3/16″) 8 N·m (71 in.lbs.) Driver Drill
- Up to X2 More Work Amount than DF010D
- Delivers 8.0 N·m (71 in.lbs.) of Max Torque in a compact design
- Ultra-lightweight and compact tool
- LED job light brightly illuminates a spot and the periphery by enlarging the illuminated area than DF010D
- Compact 6.35 mm (1/4″) hex chuck for quick bit changes
- Auto-stop clutch: tool shuts off when clutch disengages for extra fastening control; prevents overdriving the fastener
- 2-Speed design (200 RPM and 650 RPM) for high or low torque applications
- Comfortable grip design operates in straight or pistol grip positions
- Can be also used as a hand driver
- Soft grip handle provides increased comfort on the job
- 21 Clutch settings and drill mode for added fastening control
- Built-in LED light flashes when it is time to recharge the battery
- Lock lever prevents accidental startup
- Battery protection system automatically cuts off power to the motor when the remaining battery capacity gets too low to extend battery life
TW100D
Cordless Impact Wrench
10.8V (12V max) Li-Ion Cordless 3/8″ (9.5 mm) 110 N·m (1,000 in.lbs.) Impact Wrench
- Makita-built motor delivers 110 N·m (1,000 in.lbs.) of Max Torque in an ultra compact size
- Variable speed (0-2,300 RPM & 0-3,000 IPM) for a wide range of fastening applications
- Ultra compact design at only 163 mm (6-3/8″) long and lightweight for reduced operator fatigue
- Built-in LED light with pre-glow function illuminates the work area
- Convenient 3/8″ (9.5 mm) square drive for quick socket changes
- 3/8″ (9.5 mm) square drive fits most common automotive sockets
- Ergonomic shape fits like a glove with even pressure and easy control
- Soft grip handle provides increased comfort on the job
- Makita’s proprietary hammer and anvil are made using the highest quality steel and heat hardened to last longer
- Electric brake for increased operator safety
- Reversing switch is conveniently located
- Phosphorescent bumper glows in dark places
CB100D
Cordless Heated Blanket
12Vmax CXT Li-Ion Heated Blanket
- Can be used as a lap blanket. And thanks to snap buttons and draw cord, can also be used as a shawl and a warming overskirt
- The shell material is easy-to-clean polyester while the lining is made of soft polyester faux fur
- Machine-washable and machine-dryable
- Battery pocket for secure storage of the battery
- 3 heat settings (high/ medium/ low) for desired warmth
- Heating element • Quantity and position: 1 in the upper center • Size: 350mm×250mm • Heat value: approx the same as that of our cordless heated vests
- Material • Shell: Easy-to-clean polyester (the same one as used for model DCV202) • Lining: Polyester faux fur
- Material color Available in two color combinations: • Shell: black, Liner: navy • Shell: dark brown, Liner: brown
- Blanket size: 1.4m×0.7m
- Stay warm in cold harsh job site environments
- Up to 14 hours of heat with battery
- On/Off heat controller with LED indicator (blue / white / red)
- 1.5m extension cord extends the distance between the battery holder and the blanket, enabling you to use the blanket with the battery on the desk
- Compatible with both LXT and CXT batteries; The battery holders are the same ones as used for our cordless heated vests and jackets (DCV202 series and DCJ205 series)
- Compatible with the current battery holders
- Battery protection system provides over-discharge protection for enhanced battery cycle life and overall battery life
- The folded blanket can be stored in storage bag when not in use
DCV202
Cordless Heated Vest
18V / 14.4V LXT Li-Ion Heated Vest
- Washable and Dryable
- 4 heat zones (right/left hand pockets / back / back neck) provide optimum heat distribution
- Fleece lining improves warmth during power off
- Two-way zipper provides better usability when wearing a tool pouch
- Stay warm in cold harsh job site environments
- Up to 35 hours of heat with BL1860(B) battery
- 3 heat settings (high / medium / low) for precise heating control
- On/Off heat controller with LED indicator (blue / medium / red)
- Features 4 pockets: zippered chest pocket, side pockets (left and right) and lower left pocket
- Zippered chest pocket enables mobile devices to be charged and stored while wearing vest
- Battery pocket on rear left side for quick and easy access
- Shell: 100% Polyester, Side: 85% Polyester, 15% Spandex, Lining: 100% Polyester
- Fitted design with elastic side panels enable maximum operator comfort and flexibility when worn with additional outer layers
- Battery protection system provides over-discharge protection for enhanced battery cycle life and overall battery life
- Available in Small, Medium, Large, XL, 2XL, 3XL
