RM350D

Robotic Mower

18V Li-Ion BL 24 cm (9-1/2″) Robotic Mower

• 18V Li-Ion BL 24 cm (9-1/2″) Robotic Mower
• A robotic mower designed to mow the lawn and recharge automatically to achieve a high operation rate of 3,500m² due to fast charging
• The main features and benefits are:
  • Specifying work area with wires
  • Random running
  • Maintenance software-supported
• Max work area: 3,500 m²
  • Maximum work area greater than competing models has been achieved by shortening charging time
• Washable with water
  • The top cover can be removed to wash the entire machine
  • Reduces the burden of off-season maintenance
• Determining the cutting height
  • If the lawn is high, user can let the mower automatically mow the lawn down to a desired height gradually in stages over several days by setting the starting height and desired height in the mower
  • Setting range of cutting height is 20 – 60mm, 5 mm increments (9 stages)
• Automatic mowing and automatic charging
  • Automatic mowing and charging reduces the labor required for lawn maintenance
  • A boundary wire and up to two guide wires control traveling of the robotic mower
• Max climbing angle 26°
  • Mows even on undulating lawn due to the high traveling performance on slopes
• High maintainability
  • The operation of multiple motors, sensors, lights, etc. can be examined individually by connecting the mower to PC with a cable and using the dedicated maintenance software
  • Easy to identify defective parts and check the operation after repairs
• Mowing start position setting
  • Up to 5 start positions for mowing can be set
  • If the setting position is not at the station, the robotic mower travels along wires and starts mowing in a random mode
  • It is possible to control mowing frequency variation in areas where mowing is less frequent, such as at the end of narrow aisles
• Schedule Setting
  • Mowing can be scheduled at the user’s convenience by setting the days of the week and time to mow the lawn
• Spiral cut
  • Detects an area where the lawn cannot be mowed smoothly due to long or dense lawns (high load on machine), and gradually mows the area in a spiral shape for minimum uncut area
• Cutting width 240mm
• Three swing back blades
  • Eliminate impacts when hit by stones, etc
  • The blades can be replaced with a single screw per blade
• Theft-deterrent
  • Setting a PIN code and the alarm function deter theft of the machine
  • Turning on/off the alarm function when the machine is stopped and the necessity of the PIN code input when resuming operation can be set as follows:
  – When the machine is stopped: PIN or PIN & Alarm
  – When it is detected that the machine has been lifted: PIN & Alarm
  – When it is detected that the machine has been tilted: PIN & Alarm