Cutter
110 mm (4-3/8″) 1,200 W Cutter, Dry / Wet Type (country-specific)
- High performance and durability at less expense
- Ergonomically designed handle fits your hand perfectly to provide maximum comfort and control
- Powerful 1,200 W motor delivers 13,000 RPM
- Redesigned base with grooved back surface for smoother operation
- Compact and lightweight for less operator fatigue
- Easy alignment of base end with the cutting line on workpiece
- Water supply fixture can be mounted
- On-tool hex wrench for fast and easy blade changes and keeping it from lost
- Specialized for right angle cutting only
- Flat rear end is convenient for replacing the diamond wheel
- Cuts up to 32 mm (1-1/4″)
- Can be used with wet or dry type wheels (country-specific)
- Easy to adjust depth gauge for precision cutting
- Large top handle design for increased comfort
- Lock-off button helps prevent accidental starts (for tool with lock-off button)
- Lock-on button for continuous use operation (for tool with lock-on button)
- Screw and nut construction for high repairability
- Double insulated
- Externally accessible brushes for greater serviceability
Cutter
110 mm (4-3/8″) 1,200 W Cutter, Dry / Wet Type (country-specific)
- High performance and durability at less expense
- Powerful 1,200 W motor delivers 13,800 RPM
- Cuts up to 32 mm (1-1/4″)
- Redesigned base with grooved back surface for smoother operation
- Compact design at only 231 mm (9-1/8″) long and weighs only 2.6 kg (5.7 lbs) for less operator fatigue
- Can be used with wet or dry type wheels (country-specific)
- Water supply tube holder allows for easy installation/removal of the tube
- Easy alignment of base end with the cutting line on workpiece
- Specialized for right angle cutting only
- Easy to adjust depth gauge for precision cutting
- Flat rear end is convenient for replacing the diamond wheel
- Large top handle design for increased comfort
- Lock-off button helps prevent accidental starts (For tool with Lock-off button)
- Lock-on button for continuous use operation (For tool with Lock-on button)
- On-tool hex wrench for fast and easy blade changes and keeping it from lost
- Externally accessible brushes for greater serviceability
- Double insulated
Portable Cut-off
355 mm (14″) 2,200 W Portable Cut-Off
- 2,200 W continuous rating input (for high voltage areas only); The same high value as the competing models is achieved by changing the armature winding and by redesigning the air-cooling
- High performance and durability at less expense
- Powerful 2,200 W motor delivers 3,900 RPM for superior performance and durability
- Large cutting capacity; Cuts up to 127 mm (5″) round and 102 mm (4″) x 194 mm (7-5/8″) rectangular
- Adjustable spark guard designed to divert sparks
- Two-stage lock-off power button for operator convenience (country-specific)
- Adjustable guide plate provides three angle settings up to 45° L/R
- Chain secures cutting head in down position for transport and storage
- Large ergonomic handle (horizontal) allows for smooth saw head operation with reduced fatigue
- Carrying handle is ergonomically positioned to provide a balanced weight distribution for increased comfort while transporting the saw
- Lightweight for increased job site portability
- Quick release vise for increased operator convenience
- Onboard hex wrench for fast and easy blade changes and keeping it from lost
- Spindle lock for easy wheel changes
- Externally accessible brushes for easy serviceability
- Double insulated
Demolition Hammer
7.2 J Demolition Hammer, accepts 17 mm Hex Shank Bits
- High performance and durability at less expense
- Satisfactory chipping performance
- Soft grip provides more comfort and control
- Compact and lightweight design for reduced operator fatigue
- Easy-to-hold barrel-chuck section for easier two-handed push chiseling
- Double insulated
Rotary Hammer
22 mm (7/8″) 1.9 J Rotary Hammer, SDS-PLUS Bits
- High performance and durability at less expense
- Re-located operating mode lever for increased protection and durability
- Improved bit guide for increased bit stability during drilling applications
- Easy-to-grip handle gives maximum power thrust and provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
- Soft grip provides more comfort and control
- Powerful 710 W motor delivers 1.9 J of impact energy to handle the most demanding applications
- Torque limiter stops rotation if bit jams for increased operator safety and enhanced motor protection
- Forward/reverse lever – position of the switch allows brushes to be positioned so that the drill maintains same speed and torque in forward and reverse
- 2-mode operation for “Rotation Only” or “Hammering with Rotation”
- Variable speed trigger allows operator to adjust speed based on materials or application
- One-touch sliding chuck for easy bit installation and removal
- Depth gauge for increased drilling consistency
- Recessed lock-on button for continuous use
- Double insulated
Mixer
165 mm (6-1/2″) 800 W Variable Speed Mixer
- High performance and durability at less expense
- Powerful 800 W motor for improved mixing performance
- Variable speed trigger allows operator to adjust speed based on materials or application
- Suitable for mixer paddles up to Ø165 mm (6-1/2″) with a M12 or M14 thread (country-specific)
- D-handle can be attached (country-specific)
- Soft grip for increased operator comfort
- Compact and lightweight for reduced operator fatigue
- Externally accessible brushes for easy serviceability
- Double insulated
Hammer Drill
16 mm (5/8″) 500 W Variable Speed Reversing Hammer Dril with Keyed Chuck
- High performance and durability at less expense
- Powerful 500 W motor with 0-3,200 RPM & 0-48,000 BPM for the most demanding applications
- In-line positive grip design maximises power thrust
- Recessed lock-on button for continuous use
- Reversing switch is conveniently located
- 360° swivel side handle
- Variable speed control dial enables user to match the speed to the application
- 2-mode operation for “Rotation Only” or “Hammering with Rotation” for multiple applications
- Double insulated
Drill
13 mm (1/2″) 800 W Variable Speed Drill with Keyed Chuck
- High performance and durability at less expense
- Powerful 800 W motor with variable speed for improved mixing and drilling performance
- Variable speed (0 – 700 RPM) for mixing and drilling in a wide variety of materials
- Lightweight for reduced operator fatigue
- Optional D-handle can be attached
- Soft grip for increased operator comfort
- 13 mm (1/2″) drill chuck engineered for positive bit retention
- Large trigger switch for smooth and easy operation
- Ideal for mixing drywall mud, plaster and drilling large holes and more
- Externally accessible brushes for easy serviceability
- Double insulated
High Speed Drill
6.5 mm (1/4″) 230 W High Speed Variable Speed Reversing Drill with Keyed Chuck
- High performance and durability at less expense
- Ideal for drilling smaller holes in wood & steel
- High speed 0-4,500 RPM for fast drilling
- Variable speed trigger allows operator to adjust speed based on materials or application
- Powerful 230 W motor for continuous operation
- Soft grip handle provides increased comfort on the job
- In-line positive grip design maximises power thrust
- Compact and lightweight for reduced operator fatigue
- Recessed lock-on button for continuous use
- Reversing switch lever is conveniently located
- Depth gauge for increased drilling consistency (country-specific)
- 6.5 mm (1/4″) drill chuck engineered for positive bit retention
- Double insulated
Drill
10 mm (3/8″) 400 W Variable Speed Reversing Drill with Keyed Chuck
- High performance and durability at less expense
- Variable speed trigger allows operator to adjust speed based on materials or application
- Powerful 400 W motor for continuous operation
- In-line positive grip design maximises power thrust
- Compact and lightweight for reduced operator fatigue
- Recessed lock-on button for continuous use
- Reversing switch lever is conveniently located
- Double insulated
High Pressure Washer
Professional Power Washer
- High durable construction for heavy duty tasks and prolonged use
- High power motor generates highly 500L/hour flow
