Cordless Circular Saw
40Vmax XGT BL AWS Cordless 415 mm (16-5/16″) Circular Saw, Electric Brake, Soft Start
- This model has been developed based on model 5402NA, and with the adoption of an XGT battery and a BL motor, the tool has achieved high power similar to or superior to corded models, allowing for cutting through beams and sleepers with a thickness of up to 150mm in a single stroke.
- High-power cutting of 6x timbers
• The largest cordless circular saw in the world (As of August 2024)
• Power similar to or superior to model 5402NA or competitors’ corded models has been achieved by higher voltage with an XGT battery and adopting a BL motor (BL68-30) and EFFICUT saw blade.
- Lightweight design and enhanced maneuverability
• The motor housing material has been changed from aluminum to resin, resulting in a weight reduction of 1.5kg compared with model 5402NA when a BL4050F battery is installed. (This reduction has been achieved without compromising rigidity, ensuring the durability similar or superior to the current model.)
• With the adoption of a BL motor, the width has been reduced by 65mm compared with model 5402NA, enhancing stability and maneuverability during blade changes.
- Max cutting capacity: 158mm
- Protect stand
• The resin stand allows for storage without damaging the tool.
• Stabilizing the stand by pressing down the recessed portion with a foot allows for easy removal of the tool from storage.
• The tool can be temporarily placed at an angle for easy access to the tool without bending over.
- Auto-start Wireless System (AWS) connects to compatible vacuum cleaners with Bluetooth
- High water-resistance compatible with XPT (eXtreme Protection Technology)
- Bevel capacity: 0 – 45 degrees
- Right-side saw blade position
- Equipped with electric brake
- Soft start suppresses start-up reaction for more control and better accuracy
- Anti-restart function minimizes accidental start-up
Wide Crown Stapler
16 Ga 25 mm (1″) Wide Crown Stapler
- 16 Ga 25 mm (1″) Wide Crown Stapler
- Lightweight design for comfort and control
- Depth adjustment engineered for more precise flush and countersink finish
- Quick release cam-lock opens nose assembly to clear jammed staples, minimizing downtime
- Built-in air filter minimizes dust and debris from entering tool
- Ideal for lathing, roofing and sheathing
- Top-loading magazine allows operator to quickly load 16 gauge, 25 mm (1″) wide crown staples from 25 mm (1″) to 50 mm (2″) in length
- Rugged aluminum magazine has large holding capacity (up to 140 staples)
- Rubber bumpers protect the tool and surface from damage
- Compact with less weight for all day use
- Multi-directional exhaust port directs exhaust air away from operator
- Rubberized handle for better fit and added comfort
- Hook allows tool to remain close by but never in the way
Cordless Pruning Saw
40Vmax XGT BL Cordless 150 mm (6″) Pruning Saw
- Overview:
The UC029G is a cordless pruning saw powered by a 40Vmax XGT battery, suitable for cutting tasks such as pruning shrubs and small branches, as well as tree care. The 40Vmax XGT battery and high-power BL motor deliver strong and consistent power for your various wood-cutting tasks. With its lightweight and compact body, the tool offers excellent maneuverability, making it suitable for operations in confined spaces.
The saw chain can be adjusted and changed without tools, and the chain oil is automatically lubricated, making maintenance quick and easy. The tool is equipped with a retractable guard that covers the upper side of the guide bar, and an electric brake that stops the motor for user protection. The rear hand guard, positioned in front of the grip, protects the user’s hand.
- Tool-less change and tension adjustment of the saw chain
• Simply loosen and re-tighten the lever to automatically adjust the tension of saw chain
• The easy-to-operate large lever is designed to be pulled up and turned easily
- A hook with quick attachment/detachment (Optional accessory)
A hook allowing the tool to be attached and detached with one hand to a carabiner or similar.
- Automatic chain lubrication minimizes the chance of saw chain stalling due to a lack of chain oil
- Chain oil view window allows operator to easily check oil level
- Retractable oil tank cap knob
- Lock-off lever accessible from both sides
- Retractable guard covers the upper side of the guide bar, and opens gradually as the saw chain cuts deeper into the branch
- Rear hand guard, positioned in front of the grip, protects the user’s hand
- Electric brake that stops the motor for user protection
- Ergonomic soft grip for non-skid operation
- High water-resistance compatible with XPT (eXtreme Protection Technology)
- Battery protection circuit protects against overloading, over-discharging and over-heating
Cordless Angle Impact Driver
18V LXT Li-Ion Cordless 60 N·m (530 in.lbs.) Angle Impact Driver
- 18V LXT Li-Ion Cordless 60 N·m (530 in.lbs.) Angle Impact Driver
- Compact right angle impact driver for fastening and loosening in tight spaces
- Makita built motor and impact mechanism produces 60 N·m (530 in.lbs.) of maximum torque and 0-3,000 IPM
- Variable speed (0-2,000 RPM) for a range of applications from auto repair to cabinet installation
- Large conveniently located paddle switch for comfortable operation
- Over one foot of tool extension for extra reach into deep tight spaces
- LED light with afterglow feature illuminates the work area
- Soft grip handle provides increased comfort on the job
- Compact angled head for easy access in confined spaces
- Machined aluminum head for added durability
- 360 degrees rotatable head enables operation from optimum angle
- Convenient 6.35 mm (1/4″) hex chuck for quick bit change
- Conveniently located forward/reverse switch
- Convenient belt clip mounts on either side of the tool
- Phosphorescent bumper ring for locating tool in dark work areas
- Battery protection circuit protects against overloading, over-discharging and over-heating
Medium Crown Stapler
16 Ga 11 mm (7/16″) Medium Crown Stapler
- 16 Ga 11 mm (7/16″) Medium Crown Stapler.
- Clear jammed nails easily with cam-lock.
- Ideal for crating, decking, insulation, and sheathing applications.
- Depth adjustment engineered for more precise flush and countersink stapling.
- Quick release cam-lock opens nose assembly to clear jammed staples, minimizing downtime.
- Built-in air filter minimizes dust and debris from entering tool.
- Top-loading magazine allows user to quickly load 16 GA 11 mm (7/16″) staples varying in length from 25 mm (1″) to 50 mm (2″).
- Multi-directional exhaust port directs exhaust air away from operator.
- Compact with less weight for all day use.
- Hook allows tool to remain close by but never in the way.
- Rugged aluminum magazine has large holding capacity (up to 140 staples).
- Rubber bumpers protect the tool and surface from damage.
- Rubberized handle for better fit and added comfort.
Cordless Scarifier
40Vmax XGT BL Cordless 380mm (15″) Scarifier
- UV001G has been developed intended for thatching*1 and vertical cutting*2, both of which are essential for lawn maintenance, and designed to provide a working width of 380mm and a working depth of 12mm
*1 For removing deposited lawn clippings, generated moss, etc.
*2 For cutting through old roots for healthy lawn, etc.
- Powered by 40Vmax XGT Li-Ion battery (two in parallel or one)
- Automatic battery switching; If two batteries are installed and one battery in use has run out of power, the battery system automatically switches to the other one
(No special operation, such as on/off operation, is required)
- XPT (eXtreme Protection Technology)/IPX4-compatible
- Battery capacity warning lamp
• One red light for each of the two lights
• Blinks in red when the battery capacity decreases to 20% or less of full charge
• Lights up in solid red when the battery cannot discharge
- Toolless handle height adjustment (2 stages); Handle height can be adjusted without tool simply by pulling spring type Lock pin to release the lock (the same mechanism as that of DLM539)
- Grass catcher capacity: 50L
- Large Front/Rear tires with wheel diameter of 180/180mm; The same size Front/Rear tires provide an excellent balance of stable running performance (with front tires) and high turning performance (with rear tires)
- Water-resistant cutting deck; The inside is washable; however, must not be washed with high-pressure water
- Dial style working depth adjustment
• Fine adjustment of working depth can be made by operating a dial, allowing for adjustment of working depth to suit the environment for lawn growth and wear of blade
• The dial clicks in place every increment of 1mm depth
- Two different blades available for different applications
• Vertical cutter; For cutting through old roots for healthy lawn and cutting through thatch and soil for improved penetration of water and air
• Thatching blade; For removing deposited lawn clippings, generated moss, etc.
- Highly durable vertical cutter
• Blunt angled blade tip slows blade wear to minimize the reduction in working depth
• The slow wear reduces blade change frequency and running cost
- Low vibration; The blades of Vertical cutter are arranged symmetrically about the left-right center line of the rotary blade shaft to provide balanced rotation for reduced vibration
Cordless Oil-Pulse Driver
18V LXT BL Brushless Cordless Oil-Pulse Driver
- Extra compact (136mm) and lightweight thanks to the newly-developed oil unit and BL motor
- Incredibly low noise operation thanks to the impact mechanism using oil unit instead of anvil and hammer
- “T” mode: Tightening mode for self-drilling screw and bolts
- With the cooling system for oil unit, capable of long continuous operation
- BL motor with high power to weight and size ratio
- BL motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- BL motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Features Extreme Protection Technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions
- Built-in LED light with pre-glow and afterglow functions illuminates the work area
- Variable speed control by trigger for precise fastening in a wide variety of applications
- Low noise level of 77dB compared to other Mobile Impact Drivers
- Convenient one-touch 6.35 mm (1/4″) hex chuck for quick bit changes (country-specific)
- Electronic 3 stage impact power selection
- Phosphorescent bumper glows in dark places
- Battery fuel gauge indicates battery charge level
- Durable, reversible belt clip convenient for temporary tool hanging
Angle Grinder
125 mm (5″) 1,400 W SJS II Variable Speed Angle Grinder, Anti-Restart Function, Soft Start, Slide Switch
- 125 mm (5″) 1,400 W SJS II Variable Speed Angle Grinder, Anti-Restart Function, Soft Start, Slide Switch
- SJS II (Super Joint System II) provides increased machine durability by absorbing vibration
- Electronic current limiter for overload protection
- Anti-restart function minimizes accidental start-up
- Re-designed durable gear housing for enhanced shaft locking mechanism
- Ergonomically best possible barrel grip with perfect circumference, size and shape fits the users hand for extra comfortable handling
- Constant speed control maintains constant speed under load
- Soft start for smooth start-ups
- Connectable to Makita vacuum cleaner with optional dust collecting wheel guard
- Spiral bevel gears for smoother rotations and a more efficient transfer of energy
- Push button spindle lock for operator convenience
- Wheel cover protects operator from accidental scattering of broken wheel or workpiece with minimal wheel cover movement
- Double insulated
Cordless Angle Grinder
18V LXT BL ADT AFT Cordless 100 mm (4″) Angle Grinder, Anti-Restart Function, Slide Switch Lock-On
- 18V LXT BL ADT AFT Cordless 100 mm (4″) Angle Grinder, Anti-Restart Function, Slide Switch Lock-On
- Outperforming performance and efficiency for heavy-duty grinding applications
- World’s first cordless grinder with ADT (Automatic Torque Drive Technology) adjusts speed and torque during operation for optimum performance
- AFT (Active Feedback Sensing Technology) turns the motor off if rotation speed suddenly slows or wheel is forced to stop
- BL motor delivers 8,500 RPM
- BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- BL motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- BL motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Compact and ergonomic design at only 362mm long
- Lightweight for reduced operator fatigue
- Soft grip provides increased comfort on the job
- Slide switch with lock-on for operator convenience
- 3-Stage LED gauge indicates battery charge level / overheating / overload
- Soft start suppresses start-up reaction for smooth start-ups and longer gear life
- Spiral bevel gears for smoother rotations and a more efficient transfer of energy
- Anti-restart function engineered to minimize motor start up when battery is inserted with switch locked on
- Efficient internal cooling is engineered for optimum performance
- Wire mesh intake covers are engineered to minimize debris from entering motor
- Battery protection circuit protects against overloading, over-discharging and over-heating
- Water-resistance compatible with XPT
Side handle can be installed on either side of the tool for operator convenience.
Wheel cover protects operator from accidental scattering of broken wheel or workpiece with minimal wheel cover movement.
Spindle lock for easy wheel changes.
Gear housing can be rotated to suit most cutting and grinding applications.
Can be connected to dust extraction system with optional dust-collecting wheel cover
