Demolition Hammer
18.6 J AVT SOFT NO LOAD Demolition Hammer, SDS-MAX Bits
- AVT (Anti Vibration Technology) ensures extra-low vibration performance
- Vibration absorbing handle provides comfortable operation
- Suppression of motor speed during no-load reduces vibration of tool body
- Compact power with less weight
- Powerful 1,510 W motor delivers 18.6 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications
- Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
- Soft start suppresses start-up reaction for more precision and better accuracy
- L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
- L.E.D. power light indicates switch failure or cord damage
- Variable speed control dial enables user to match the speed to the application for greater versatility
- Extended life brushes are longer for more work between service intervals and less downtime
- 12 Bit angle settings allow the bit to be set at different positions for operating convenience
- One-touch sliding chuck for easy bit changes
- Automatic brush cut-off protects commutator from damage for longer tool life
- Rubberized ergonomic soft grip provides more comfort
- Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
- Soft grip provides more comfort and control
- Increased repairability with simplified wiring and bit holding mechanism
- Double insulated
Demolition Hammer
7.6 J Demolition Hammer, SDS-MAX Bits
- Compact Power with Less Weight
- Powerful 1,100 W motor delivers 7.6 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications
- Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
- Soft start suppresses start-up reaction for more control and better accuracy
- L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
- L.E.D. power light indicates switch failure or cord damage
- Variable speed control dial enables user to match the speed to the application for greater versatility
- Extended life brushes are longer for more work between service intervals and less downtime
- 12 Bit angle settings allow the bit to be set at different positions for operating convenience
- One-touch sliding chuck for easy bit changes
- Automatic brush cut-off protects commutator from damage for longer tool life
- Rubberized ergonomic soft grip provides more comfort
- Easy-to-operate slide switch
- Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
- Increased repairability obtained by using ingenious Brush holder unit for simplified wiring
- Double insulated
Rotary Hammer
40 mm (1-9/16″) 8.3 J Rotary Hammer, SDS-MAX Bits
- Powerful 1,100 W motor delivers 8.3 J of impact energy to handle the most demanding applications
- Lock-on or trigger activation in “Chipping Only” mode with a push button start/stop control
- Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
- Soft start suppresses start-up reaction for more control and better accuracy
- LED service light notifies the user approximately 8 hours before the brushes need to be replaced
- LED power light indicates switch failure or cord damage
- Variable speed control dial enables user to match the speed to the application for greater versatility
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
- Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
- Depth gauge for increased drilling consistency
- Double insulated
Rotary Hammer
40 mm (1-9/16″) 8.0 J AVT SOFT NO LOAD Rotary Hammer, SDS-MAX Bits
- Powerful 1,100 W motor delivers 8.0 J of impact energy to handle the most demanding applications
- Anti-Vibration Technology (AVT) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 5 m/s²
- Air actuated counterbalance directs air pressure from the crank and barrel room into the counterbalance cylinders to move counterweight pistons in the opposite direction of the drive piston actively reducing vibration
- Vibration absorbing housing features a spring loaded main handle and upper housing that move independently of the motor and drive mechanism efffectively isolating most of the vibration away from the user
- Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations from the drill bit
- Lock-on or trigger activation in “Chipping Only” mode with a push button start/stop control
- Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
- Soft start suppresses start-up reaction for more control and better accuracy
- LED service light notifies the user approximately 8 hours before the brushes need to be replaced
- LED power light indicates switch failure or cord damage
- Variable speed control dial enables user to match the speed to the application for greater versatility
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
- Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
- Depth gauge for increased drilling consistency
- Double insulated
Combination Hammer
28 mm (1-1/8″) 2.8 J Combination Hammer, SDS-PLUS Bits
- Torque Limiting Clutch Engineered to Prevent Gear Damage
- Powerful 800 W motor delivers 2.9 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications
- 3 operation modes – hammering, hammering with rotation, rotation
- “No hammering when idling” function helps increase tool life
- Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
- Ergonomic “D-shaped” handle with rubberized soft grip for increased comfort
- Recessed lock-on button for continuous operation
- Extended life brushes for more work between service intervals and less downtime
- Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
- Depth gauge for increased drilling consistency
- Double insulated
Combination Hammer with Self Dust Collection
26 mm (1″) 2.2 J Combination Hammer with HEPA Self Dust Collection, SDS-PLUS Bits
- HEPA Filter Removes Particles with an Efficiency Rating of 99.75%
- Dust collecting port on telescopic guide with a sliding range of 190 mm enables to accept longer drill bits
- Secure connection between dust case and dust collecting section for less dust leakage
- See-through dust case for easy checking of collected dust amount
- Easy dust case removal for convenient dust disposal and cleaning
- Easy to adjust position of dust collecting port
- A desired drilling depth can be obtained simply by sliding a push button on telescopic guide
- Easy-to-grip handle gives maximum power thrust and provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
- Soft grip provides more comfort and control
- Powerful 800 W motor delivers 2.2 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications
- Torque limiter stops rotation if bit jams for increased operator safety and enhanced motor protection
- 3-Mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only” for multiple applications
- Variable speed trigger allows operator to adjust speed based on materials or application
- Depth gauge for increased drilling consistency
- Recessed lock-on button for continuous use
- Double insulated
Combination Hammer
26 mm (1″) 2.4 J Combination Hammer, SDS-PLUS Bits
- Re-located operating mode lever for increased protection and durability; enables switch to rotate both left and right
- Improved bit guide for increased bit stability during drilling applications
- Easy-to-grip handle gives maximum power thrust and provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
- Soft grip provides more comfort and control
- High durability design with zig-zag armature varnish, enhanced sealing, improved impact bolt and impact reducing cushion ring
- Compact & Lightweight design obtained by minimizing motor weight, with a newly designed tool-structure
- Powerful 800 W motor delivers 2.4 J of impact energy to handle the most demanding applications
- Torque limiter stops rotation if bit jams for increased operator safety and enhanced motor protection
- Forward/reverse lever – position of the switch allows brushes to be positioned so that the drill maintains same speed and torque in forward and reverse
- 3-Mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only”
- Variable speed trigger allows operator to adjust speed based on materials or application
- 40 Bit angle settings allow the bit to be set at optimum positions
- One-touch sliding chuck for easy bit installation and removal
- Depth gauge for increased drilling consistency
- Recessed lock-on button for continuous use
- Optional dust cup connectable to Makita vacuum cleanesr without joint parts
- Double insulated
Combination Hammer
24 mm (15/16″) 2.4 J Combination Hammer, SDS-PLUS Bits
- High durability design with zig-zag armature varnish, enhanced sealing, improved impact bolt and impact reducing cushion ring
- Extended life brushes are longer for more work between service intervals and less downtime
- Speed and torque in reverse are the same as forward rotation by using brush holder unit
- Powerful 780 W motor delivers 2.4 J of impact energy to handle the most demanding applications
- Torque limiter engineered to prevent gear damage by automatically disengaging gears if the bit binds
- 40 Bit angle settings allow the bit to be set at optimum positions
- 3-Mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only”
- “No hammering when idling” function helps increase tool life
- Ergonomic “Pistol-shaped” handle with soft grip for increased comfort and control
- One-touch sliding chuck for quick bit changes
- Recessed lock-on button for continuous use
- Rubber housing bumper protects mode selector switch and gear housing from damage
- Variable speed control enables user to match the speed to the application
- Depth gauge for increased drilling consistency
- Connectable to Makita vacuum cleaners
- Double insulated
Rotary Hammer
52 mm (2-1/16″) 19.1 J Rotary Hammer, SDS-MAX Bits
- Powerful 1,510 W motor delivers 19.1 J of impact energy to handle the most demanding applications
- Lock-on or trigger activation in “Chipping Only” mode with a push button start/stop control
- Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
- Soft start suppresses start-up reaction for more control and better accuracy
- LED service light notifies the user approximately 8 hours before the brushes need to be replaced
- LED power light indicates switch failure or cord damage
- Variable speed control dial enables user to match the speed to the application for greater versatility
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
- Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
- Depth gauge for increased drilling consistency
Rotary Hammer
40 mm (1-9/16″) 6.1 J Rotary Hammer, SDS-MAX Bits
- Built-in torque limiting clutch disengages if bit jams
- Powerful 1,050 W motor delivers for the most demanding applications
- One-touch sliding chuck for quick & easy bit changes
- Dual mode operation rotation with hammering and hammering only
- Soft grip helps reduce vibration felt by the end-user
- No hammering when idling increases the tool life and performance
- Chisel lock allows the end-user to set their chisel in one of 12 positions
- Built-in torque limiter ensures stable torque control
- Soft grip helps reduce vibration felt by the end-user
- Recessed operation mode switch helps prevent it from being damaged
- Depth gauge for increased drilling consistency
- Double insulated
Rotary Hammer
20 mm (3/4″) Adapted for SDS-PLUS bits
- 2 operation modes -hammering with rotation and rotation only
- Variable speed + reversible rotation
Rotary Hammer
22 mm (7/8″) 2.2 J Rotary Hammer, SDS-PLUS Bits
- High durability in mechanical parts, motor and carbon brush
- 2.2 Joules (EPTA) impact energy delivers high performance
- 2 operation modes – hammering with rotation and rotation only
- Speed and torque in reverse are the same as forward rotation by using brush holder unit
- One-touch sliding chuck enables easy bit change
- Variable speed trigger allows operator to adjust speed based on materials or application
- Torque limiter stops rotation if bit jams for increased operator safety and enhanced motor protection
- Ergonomically designed rubberized grip provides more control and comfort
- Side grip with elastomer soft grip
- Easy-to-operate large trigger switch and lock-on button
- Depth gauge for increased drilling consistency
- Double insulated
