UV001G

Cordless Scarifier

40Vmax XGT BL Cordless 380mm (15″) Scarifier

• UV001G has been developed intended for thatching*1 and vertical cutting*2, both of which are essential for lawn maintenance, and designed to provide a working width of 380mm and a working depth of 12mm
  *1 For removing deposited lawn clippings, generated moss, etc.
  *2 For cutting through old roots for healthy lawn, etc.
• Powered by 40Vmax XGT Li-Ion battery (two in parallel or one)
• Automatic battery switching; If two batteries are installed and one battery in use has run out of power, the battery system automatically switches to the other one
  (No special operation, such as on/off operation, is required)
• XPT (eXtreme Protection Technology)/IPX4-compatible
• Battery capacity warning lamp
  • One red light for each of the two lights
  • Blinks in red when the battery capacity decreases to 20% or less of full charge
  • Lights up in solid red when the battery cannot discharge
• Toolless handle height adjustment (2 stages); Handle height can be adjusted without tool simply by pulling spring type Lock pin to release the lock (the same mechanism as that of DLM539)
• Grass catcher capacity: 50L
• Large Front/Rear tires with wheel diameter of 180/180mm; The same size Front/Rear tires provide an excellent balance of stable running performance (with front tires) and high turning performance (with rear tires)
• Water-resistant cutting deck; The inside is washable; however, must not be washed with high-pressure water
• Dial style working depth adjustment
  • Fine adjustment of working depth can be made by operating a dial, allowing for adjustment of working depth to suit the environment for lawn growth and wear of blade
  • The dial clicks in place every increment of 1mm depth
• Two different blades available for different applications
  • Vertical cutter; For cutting through old roots for healthy lawn and cutting through thatch and soil for improved penetration of water and air
  • Thatching blade; For removing deposited lawn clippings, generated moss, etc.
• Highly durable vertical cutter
  • Blunt angled blade tip slows blade wear to minimize the reduction in working depth
  • The slow wear reduces blade change frequency and running cost
• Low vibration; The blades of Vertical cutter are arranged symmetrically about the left-right center line of the rotary blade shaft to provide balanced rotation for reduced vibration