Cordless Upright Cleaner
18V X2 (36V) LXT BL Brushless Cordless 5 L HEPA Upright Cleaner
- High dust removal performance similar to corded upright cleaners
- Low noise mode allows for use in noise-sensitive environments such as office, hospital and more
- Two different BL motors, one for vacuuming dust and the other for rotating brushroll
- One-touch 3-suction mode selection switch with mode memory function
- 4-stage brushroll height adjustment
- HEPA Filter is used to capture very fine particles effectively
- Main body able to tilt up to 90 degrees enables to clean in tight spaces under furniture, sofa, bed and more
- Removable aluminum pipe with integrated handle for cleaning in corners or confined spaces
- Tool-less brushroll removal/installation for easy maintenance
- Dust disposal warning lamp/ Brushroll error lamp/ Battery capacity warning lamp
- Brushroll automatically stops when the machine is in the upright position
- LED job light with on/off switch is convenient for cleaning in dark places
- Battery cover protects the battery from dirt, dust and more
- Carrying handle located on the front bottom and back top of the main body
- 18V solution for corded power demands
- Two 18V LXT Li-Ion batteries & BL motors deliver the power and performance for corded demands without leaving the 18V LXT platform
- Two 18V LXT batteries & BL motors generate 1.9 m³/min of Max air flow / 12 kPa of Max sealed suction / 85 W of Suction power
- Delivers up to 120 min of run time using BL1860B
- 5L Large dust bag capacity enables continuous cleaning work. Front bumper protects wall and furniture surfaces from scratches/damages. Battery protection circuit protects against overloading, over-discharging and over-heating
Cordless Pole Saw
18V X2 (36V) LXT 30 cm (12″) Cordless Telescopic Pole Saw
- High power BL motor delivers the same or higher operation efficiency than 30 mL class engine models
- The chain speed is the same or higher than competing models, enabling comfortable cutting
- Torque boost mode raises the current limit temporarily for easy cutting of trunks or thick limbs
- Lightweight pole saw head for easy access to a desired cutting position and reduced operator fatigue
- Active Feedback sensing Technology (AFT) turns the motor off if rotation speed suddenly slows
- The same slim design as engine pole saws provides easy maneuverability into branches
- Telescopic extension pole adjustable in length from 2.5m to 3.8m provides extended reach
- Ideal for pruning and limbing in tall trees or hard-to-reach areas
- Two 18V LXT Li-Ion batteries deliver power and performance without leaving the 18V LXT platform
- Anti-fall captive nut to minimize loss of nuts when replacing guide bar or saw chain
- Retractable oil tank cap knob decreases the chance that the saw head will be snagged in branches
- Chain oil tank with high transparency allows to easily check the amount of remaining oil
- Integrated branch hook convenient for removing cut branches from trees
- Battery guard also can be used as an auxiliary grip
- Extreme Protection Technology (XPT) engineered to provide increased dust and water resistance
- Cordless for reduced maintenance; no need to change engine oil or spark plug, clean air filter or drain fuel for storage
- Instant start-up: simply load two 18V LXT batteries and the saw is ready to use
- Battery protection circuit protects against overloading, over-discharging and over-heating
Cordless Pole Saw
18V X2 (36V) LXT BL AFT 30 cm (12″) Cordless Pole Saw
- High power BL motor delivers the same or higher operation efficiency than 30 mL class engine models
- The chain speed is the same or higher than competing models, enabling comfortable cutting
- Torque boost mode raises the current limit temporarily for easy cutting of trunks or thick limbs
- Lightweight pole saw head for easy access to a desired cutting position and reduced operator fatigue
- Active Feedback sensing Technology (AFT) turns the motor off if rotation speed suddenly slows
- The same slim design as engine pole saws provides easy maneuverability into branches
- Two 18V LXT Li-Ion batteries deliver power and performance without leaving the 18V LXT platform
- Ideal for pruning and limbing in tall trees or hard-to-reach areas
- Anti-fall captive nut to minimize loss of nuts when replacing guide bar or saw chain
- Retractable oil tank cap knob decreases the chance that the saw head will be snagged in branches
- Chain oil tank with high transparency allows to easily check the amount of remaining oil
- Integrated branch hook convenient for removing cut branches from trees
- Battery guard also can be used as an auxiliary grip
- Extreme Protection Technology (XPT) engineered to provide increased dust and water resistance
- Cordless for reduced maintenance; no need to change engine oil or spark plug, clean air filter or drain fuel for storage
- Instant start-up: simply load two 18V LXT batteries and the saw is ready to use
- Battery protection circuit protects against overloading, over-discharging and over-heating
Cordless Angle Grinder
40Vmax XGT BL AFT Cordless 150 mm (6″) Angle Grinder, Anti-Restart Function, Electric Brake, Paddle Switch
- 40Vmax XGT Li-Ion battery and BL motor deliver sufficient power even to rotate a 150 mm wheel
- Improved heat dissipation capacity of the controller allows for continuous heavy-duty applications
- Genuine solution for high demand industrial applications
- New toolless wheel cover allows for fast and easy angle adjustment and installation/removal of wheel cover
- AFT (Active Feedback sensing Technology) turns the motor off if rotation speed suddenly slows or wheel is forced to stop
- Electric brake for maximum productivity
- BL motor delivers 8,500 RPM
- BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- BL motor is electronically controlled to optimize battery energy use for longer run time per charge
- BL motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Soft grip provides increased comfort on the job
- Slide switch with lock-on for operator convenience
- Soft start suppresses start-up reaction for smooth start-ups and longer gear life
- Spiral bevel gears for smoother rotations and a more efficient transfer of energy
- Anti-restart function engineered to minimize motor start up when battery is inserted with switch locked on
- XPT (eXtreme Protection Technology); For use in outdoor applications or harsh environments, protection from dust and dripping water is enhanced
- Side handle can be installed on either side of the tool for operator convenience. Wheel cover protects operator from accidental scattering of broken wheel or workpiece with minimal wheel cover movement. Spindle lock for easy wheel changes
Cordless Angle Grinder
40Vmax XGT BL AFT Cordless 150 mm (6″) Angle Grinder, Anti-Restart Function, Electric Brake, Slide Switch Lock-On
- 40Vmax XGT Li-Ion battery and BL motor deliver sufficient power even to rotate a 150 mm wheel
- Improved heat dissipation capacity of the controller allows for continuous heavy-duty applications
- Genuine solution for high demand industrial applications
- New toolless wheel cover allows for fast and easy angle adjustment and installation/removal of wheel cover
- AFT (Active Feedback sensing Technology) turns the motor off if rotation speed suddenly slows or wheel is forced to stop
- Electric brake for maximum productivity
- BL motor delivers 8,500 RPM
- BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- BL motor is electronically controlled to optimize battery energy use for longer run time per charge
- BL motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Soft grip provides increased comfort on the job
- Slide switch with lock-on for operator convenience
- Soft start suppresses start-up reaction for smooth start-ups and longer gear life
- Spiral bevel gears for smoother rotations and a more efficient transfer of energy
- Anti-restart function engineered to minimize motor start up when battery is inserted with switch locked on
- XPT (eXtreme Protection Technology); For use in outdoor applications or harsh environments, protection from dust and dripping water is enhanced
- Side handle can be installed on either side of the tool for operator convenience. Wheel cover protects operator from accidental scattering of broken wheel or workpiece with minimal wheel cover movement. Spindle lock for easy wheel changes
Combination Hammer
30 mm (1-3/16″) 3.9 J Combination Hammer, SDS-PLUS Bits
- Drilling efficiency drastically increased by redesigned hammering mechanism
- Anti-vibration side grip absorbs excess vibration beyond the canceling capacity of the two counterweights
- Anti-vibration rear handle; Vibration absorbing performance is increased by two cushion rings added to connecting parts
- Less bit wobbling achieved by making bit guide portion 8 mm longer than that of HR2811F series
- Powerful 1,050 W motor delivers 3.9 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications
- 3-mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only”
- “No hammering when idling” function helps increase tool life
- Torque limiting clutch engineered to minimize gear damage by automatically disengaging gears if the bit binds
- Ergonomic “D-shaped” handle with rubberized soft grip for increased comfort
- Variable speed control dial allows operator to adjust speed based on materials or application
- Constant speed control automatically applies additional power to the motor to maintain speed under load
- Recessed lock-on button for continuous operation
- Depth gauge for increased drilling consistency
- Double insulated
Combination Hammer
30 mm (1-3/16″) 3.9 J AVT Combination Hammer, SDS-PLUS Bits, LED Light
- Drilling efficiency drastically increased by redesigned hammering mechanism
- Anti-Vibration Technology (AVT) for low vibration
- Powerful yet with low vibration due to 2 Counterweights, Anti-vibration rear handle and Anti-vibration side grip yet maintaining high power
- Anti-vibration side grip absorbs excess vibration beyond the canceling capacity of the two counterweights
- Anti-vibration rear handle; Vibration absorbing performance is increased by two cushion rings added to connecting parts
- Less bit wobbling achieved by making bit guide portion 8 mm longer than that of HR2811F series
- Powerful 1,050 W motor delivers 3.9 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications
- LED light illuminates drilling surface for more productivity in low light applications
- 3-mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only”
- “No hammering when idling” function helps increase tool life
- Torque limiting clutch engineered to minimize gear damage by automatically disengaging gears if the bit binds
- Ergonomic “D-shaped” handle with rubberized soft grip for increased comfort
- Variable speed control dial allows operator to adjust speed based on materials or application
- Constant speed control automatically applies additional power to the motor to maintain speed under load
- Recessed lock-on button for continuous operation
- Depth gauge for increased drilling consistency
- Double insulated
Cordless Driver Drill
40Vmax XGT BL Brushless Cordless 13 mm (1/2″) 65 N·m (580 in.lbs.) Driver Drill
- Delivers higher drilling, driving and fastening speed than DDF484
- Increased maneuverability due to more compact design than DDF484
- Aluminum gear housing creates an impression of rigidity and luxuriousness
- Variable 2-speed (0-600 & 0-2,200 RPM) for a wide range of drilling and fastening applications
- Built-in twin LED lights with pre-glow and afterglow functions illuminate the work area
- BL motor delivers 65 N·m (580 in.lbs.) of max torque
- BL motor is electronically controlled to optimize battery energy use for longer run time per charge
- BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- BL motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Lightweight for reduced operator fatigue
- 21 clutch settings and drill mode for added fastening control
- Best possible ergonomic handle with soft grip for driver-drill applications
- All metal gear construction for extra-high transmission durability
- Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
- Convenient 13 mm (1/2″) keyless chuck for quick bit changes
- Battery protection circuit protects against overloading, over-discharging and over-heating
- Mechanical 2-speed gearing; High speed mode for speedy drilling in light duty applications; Low speed mode for heavy duty applications requiring high torque
- Electric brake for maximum productivity
- Reversing switch is conveniently located. Durable, reversible belt clip convenient for temporary tool hanging
Cordless Slide Compound Miter Saw
40Vmax XGT BL AWS Cordless 216 mm (8-1/2″) Slide Compound Miter Saw, LED Light
- More efficient dust extraction is achieved by using the appreciated mechanism of “Dual dust collection ports”, which is available in DLS111 series
- Redesigned blade case for reduced sawdust flying towards operator
- 40Vmax XGT Li-Ion battery enables LS002G to produce high output power, making the performance higher than competitors
- Switch to start up vacuum cleaner (via AWS) convenient for cleaning after working with this tool
- Rail-forward design enables to be placed against a wall for maximizing work space
- LED lamp to cast an exact cutting line
- Extendable sub tables help stabilize long material cuts
- Precision miter angle adjustment; Can be achieved simply by turning a knob on the turn base
- High precision cutting; Bevel cutting precision has been increased by optimizing the rigidity of each and every relevant part
- Easy locking and release of bevel angle; Bevel angle can be locked/released by turning the dial behind the front grip, which is located near operator
- Constant speed control as stable as that of AC tools
- Equipped with BL motor, allowing for smooth cutting
- Auto-start Wireless System (AWS) connects to compatible vacuum cleaners with Bluetooth
- Bevel range of 48° right and left
- Single sliding system enables smooth operation to produce superior cuts
- Front knob for easy bevel angle adjustment
- One-touch slide lock; Can be easily locked/unlocked by inserting/removing the lock pin
- Positive stop function can be disabled simply by depressing a lever
Cordless Driver Drill
18V Li-Ion Cordless 13 mm (1/2″) 38 N·m (340 in.lbs.) Driver Drill, G-Batter
- All metal gear construction ensures high transmission durability
- Mechanical 2-speed gearing; High speed mode for speedy drilling in light duty applications; Low speed mode for heavy duty applications requiring high torque
- Variable speed control dial enables user to match the speed to the application
- 16 clutch settings and drill mode for added fastening control
- Single sleeve keyless chuck allows for easy bit installation/removal with one hand
- Rubberized soft grip provides more control and reduced fatigue
- Compact and lightweight design for easy handling and high maneuverability
- Low noise level for improved user comfort
- Electric brake for maximum productivity and increased operator safety
- Reversing switch is conveniently located
- The G-series range from Makita is a different lithium-ion battery platform to the Makita LXT range of professional cordless power tools, and is powered exclusively by the G-series battery and DC18WA charger
- Produced to a quality far exceeding that of DIY products, the G-series range offers a comprehensive catalogue of tools at an attractive market price
- The G-Series battery is identifiable by the white or grey top section, and offers a 1.5 amp hour battery capacity in 18V platform
- A 60-minute charge time is achieved with the G-Series DC18WA battery charger
Cordless Multi Function Power Head
40Vmax XGT BL AFT Cordless Multi Function Power Head
- BL motor and the XGT battery deliver much higher power than the current model DUX60, and enables use in a wider range of applications
- WetGuard and IPX4; Excellent water-resistant performance
- Active Feedback sensing Technology (AFT) turns the motor off if rotation speed suddenly slows
- High/Medium/Low 3-speed selection and variable speed control by trigger
- Multi-tool system consisting of power head and versatile optional attachments is ideal for a wide range of applications
- BL motor with high power to weight and size ratio
- BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- BL motor is electronically controlled to optimize battery energy use for longer run time per charge
- BL motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Ergonomically designed new loop handle fits comfortably in user’s hand
- Variable speed control (high: 0 – 9,700, medium: 0 – 8,200, low: 0 – 5,700 RPM) allows the user to match speed to application
- Constant speed control maintains constant speed under load
- Soft start for smooth start-ups
- Electric brake stops the motor rotation gently but fast, allowing user to quickly resume operation
- Lever style lock system for quick toolless installation and replacement of the attachments
- Reverse switch for easy removal of grass clippings from the cutting tool
- Two-stage safety trigger switch minimizes accidental start up
- On-board blade wrench for convenience
- Shoulder harness for operator convenience. Handle and hanger position can be adjusted to obtain comfortable handling of the tool. Zero emissions and reduced maintenance; no need for gas or oil. The best choices for use in resorts, public places and residential areas. Battery protection circuit protects against overloading, over-discharging and over-heating
Wall Chaser
125 mm (5″) 1,400 W SJS Wall Chaser with Soft Start
- Clean, compact and comfortable
- Offers the most efficient cutting of clean edged grooves for channels
- Ergonomically designed handle for comfort
- Conveniently located front cover efficiently minimizes the dust from spreading, in every cutting depth
- SJS (Super Joint System) feature provides smooth and comfortable cutting by reducing the start up shock and protection from accidental wheel jam
- Constant Speed Control automatically applies additional power to the motor to maintain speed under load
- Soft start suppresses start-up reaction for more control and longer tool life
- Twin bladed
- Improved easy-to-pull two finger trigger switch
- 9 stage adjustbale cutting width and depth
- Aluminium blade case designed to allow for easy blade replacement
- Connectable to dust extraction systems
- Double insulated
