Cordless Lawn Mower
40Vmax XGT BL Cordless 43 cm (17″) Lawn Mower
- Higher mowing performance; the blade is designed to tilt down towards the front of the mower when attached, minimizing double-cutting to reduce the load on the machine for reduced energy consumption, better feeling of cutting and improved grass collecting performance
- Warning lamp for Battery capacity, High temperature and Overload
- Less force required to turn on the mower; Reduction in user fatigue has been achieved by redesigning the shape of switch lever and the specification of spring to reduce the force required to pull switch lever to turn on the mower
- Easy-to-operate handle lock levers;
• each side of the handle can be locked/unlocked with just a single action without tool
• allows for easier folding of handle when storing the mower
- Easier cutting height adjustment;
• Easy-to-grip egg-shaped lever top
• U-shaped notches, which provide positive stops for lever, can be visually checked, making it easy to adjust cutting height
- XPT (eXtreme Protection Technology)/IPX4-compatible
- Water-resistant cutting deck; The inside is washable; however, must not be washed with high-pressure water
- New two different blades available for different applications
• 2-tooth bar blade;
– Standard blade for both grass collection and mulching
– Features Improved grass collecting performance achieved by redesigning blade tips to increase air flow volume
• Mulching blade;
– Cuts grass clippings into small particles and scatters them evenly on the ground for mulching
– Ensures proper air flow volume required for mixing grass clippings in the deck
- Grass catcher with plastic lid designed for compact upright storage with the mower body
- Upright storage for space saving
Cordless Lawn Mower
40Vmax XGT BL Cordless 38 cm (15″) Lawn Mower
- LM003G has been developed based on DLM382, and are easy-to-use due to the use of a single battery, featuring improved mowing performance, grass collection performance
and maneuverability
- Higher mowing performance; the blade is designed to tilt down towards the front of the mower when attached, minimizing double-cutting to reduce the load on the machine for reduced energy consumption, better feeling of cutting and improved grass collecting performance
- Warning lamp for Battery capacity, High temperature and Overload
- Less force required to turn on the mower; Reduction in user fatigue has been achieved by redesigning the shape of switch lever and the specification of spring to reduce the force required to pull switch lever to turn on the mower
- Easy-to-operate handle lock levers;
• each side of the handle can be locked/unlocked with just a single action without tool
• allows for easier folding of handle when storing the mower
- Easier cutting height adjustment;
• Easy-to-grip egg-shaped lever top
• U-shaped notches, which provide positive stops for lever, can be visually checked, making it easy to adjust cutting height
- XPT (eXtreme Protection Technology)/IPX4-compatible
- Water-resistant cutting deck; The inside is washable; however, must not be washed with high-pressure water
Slide Compound Miter Saw
216mm (8-1/2″) Slide Compound Miter Saw, LED Job Light with Cut Line Guide Function
- High cutting capacity and dust extraction rate and developed for high cost-competitiveness compared with LS0815 series
- Improved cost competitiveness achieved by redesigning the specifications to suit target users and applications
- Cuts up to 305 mm (12”) at 90° and 215 mm (8-1/2”) at 45°
- High dust extraction rate – Connects directly to Makita vacuum cleaner for a cleaner work area
- Powerful direct drive motor requires less maintenance and delivers 5,000 RPM
- LED job light with cut line guide function;
– LED job light casts a shadow of the saw blade onto the workpiece as an exact cutting line
– By aligning the shadow with the ink line on the workpiece, you can make an exact cut
- Slide style sub fence (left side only) can be pulled out for more stable cutting of wide workpiece
- Soft start feature for smooth start-ups
- Carrying handle for easy transportation to job site
- Double insulated for operator safety.
- Ideal for baseboard and crown molding installation, finish carpenters, cabinet and furniture makers, wood floor installers, deck builders, general construction and more
Battery Heated Base Layer Shirt
18V/14.4V LXT / 12Vmax CXT Battery Heated Base Layer Shirt, Half-Zip (Stand-Up Collar) Style
- Battery heated base layer shirt for wearing between your underwear and over clothes
- Powered by the following batteries: 14.4V/18V LXT battery, 12Vmax CXT battery, thin type battery BL1055B
- Comfortable to wear:
∙ Fabric is very thin, allowing you to wear between your underwear and over clothes
∙ Elastic fabric material provides movement without restrictions
- Four heat zones on the front waist, back top center and both forearms
∙ Two forearm heat zones are newly added to provide more effective heating of a wide area of upper body and arms
- Ideal not only for conventional power tool/OPE users, but for a wider range of users regardless of indoor or outdoor, such as factory workers, sports spectators, amateur anglers and more
- Machine-washable and -dryable
- With 3 heat level settings
- Compatible battery holder
• Compatible with Battery holders (TD00000110/ TD00000111), which are also compatible with fan-cooling items
• Not compatible with Battery holders (YL00000003/ YL00000004), which are specially designed for heated items
- Ideal place for holding Battery BL1055B
Battery BL1055B can be held in the pocket on the left side waist of the shirt, enabling user to sit back at ease
- Unisex shirt
• Wearable regardless of gender
• Available in XS size, a brand-new size in the lineup of our fan-cooling or heated wear
Cordless Driver Drill
10.8V (12V max) Li-Ion Cordless 6.35 mm (1/4″) Hex 22 N·m (200 in.lbs.) Driver Drill
- Lightweight and compact but with 2-speed gear selection
- Ergonomically designed handle shape for comfortable gripping
- LED job light with after glow function
- High operation efficiency with 10.8V Li-ion battery
- 18 clutch settings and drill mode for added fastening control
- Single sleeve 10mm keyless chuck
- Variable speed control by trigger for precise fastening in a wide variety of applications
- Electric brake
- Reversing switch
Cordless High Pressure Washer
Cordless High Pressure Washer powered by 40Vmax XGT Li-Ion battery
- Cordless High Pressure Washer powered by 40Vmax XGT Li-Ion battery (two in parallel or one)
- High washing power similar to that of corded models
- Good mobility and transportability
- High washing power; very good balance between high discharge pressure and high flow rate (in mode 3) similar to that of HW0820.
- 3 operation modes; operation mode can be selected to suit the contamination degree of the object to be cleaned
- Telescopic handle for easy transportation and storage
- Large diameter wheels; equipped with 140mm diameter wheels, allowing for good mobility even on bumpy road surfaces.
- Self-priming function:
• Water can be supplied not only from faucet but also from water reservoirs, such as poly tanks, large buckets, using this function
• Max suction height: 1m
• Minimal water level: 15mm
• No need to operate air drain valve
- New foam nozzle features a foaming mesh newly added to improve the foaming performance of detergent
- WetGuard/IPX5-compatible
Cordless Pruning Saw
18V LXT BL Cordless 150 mm (6″) Pruning Saw
- Easy-to-use, lightweight and compact product enables easy pruning of garden or orchard trees
- New tool-less change and tension adjustment of saw chain
• Simply loosen and re-tighten the lever to automatically adjust the tension of saw chain
• This easy-to-operate large lever is designed to be pulled up and turned easily
- Automatic chain lubrication minimizes the chance that saw chain will stall due to forgetting to supply chain oil
- Compact and lightweight BL motor for higher efficiency in operation
- Lock-off lever accessible from both sides
- Rear hand guard
- Movable guard covers the upper side of guide bar, and opens gradually wider as saw chain cuts deeper in branch
- Saw chain: 80TXL 150mm
- Chain oil view window allows operator to easily check oil level
- Soft grip handle for non-skid operation
- Electric brake for maximum productivity
- Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
- Battery protection circuit protects against overloading, over-discharging and over-heating
Cordless Hammer Driver Drill
18V Li-Ion Cordless 13 mm (1/2″) 38 N·m (340 in.lbs.) Hammer Driver Drill, G-Battery
- 18V Li-Ion Cordless 13 mm (1/2″) 38 N·m (340 in.lbs.) Hammer Driver Drill, G-Battery
- All metal gear construction ensures high transmission durability
- Mechanical 2-speed gearing; High speed mode for speedy drilling in light duty applications; Low speed mode for heavy duty applications requiring high torque
- Variable speed control dial enables user to match the speed to the application
- 16 clutch settings and drill mode for added fastening control
- Single sleeve keyless chuck allows for easy bit installation/removal with one hand
- Rubberized soft grip provides more control and reduced fatigue
- Compact and lightweight design for easy handling and high maneuverability
- Low noise level for improved user comfort
- Electric brake for maximum productivity and increased operator safety
- Reversing switch is conveniently located
- The G-series range from Makita is a different lithium-ion battery platform to the Makita LXT range of professional cordless power tools, and is powered exclusively by the G-series battery and DC18WA charger
- Produced to a quality far exceeding that of DIY products, the G-series range offers a comprehensive catalogue of tools at an attractive market price
- The G-Series battery is identifiable by the white or grey top section, and offers a 1.5 amp hour battery capacity in 18V platform
- A 60-minute charge time is achieved with the G-Series DC18WA battery charger
Cordless Compact Cut Off
18V LXT BL AFT Cordless 76 mm (3″) Compact Cut Off
- Developed mainly for automotive repair shops, plumbing traders and air conditioning equipment suppliers, and designed to have enough power and compactness for enabling small jobs, such as cutting thin sheet metals, pipes, etc.
- 76mm (3″) cutter suitable for small cutting jobs
• Enough cutting depth for cutting thin sheet metals, pipes, etc.
• Easy-to-grip small diameter grip for more comfort and control
• Equipped with Reverse switch, enabling to deflect sparks and dust according to working situation
• Compatible with Dust collect cover attachment for connection to vacuum cleaner, helping keep a job site clean
- Compact and well balanced for increased maneuverability
- Single LED job light with afterglow function illuminate cutting surface for more productivity in low light applications, also used as overload display (Overload will be notified by blinking)
- BL motor with high power to weight and size ratio
- AFT (Active Feedback sensing Technology) for kickback reduction
- eXtreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
- Anti-restart function engineered to minimize motor start up when battery is inserted with switch locked on
- Lock-off function prevents accidental start up
- Trigger swicth
- Electric brake for maximum productivity
- Dust collect cover attachment can be attached directly to Wheel cover
Cordless Earth Auger
18V X2 (36V) LXT BL ADT Cordless Earth Auger
- 18V X2 (36V) LXT BL ADT Cordless Earth Auger
- Auger bit is directly attached
- Reversing switch enables to extract, in reverse rotation mode, an auger bit jammed in soil with high resistance like clay soil
- Powered by two 18V LXT batteries in series
- Automatic torque Drive Technology (ADT) adjusts speed and torque during operation for optimum performance
- BL motor delivers 1,500 RPM
- Variable 2-speed for increased drilling versatility
- Built-in clutch reduces gear damage by automatically disengaging gears if the bit binds
- Twin LED lights with preglow and afterglow feature illuminate the work area
- Soft start for smooth start-ups
- Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
- Electric brake for increased productivity
- Main power switch with auto power-off function
Cordless Jig Saw
40Vmax XGT BL Cordless Barrel Handle Jig Saw, 3 Orbital Settings plus Straight Cutting, Twin LED Lights
- More efficient than our existing AC and DC models, allowing for smooth and efficient cutting of 48 mm thick MDF
- Higher user-friendliness has been achieved by adding light reduction function, redesigning tool body shape and more
- XGT technology and constant speed control reduce the chance of drop in cutting speed even during heavy duty applications such as cutting 48 mm thick MDF, providing improved cutting performance
- High power tool, yet with a barrel handle, which provides easier tool handling due to the same ease-to-grip as DJV181 and a tool overall length shorter than the LXT model achieved by redesigning the shape of inside parts
- LED job light (Twin LEDs with light up function during standby mode)
- 3 Orbital settings + Straight cutting
- Toolless blade clamp (with a blade holder which allows for one-hand blade change)
- Variable speed control by dial
- BL motor delivers high power
- Soft start allows for accurate landing of the blade on the surface of the workpiece
- Ergonomically designed handle with soft grip
- Dust nozzle can be attached for connection to Makita vacuum cleaner
- Electric brake for increased productivity
- Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
- Battery protection circuit protects against overloading, over-discharging and over-heating
Cordless Driver Drill
18V LXT BL Cordless 13 mm (1/2″) 110 N·m (970 in.lbs.) Driver Drill
- 18V LXT BL Cordless 13 mm (1/2″) 110 N·m (970 in.lbs.) Driver Drill
- Excellent drilling capacity: Drilling in 2x lumber with up to 1″ ship auger bit in high speed mode
- Robust keyless drill chuck with single metal sleeve
- Metal gear housing
- Excellent maneuverability
Despite increased efficiency, the overall length is shorter than that of our current model due to optimally redesigned gear assembly
- Variable 2-speed for a wide range of drilling and fastening applications
- Built-in twin LED light with pre-glow and afterglow functions illuminates the work area
- Convenient 13 mm (1/2″) keyless chuck for quick bit changes
- 21 clutch settings and drill mode for added fastening control
- Mechanical 2-speed gearing; High speed mode for speedy drilling in light duty applications; Low speed mode for heavy duty applications requiring high torque
- Electric brake for maximum productivity
- Reversing switch is conveniently located
- Durable, reversible belt clip convenient for temporary tool hanging
- Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
- Battery protection circuit protects against overloading, over-discharging and over-heating
