DSC251

Cordless Steel Rod Cutter

18V LXT BL ADT Cordless 25 mm (1″) Steel Rod Cutter

• Excellent Flush Cutting
• Flangeless blade can be equipped
• Ideal for edge cutting of threaded rods and rebars
• Fine edge cutting: Rebars can be cut at 3.5 mm from the corner of lattice for both vertically and horizontally; Threaded rods can be cut also at 3.5 mm from the ground/surface
• Less damage to the threaded rods and therefore nuts can be installed without removing burrs
• ADT (Automatic torque Drive Technology) adjusts speed and torque during operation for optimum performance
• BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
• BL motor is electronically controlled to optimize battery energy use for longer run time per charge
• BL motor efficiently uses energy to match torque and RPM to the changing demands of the application
• 3-position removable side grip allows operator to hold tool at comfortable position
• Surface treatment of base cover minimizes abrasion at cutting
• Dust bag collects chips or shavings left after cutting metal
• Cutting capacity range of 10 – 25 mm (3/8″ – 1″) standard rebar
• Highly visible, heavy-duty fluorescent material guide holds the rebar at 90° to the cutting blade and assists in smooth cutting
• Ergonomic handle with soft grip provides increased comfort on the job
• Spark free cutting of rebar and steel rod ideal for use in sensitive areas
• Wire mesh intake covers are engineered to minimize debris from entering motor
• Lightweight for reduced operator fatigue
• 3-stage LED gauge indicates battery charge level / overheating / overload.
  Battery protection circuit protects against overloading, over-discharging and over-heating.
  Up to 50 cuts of 25 mm rebar with a 5.0Ah LXT battery.
  Up to 90 cuts of 19 mm rebar with a 5.0Ah LXT battery.
  Up to 135 cuts of 16 mm rebar with a 5.0Ah LXT battery.
  Up to 200 cuts of 13 mm rebar with a 5.0Ah LXT battery.
  Up to 300 cuts of 10 mm rebar with a 5.0Ah LXT battery.