DP4020

Drill

13 mm (1/2″) 630 W Variable Speed Reversing Drill with Keyed Chuck

  • 13 mm (1/2″) 630 W Variable Speed Reversing Drill with Keyed Chuck
  • This model is 13mm (1/2″) Drill mainly targeting metal drilling operations. We have refined the specifications of the motor of 6412 and achieved the performance equal or superior to competitors’ models.
  • Continuous rating input: 630W We have achieved the performance equal or superior to competitors’ models in heavy-duty applications such as drilling into metal, by adopting an enhanced motor with the same diameter and longer length and increasing the continuous rating input compared with 6412/6407 series.
  • Longer carbon brush life Longer carbon brush life compared with 6412/6413 has been achieved by adopting Brush holder unit.
  • Increased durability against wobbling spindle The durability of the bearing section has been increased during drilling (such as drilling into metal) where the spindle tends to wobble, by adopting a metal bearing bracket.
  • Keyed drill chuck
  • Variable speed (0 – 3,000 RPM) for drilling in a wide variety of materials
  • Forward/Reverse switch for easy switching between operating modes
  • Ergonomically designed grip provides more control and comfort
  • Chuck capacity: 1.5 – 13 mm (1/16 – 1/2″)
  • Lock-on Button for continuous operation
  • Double insulated

AT638A

Narrow Crown Stapler

18 GA 38 mm (1-1/2″) Narrow Crown Stapler, Air Duster

  • Conveniently located push button type air duster for continuous operation
  • Protective bumpers protect workpiece and body from scratches/damage
  • High power of max air pressure 0.83 MPa (120 PSI) provides secure fastening of flooring point
  • Toolless driving depth adjustment simply by turning a dial
  • Large fastener capacity of 100 nails for fewer reloads and less downtime
  • Ergonomically designed rubber grip with anti-slipping rib provides more comfort and better control
  • Drives 18 GA staples with 5.7 mm crown from 13-38 mm (1/2″-1-1/2″) length
  • Operable in either way of “bump fire mode (contact actuation mode)” or “(single) sequential actuation mode”
  • Bump fire mode (contact actuation mode) drives staples repetitively for quick operation
  • (Single) sequential actuation mode drives one staple by one sequential operation
  • Clear window allows operator to see number of remaining staples
  • Toolless nail jam clearing
  • Easy-to-see slim nose tip allows quick and easy access to a desired fastening point
  • Nose adapter for minimizing workpiece surface from being scratched or damaged
  • Empty indicator turns to red when the remaining number of nails in the magazine becomes low
  • Lightweight for reduced operator fatigue
  • Hook convenient for temporary tool hanging
  • Typical applications include: Fixing mouldings, cabinet work, panelling, carpet underlay, craft work

DPT353

Cordless Pin Nailer

18V LXT Li-Ion Cordless 23 GA 35 mm (1-3/8″) Pin Nailer

  • 18V LXT Li-Ion Cordless 23 GA 35 mm (1-3/8″) Pin Nailer
  • Low Reaction Force Mechanism Enables Easier Long Pin Nailing and High-Quality Finish
  • Easy-to-see slim nose tip allows quick and easy access to a desired fastening point
  • Nails can be fired in the groove of baseboard
  • Shoots 6,400 nails on a single full BL1860B charge
  • Contact arm mechanism enables “continuous nailing” and “drag nailing”
  • Contact trigger for improved accuracy and precision
  • Drives 5 different lengths of 23 gauge pin nails (15 mm (5/8″), 18 mm (11/16″), 25 mm (1″), 30 mm (1-3/16″) and 35 mm (1-3/8″)); magazine capacity up to 120 nails
  • Anti-dry fire mechanism engineered to minimize driving blanks and damage to work surface
  • Toolless depth adjustment for precise flush and countersink finish
  • Built-in LED light illuminates the work area
  • Ergonomically designed handle with soft grip provides increased comfort
  • Spring-loaded driving mechanism allows for a compact tool with light weight
  • Battery fuel gauge indicates battery charge level
  • Nose adapter for driving pin nails on delicate surfaces
  • Trigger-lock button minimizes accidental start up
  • Sight window for checking the amount of remaining pin nails
  • Onboard hex wrench for keeping it from lost
  • Battery protection circuit protects against overloading, over-discharging and over-heating
  • Durable, reversible belt clip convenient for temporary tool hanging. Cordless for increased convenience; eliminates the need for a compressor and air hose.

DRT52

Cordless Trimmer

18V LXT BL Brushless Cordless 6 / – mm (- / 1/4″) Trimmer

  • 18V LXT BL Brushless Cordless 6 / – mm (- / 1/4″) Trimmer
  • BL motor provides output efficiency similar or superior to that of the corded models 3709/3711
  • The same simple specifications as models 3709/3711, improving cost competitiveness and targeting the market in emerging countries
  • Equipped with Lock/unlock button (for off/on of Standby mode), which minimizes the chance of unexpected start-up of the tool, and Power switch as with DRT50
  • LED lamp for indication of being unlocked (= in standby mode) The LED lamp lights up solid to indicate that the tool is unlocked and now in Standby mode while the tool is unlocked
  • Soft start function minimizes start-up shock and makes the tool start smoothly
  • Compatible with XPT (eXtreme Protection Technology)
  • Material of Housing: Plastic
  • Material of Base: Plastic
  • Collet size: 6mm, 1/4″

GA9090

Angle Grinder

230 mm (9″) 2,200 W Angle Grinder, Large Trigger Switch

  • 230 mm (9″) 2,200 W Angle Grinder, Large Trigger Switch
  • This model, targeting metal grinding operations, has achieved similar durability as GA9020, while improving cost competitiveness and realizing a lightweight and compact design
  • Cost-competitiveness / Compact and lightweight This model is a lightweight and compact 2,200W angle grinder with an N94 motor and has achieved weight reduction in the gear housing, etc.
  • Excellent maneuverability The side grip can be attached closer to the center of the wheel rotation to reduce the load on the user’s hand for improved maneuverability in grinding operation
  • Reduced core abrasion (Stator) core abrasion is reduced by adding a water absorption process to the nylon motor housing after molding to reduce dimensional changes of the housing in humid conditions
  • Improved leakage resistance Switch cover and Sponge are added to improve leakage current resistance between switch terminals
  • Serial number label protection The serial number label is placed in a position hidden by the wheel cover to protect the label
  • Three-position adjustable side grip for operator convenience
  • Double insulation

GA7090

Angle Grinder

180 mm (7″) 2,200 W Angle Grinder, Large Trigger Switch

  • 180 mm (7″) 2,200 W Angle Grinder, Large Trigger Switch
  • This model, targeting metal grinding operations, has achieved similar durability as GA7020, while improving cost competitiveness and realizing a lightweight and compact design
  • Cost-competitiveness / Compact and lightweight This model is a lightweight and compact 2,200W angle grinder with an N94 motor and has achieved weight reduction in the gear housing, etc.
  • Excellent maneuverability The side grip can be attached closer to the center of the wheel rotation to reduce the load on the user’s hand for improved maneuverability in grinding operation
  • Reduced core abrasion (Stator) core abrasion is reduced by adding a water absorption process to the nylon motor housing after molding to reduce dimensional changes of the housing in humid conditions
  • Improved leakage resistance Switch cover and Sponge are added to improve leakage current resistance between switch terminals
  • Serial number label protection The serial number label is placed in a position hidden by the wheel cover to protect the label
  • Three-position adjustable side grip for operator convenience
  • Double insulation