M0900B

Angle Grinder

100 mm (4”) 540 W Angle Grinder, Slide Switch

  • High performance and durability at less expense
  • Designed for light duty applications
  • Powerful 540 W motor delivers 12,000 RPM for the most demanding applications
  • Two action safety switch for preventing sudden accidental lock-on
  • Lock-on feature for continuous operation
  • Wheel cover protects operator from accidental scattering of broken wheel or workpiece with minimal wheel cover movement
  • Shaft lock for easy wheel changes
  • Double insulated

M4101B

Cutter

125 mm (5″) 1,250 W Cutter, Dry / Wet Type (country-specific)

  • High performance and durability at less expense
  • Powerful 1,250 W motor delivers 12,000 RPM
  • Cuts up to 40 mm (1-9/16″)
  • Redesigned base with grooved back surface for smoother operation
  • Newly designed blade case protects the depth guide from being deformed during operation
  • Compatible with 110 mm (4-3/8″) Diamond cup wheel
  • Compact and lightweight design for less operator fatigue
  • Water supply tube holder allows for easy installation/removal of the tube (country-specific)
  • Easy alignment of base end with the cutting line on workpiece
  • Specialized for right angle cutting only
  • Can be used with wet or dry type wheels (country-specific)
  • Easy to adjust depth gauge for precision cutting
  • Vent of motor housing is drip-resistant
  • Flat rear end is convenient for replacing the diamond wheel
  • Large top handle design for increased comfort
  • Lock-off button helps prevent accidental starts (For tool with Lock-off button)
  • Lock-on button for continuous use operation (For tool with Lock-on button)
  • On-tool hex wrench for fast and easy blade changes and keeping it from lost
  • Double insulated. Externally accessible brushes for greater serviceability

M4100B

Cutter

110 mm (4-3/8″) 1,200 W Cutter, Dry / Wet Type (country-specific)

  • High performance and durability at less expense
  • Ergonomically designed handle fits your hand perfectly to provide maximum comfort and control
  • Powerful 1,200 W motor delivers 13,000 RPM
  • Redesigned base with grooved back surface for smoother operation
  • Compact and lightweight for less operator fatigue
  • Easy alignment of base end with the cutting line on workpiece
  • Water supply fixture can be mounted
  • On-tool hex wrench for fast and easy blade changes and keeping it from lost
  • Specialized for right angle cutting only
  • Flat rear end is convenient for replacing the diamond wheel
  • Cuts up to 32 mm (1-1/4″)
  • Can be used with wet or dry type wheels (country-specific)
  • Easy to adjust depth gauge for precision cutting
  • Large top handle design for increased comfort
  • Lock-off button helps prevent accidental starts (for tool with lock-off button)
  • Lock-on button for continuous use operation (for tool with lock-on button)
  • Screw and nut construction for high repairability
  • Double insulated
  • Externally accessible brushes for greater serviceability

M0401B

Cutter

110 mm (4-3/8″) 1,200 W Cutter, Dry / Wet Type (country-specific)

  • High performance and durability at less expense
  • Powerful 1,200 W motor delivers 13,800 RPM
  • Cuts up to 32 mm (1-1/4″)
  • Redesigned base with grooved back surface for smoother operation
  • Compact design at only 231 mm (9-1/8″) long and weighs only 2.6 kg (5.7 lbs) for less operator fatigue
  • Can be used with wet or dry type wheels (country-specific)
  • Water supply tube holder allows for easy installation/removal of the tube
  • Easy alignment of base end with the cutting line on workpiece
  • Specialized for right angle cutting only
  • Easy to adjust depth gauge for precision cutting
  • Flat rear end is convenient for replacing the diamond wheel
  • Large top handle design for increased comfort
  • Lock-off button helps prevent accidental starts (For tool with Lock-off button)
  • Lock-on button for continuous use operation (For tool with Lock-on button)
  • On-tool hex wrench for fast and easy blade changes and keeping it from lost
  • Externally accessible brushes for greater serviceability
  • Double insulated

M2402B

Portable Cut-off

355 mm (14″) 2,200 W Portable Cut-Off

  • 2,200 W continuous rating input (for high voltage areas only); The same high value as the competing models is achieved by changing the armature winding and by redesigning the air-cooling
  • High performance and durability at less expense
  • Powerful 2,200 W motor delivers 3,900 RPM for superior performance and durability
  • Large cutting capacity; Cuts up to 127 mm (5″) round and 102 mm (4″) x 194 mm (7-5/8″) rectangular
  • Adjustable spark guard designed to divert sparks
  • Two-stage lock-off power button for operator convenience (country-specific)
  • Adjustable guide plate provides three angle settings up to 45° L/R
  • Chain secures cutting head in down position for transport and storage
  • Large ergonomic handle (horizontal) allows for smooth saw head operation with reduced fatigue
  • Carrying handle is ergonomically positioned to provide a balanced weight distribution for increased comfort while transporting the saw
  • Lightweight for increased job site portability
  • Quick release vise for increased operator convenience
  • Onboard hex wrench for fast and easy blade changes and keeping it from lost
  • Spindle lock for easy wheel changes
  • Externally accessible brushes for easy serviceability
  • Double insulated

M8600B

Demolition Hammer

7.2 J Demolition Hammer, accepts 17 mm Hex Shank Bits

  • High performance and durability at less expense
  • Satisfactory chipping performance
  • Soft grip provides more comfort and control
  • Compact and lightweight design for reduced operator fatigue
  • Easy-to-hold barrel-chuck section for easier two-handed push chiseling
  • Double insulated

M8700B

Rotary Hammer

22 mm (7/8″) 1.9 J Rotary Hammer, SDS-PLUS Bits

  • High performance and durability at less expense
  • Re-located operating mode lever for increased protection and durability
  • Improved bit guide for increased bit stability during drilling applications
  • Easy-to-grip handle gives maximum power thrust and provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
  • Soft grip provides more comfort and control
  • Powerful 710 W motor delivers 1.9 J of impact energy to handle the most demanding applications
  • Torque limiter stops rotation if bit jams for increased operator safety and enhanced motor protection
  • Forward/reverse lever – position of the switch allows brushes to be positioned so that the drill maintains same speed and torque in forward and reverse
  • 2-mode operation for “Rotation Only” or “Hammering with Rotation”
  • Variable speed trigger allows operator to adjust speed based on materials or application
  • One-touch sliding chuck for easy bit installation and removal
  • Depth gauge for increased drilling consistency
  • Recessed lock-on button for continuous use
  • Double insulated

M6600B

Mixer

165 mm (6-1/2″) 800 W Variable Speed Mixer

  • High performance and durability at less expense
  • Powerful 800 W motor for improved mixing performance
  • Variable speed trigger allows operator to adjust speed based on materials or application
  • Suitable for mixer paddles up to Ø165 mm (6-1/2″) with a M12 or M14 thread (country-specific)
  • D-handle can be attached (country-specific)
  • Soft grip for increased operator comfort
  • Compact and lightweight for reduced operator fatigue
  • Externally accessible brushes for easy serviceability
  • Double insulated

M0801B

Hammer Drill

16 mm (5/8″) 500 W Variable Speed Reversing Hammer Dril with Keyed Chuck

  • High performance and durability at less expense
  • Powerful 500 W motor with 0-3,200 RPM & 0-48,000 BPM for the most demanding applications
  • In-line positive grip design maximises power thrust
  • Recessed lock-on button for continuous use
  • Reversing switch is conveniently located
  • 360° swivel side handle
  • Variable speed control dial enables user to match the speed to the application
  • 2-mode operation for “Rotation Only” or “Hammering with Rotation” for multiple applications
  • Double insulated

M6200B

Drill

13 mm (1/2″) 800 W Variable Speed Drill with Keyed Chuck

  • High performance and durability at less expense
  • Powerful 800 W motor with variable speed for improved mixing and drilling performance
  • Variable speed (0 – 700 RPM) for mixing and drilling in a wide variety of materials
  • Lightweight for reduced operator fatigue
  • Optional D-handle can be attached
  • Soft grip for increased operator comfort
  • 13 mm (1/2″) drill chuck engineered for positive bit retention
  • Large trigger switch for smooth and easy operation
  • Ideal for mixing drywall mud, plaster and drilling large holes and more
  • Externally accessible brushes for easy serviceability
  • Double insulated

M6202XB

Drill

13 mm (1/2″) 580 W Drill

  • High performance and durability at less expense
  • Commercially available polishing attachments can be attached
  • Powerful 580 W motor for continuous operation
  • High speed 2,000 RPM for marble polishing
  • In-line positive grip design maximises power thrust
  • Ergonomically designed handle with sure grip
  • Side grip rotates 360° for comfort and control
  • Lock on button for continuous operation
  • Double insulated

M6501B

High Speed Drill

6.5 mm (1/4″) 230 W High Speed Variable Speed Reversing Drill with Keyed Chuck

  • High performance and durability at less expense
  • Ideal for drilling smaller holes in wood & steel
  • High speed 0-4,500 RPM for fast drilling
  • Variable speed trigger allows operator to adjust speed based on materials or application
  • Powerful 230 W motor for continuous operation
  • Soft grip handle provides increased comfort on the job
  • In-line positive grip design maximises power thrust
  • Compact and lightweight for reduced operator fatigue
  • Recessed lock-on button for continuous use
  • Reversing switch lever is conveniently located
  • Depth gauge for increased drilling consistency (country-specific)
  • 6.5 mm (1/4″) drill chuck engineered for positive bit retention
  • Double insulated